Amabili | Angeles | Baliga | Barthelat | Bergthorson | Cortelezzi | Fried | Frost | Habashi | Haller | Higgins | Hubert | Kovecses | Lee J.H.S. | Lee T. | Lessard | Mateescu | Misra | Mongeau | Mongrain | Mydlarski | Nadarajah | Nahon | Paidoussis | Pasini | Radziszewski | Sharf | Thomson | Timofeev | Vengallatore | Zsombor-Murray |
AMABILI, M.
Journal Publications
- Amabili, M., 2010, Geometrically nonlinear vibrations of rectangular plates carrying a concentrated mass, J. of Sound and Vibrations, Vol. 329, pp. 4501-4514.
- Amabili, M., and Carra, S., 2009, Thermal effects on geometrically nonlinear vibrations of rectangular plates with fixed edges, J. of Sound and Vibration, Vol. 321(3-5) pp. 936-954.
-Amabili, M., Carra, S., Collini, L, Garziera, R., and Panno, A., 2010, Estimation of tensile force in tie-rods using a frequency-based identification method, J. of Sound and Vibration, Vol. 329, pp. 2057-2067.
- Amabili, M., Karagiozis, K., and Païdoussis, M.P., 2009 Effect of geometric imperfections on nonlinear stability of circular cylindrical shells conveying fluid, International J. of Non-Linear Mechanics, Vol. 44 (3), pp. 276-289.
- Amabili, M., and Reddy, J.N., 2010, A new non-linear higher-order shear deformation theory for large-amplitude vibrations of laminated doubly curved shells, International J. of Non-linear Mechanics, Vol. 45(4), pp. 409-418.
- Karagiozis, K., Amabili, M., and Païdoussis, M.P., 2010, Nonlinear dynamics of harmonically excited circular cylindrical shells containing fluid flow, J. of Sound and Vibration, Vol. 329(18), pp. 3813-3834.
- Kurylov, Y. and Amabili, M., 2010, Polynomial versus trigonometric expansions for nonlinear vibrations of circular cylindrical shells with different boundary conditions, J. of Sound and Vibration, Vol. 329, pp. 1435-1449.
Conference Proceedings
- Amabili, M.,and Carra, S., 2009, Proc. of the 16th International Congress on Sound and Vibration (ICSV 16), 5-9 July, Kraków, Poland. Comparison of shear deformable and classical theories for nonlinear vibrations of rectangular and laminated composite plates.
- Amabili, M. and Carra, S., 2009, Proc. of the ASME Design Technical Conference, (DETC2009-86113), August 13-19, San Diego, CA, USA. Thermal effects on geometrically nonlinear vibrations of rectangular plates with fixed ends.
- Amabili,M., Karagiozis, K., and Païdoussis, M.P., 2009, Proc. of the 16th International Congress on Sound and Vibration (ICSV 16), 5-9 July, Kraków, Poland. Nonlinear vibrations of circular cylindrical shell conveying flowing fluid.
- Amabili,M., K. Karagiozis, and M.P Païdoussis, 2009, Proc. of the ASME Design Technical Conference, (DETC2009-86114), August 13-19, 2009, San Diego, CA, USA. Nonlinear vibrations and stability of shells conveying water flow.
ANGELES, J.
Journal Publications
- ANGELES, J., 2010, On the Nature of the Cartesian Stiffness Matrix,” Revista de la Sociedad Mexicana de Ingeniería Mecánica, Vol. 3(5), pp. 163-170.
- Altuzarra, O., Salgado, O., Hernandez, A., and ANGELES, J., 2009, Multiobjective optimum design of a symmetric parallel Schönflies-motion generator, ASME J. of Mechanical Design, Vol. 131(3), pp. 031002-1--031002-11.
- Bai, S. and ANGELES, J., 2009, The design of spherical multilobe-cam mechanisms, Proc. IMechE, Part C: J. Mechanical Engineering Science, Vol. 223(C2), pp. 473--482.
- Cammarata, A., ANGELES, J., and Sinatra, R., 2009, The dynamics of parallel Schönflies motion generators: the case of a two-limb system, Proc. IMechE Vol. 222 Part I, J. Systems and Control Engineering, Vol. 223(11), pp. 29--52.
- Cammarata, A., ANGELES, J., and Sinatra, R., 2010, Kinetostatic and Inertial Conditioning of the McGill Schönflies-Motion Generator, Advances in Mechanical Engineering, Vol. 2010, Article ID 186203, DOI: 10.1155/2010/186203.
- Cardou, P. and ANGELES, J., 2009, Linear estimation of the rigid-body acceleration field from point-acceleration measurements, ASME J. Dynamic systems, Measurement, and Control, Vol. 131, pp. 041013-1--041013-10.
- Caro, S., Khan, W.A., Pasini, D., and ANGELES, J., 2010, The rule-based conceptual design of the architecture of serial Schönflies-motion generators, Mechanism and Machine Theory, Vol. 45(2), pp. 251-260.
- Desrochers, S., Pasini, D., and ANGELES, J., 2010, Optimum design of a compliant uniaxial accelerometer, ASME J. Mechanical Design,Vol. 132(4), pp. 041011-1-041011-8.
- Gauthier, J.-F., ANGELES, J., Nokleby, S., and Morozov, A., 2009, The kinetostatic conditionning of two-limb Schönflies motion generators, ASME J. of Mechanisms and Robotics, Vol. 1(1), pp. 011010-1--011010-12.1.
- Oryschuk, P., Salerno, A., Al-Husseini, A.M., and ANGELES, J., 2009, Experimental validation of an underactuated two-wheeled mobile robot, IEEE/ASME Transactions on Mechatronics, Vol. 14(2), pp. 252--257.
- Ossino, A., Barnett, E., ANGELES, J., Pasini, D., and Sijpkes, P., 2010, Path Planning for robot-assisted rapid prototyping of ice structures, CSME Transactions, Vol. 33(4), pp. 689-700.
Books
- ANGELES, J., Boulet, B., Clark, J.J., Kövecses, J., and Siddiqi, K. (Eds.), 2010, Brain, Body and Machine, Springer-Verlag, Berlin-Heidelberg.
Conference Proceedings
- ANGELES, J., 2010, Robust drives for parallel robots, in Parenti-Castelli, V. and Schielen, W. (Eds.), RobotDesign, Dynamics, and Control, pp.19-28, RoManSy 18, Springer,Vienna.
- Alizadeh, D., ANGELES, J., and Nokleby, S., 2009, On the computational of the home posture of the McGill Schönflies-Motion generator, Proc. 5th International Workshop on Computational Kinematics CK 2009, Duisburg, Germany, May 6--8.
- Alizadeh, D., ANGELES, J., and Nokleby, S., 2010, Optimum design of a pan-tilt drive for parallel robots, in Lenarčič, J. and Stanisic, M. (Eds.), Advances in Robot Kinematics. Motion in Man and Machine, pp. 169-176, Springer, Dordrecht.
- Al-Widyan, K. and ANGELES, J., 2010, The robust linkage synthesis for planar rigid-body guidance, Proc. ASME Int. Design Engineering Technical Confs. & Computers and Information in Engineering Conf., DETC2010-28308, Montreal, Quebec, Aug. 15-18.
- ANGELES, J. and Bai, S.P., 2010, A robust solution of the spherical Burmester problem, Proc. ASME Int. Design Engineering Technical Confs. & Computers and Information in Engineering Conf., DETC2010-28189, Montreal,Quebec, Aug. 15-18.
- Azar, T., ANGELES, J., Kövecses, J., and Cecere, R., 2010, The mathematical model of a procedure for percutaneous annuloplasty', Proc. ASME Int. Design Engineering Technical Confs. & Computers and Information in Engineering Conf., DETC2010-28916, Montreal, Quebec, Aug. 15-18.
- Barnett, E., ANGELES, J., Pasini, D. and Sijpkes, P., 2009, Robot assisted rapid prototyping for ice structures', Proc. IEEE Int. Conf. Robotics and Automation, ICRA 2009, Kobe, Japan, May 12--17.
- 8. Barnett, E., ANGELES, J., Pasini, D. and Sijpkes, P., 2010, Trajectory control for an innovative rapid freeze prototyping system, Proc. ASME Int. Design Engineering Technical Confs. & Computers and Information in Engineering Conf., DETC2010-28227, Montreal, Quebec, Aug. 15-18.
- Barnett, E., ANGELES, J., Pasini, D. and Sijpkes, P., 2010, A heuristic algorithm for slicing in the rapid freeze prototyping of sculptured bodies, in ANGELES, J. Boulet, B., Clark, J.J., Kövecses, J. and Siddiqi, K. (Eds.), Brain, Body and Machine, pp. 149-162, Springer-Verlag, Berlin-Heidelberg.
- Figliolini, G. Rea, P. and ANGELES, J., 2010, Synthesis of the pitch surfaces of non-circular skew-gears, Proc. ASME Int. Design Engineering Technical Confs. & Computers and Information in Engineering Conf., DETC2010-28902, Montreal, Quebec, Aug. 15-18.
- Javid, F., ANGELES, J., Pasini, D. and Cecere, R., 2010, Optimum design of an anchoring system for percutaneous mitral valve repair, Proc. ASME Int. Design Engineering Technical Confs. & Computers and Information in Engineering Conf., DETC2010-28462, Montreal, Quebec, Aug. 15-18.
- Ma, X.Q., Chopra, V., ANGELES, J., and Hauggard, M.A., 2009, Modelling and simulation of the testbed for a pitch-roll wrist prototype based on spherical cam-rollers', Proc. CCToMM M3 Symposium, Quebec, May 28--29.
- Ossino, A. Barnett, E., ANGELES, J., Pasini, D. and Sijpkes, P., 2009, Path Planning for Robot-Assisted Rapid Prototyping of Ice Structures', Proc. CCToMM M3 Symposium, Quebec, Canada, May 28--29.
BALIGA, B.R.
Journal Publications
- Duplain, E. and BALIGA, B.R., 2009, Computational optimization of the thermal performance of internally finned ducts, International J. of Heat and Mass Transfer, Vol. 52, pp. 3929-3942.
- Jesuthasan, N. and BALIGA, B.R., 2009, A numerical method for three-dimensional parabolic flow and heat transfer in straight ducts of irregular cross section, Computational Thermal Sciences, Vol. 1, pp. 259-288.
Conference Proceedings
- Camargo, L., Gitsham, M., and BALIGA, B.R., 2009, Measurements of mean heat transfer coefficients for turbulent forced convection in a rectangular duct with uniformly spaced plate inserts, Proc. ASME Summer Heat Transfer Conference, Paper # HT2009-88510, pp. 1-10, San Francisco, July 19-23.
- Jesuthasan, N. and BALIGA, B.R., 2009, Steady-state segmented thermofluid network simulations of a loop heat pipe operating with four different working fluids, Proc. ASME Summer Heat Transfer Conference, Paper # HT2009-88411, pp. 1-10, San Francisco, July 19-23.
- Jesuthasan, N. and BALIGA, B.R., 2010, Modeling Laminar Fluid Flows in Rectangular Vapor Grooves of Evaporators Used in Loop Heat Pipes, Proc. of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Paper # FEDSM-ICNMM2010-31129, pp. 1-10, Montreal, August 1-5.
- Oliveira, L.A., Lopes, A.M.G., BALIGA, B.R., Viegas, C.X., and Viegas, D.X., 2010, Numerical Predictions of Properties and Trajectories of Wind Driven Firebrands, Proc. VI International Conference on Forest Fire Research, Paper # 339, pp. 1-17, Coimbra, Portugal, August 15-18.
- Sivov, T.G., Palacios-Gamez, R., and BALIGA, B.R., 2010, Computational Modeling of Thermal Energy Storage in Rock Beds, Proc. of ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Paper # FEDSM-ICNMM2010-31130, pp. 1-12, Montreal, August 1-5.
- Scott, D.A., Lamoureux, A., and BALIGA, B.R., 2010, Computational Investigation of Laminar Mixed Convection in a Vertical Pipe with Slurries of a Microencapsulated Phase-Change Material in Distilled Water, Proc. of the International Heat Transfer Conference (IHTC14), Paper # IHTC-14-22974, pp. 1-12, Washington, DC, August 8-13.
BARTHELAT, F.
Journal Publications
- Barthelat, F., 2010, Nacre from mollusk shells: a model for high-performance structural materials, Bioinspiration & Biomimetics, Special Issue: Biomimetics of Aquatic Life - Applications for Engineering, Vol. 5(3), pp. 1-8.
- Espinosa, H.D., Rim, J.E., Barthelat, F., Buehler, M.J., 2009, Merger of Structure and Material in Nacre and Bone - Perspectives on de novo Biomimetic Materials, Progress in Materials Science, Vol. 54, pp. 1059-1100.
- Poissant, J. and Barthelat, F., 2010, A Novel “Subset Splitting” Procedure for Digital Image Correlation on Discontinuous Displacement Fields, Experimental Mechanics, Vol. 50(3) pp. 353-364.
- Rabiei, R., Bekah, S., and Barthelat, F., 2010, Failure mode transition in nacre and bone-like materials, Acta Biomaterialia, 6, pp. 1081-4089.
- Vernerey, F. and Barthelat, F., 2010, On the Mechanics of Fish-Scale Structures, International J. of Solids and Structures, Vol. 47(17), pp. 2268-2275.
Conference Proceedings
- Barthelat, F. and Rabiei, R., 2009, Micromechanics of fracture in nacre from mollusk shells, Proc. of the 12th International Conference on Fracture. Ottawa, July 12-17.
- Poissant, J. and Barthelat, F., 2009, A Novel Digital Image Correlation Procedure for Discontinuous Displacement Fields, Proc. of the Society for Experimental Mechanics Annual Meeting, Albuquerque NM, June 1-3.
- Rabiei, R. and Barthelat, F., 2009, Micromechanics of fracture in sheet and columnar nacre, Proc. of the Society for Experimental Mechanics Annual Meeting, Albuquerque NM, June 1-3.
- Yourdkhani, M., Pasini, D., and Barthelat, F., 2010, The hierarchical structure of seashells optimized to resist mechanical threats, WIT Transactions on Ecology and the Environment, 138, pp. 141-152.
BERGTHORSON, J.M.
Journal Publications
- Akih-Kumgeh, B., and Bergthorson, J.M., 2010, Comparative study of methyl butanoate and n-heptane high temperature autoignition. Energy & Fuels, Vol. 24, pp. 2439-2448.
- Akih-Kumgeh, B., and Bergthorson, J.M., 2010, Shock tube study of methyl formate ignition. Energy & Fuels, Vol. 24, pp. 396-403.
- Akih-Kumgeh, B. and Bergthorson, J.M., 2010, Tailoring ethanol high temperature ignition by means of chemical additives and water content. SAE International J. of Fuels & Lubricants, Vol. 3(2), pp. 598-609.
- Benezech, L.J., Bergthorson, J.M., and Dimotakis, P.E., 2009, Premixed laminar C3H8- and C3H6-air stagnation flames: experiments and simulations with detailed kinetic models. Proce. of the Combustion Institute, Vol. 32, pp. 1301-1309.
- Bergthorson, J.M., Johnson, M.B., Bonanos, A,M., Slessor, M.D., Su, W., and Dimotakis, P.E., 2009, Molecular mixing and flowfield measurements in a recirculating shear flow. Part I: subsonic flow. Flow, Turbulence and Combustion, Vol. 83, pp. 269-292.
- Bonanos, A.M., Bergthorson, J.M., and Dimotakis, P.E., 2009, Molecular mixing and flowfield measurements in a recirculating shear flow. Part II: supersonic flow. Flow, Turbulence and Combustion Vol. 83, pp. 251-268.
- Noorani, K.E., Akih-Kumgeh, B., and Bergthorson, J.M., 2010, Comparative high temperature shock tube ignition of C1-C4 primary alcohols. Energy & Fuels, Vol. 24(11), pp. 5834-5843.
Conference Proceedings
- Akih-Kumgeh, B. and Bergthorson, J.M., 2009, Autoignition of methyl butanoate as a biodiesel surrogate, Proc. of the 22nd International Colloquium on the Dynamics of Explosions and Reactive Systems, paper number 192.
CORTELEZZI, L.
Journal Publications
- Gubanov, O. and. Cortelezzi, L., 2010, Towards the design of an optimal mixer, J. of Fluid Mechanics, Vol. 651, pp. 27-53.
Books
- L. Cortelezzi and I. Mezic (Eds.), Analysis and Control of Mixing with an Application to Micro and Macro Flow Processes, CISM International Centre for Mechanical Sciences, Vol 510, pp. 365-414, Springer, Wien, New York.
Conference Proceedings
- Gubanov, O. and Cortelezzi, L., 2009, Sensitivity of mixing optimization to the geometry of the initial scalar field, in Analysis and control of mixing with an application to micro and macro flow processes,
- L. Cortelezzi and I. Mezic (Eds.), CISM International Centre for Mechanical Sciences, Number 510, pp. 365-414, Springer Wien, NewYork.
FRIED, E.
Journal Publications
- Duda, F.P., Souza, A.C., Fried, E.i , 2010, Theory for species migration in a finitely strained solid with application to polymer network swelling. J. of the Mechanics and Physics of Solids Vol. 58, pp. 515–529.
- Elson, E.L., Fried, E.i , Dolbow, J.E., Genin G.M., 2010. Phase separation in biological membranes: Integration of theory and experiment, Annual Review of Biophysics Vol. 39, pp. 207–226.
- Fried, E.i , 2010, New insights into the classical mechanics of particle systems. Discrete and Continuous Dynamical Systems, Vol. 28, pp. 1469-1504.
- Fried, E.i , and Gurtin, M.E., 2009, Gradient nanoscale polycrystalline elasticity: Intergrain interactions and triple-junction conditions, J.of the Mechanics and Physics of Solids 57, pp.1749–1779.
- Kim, T.-Y, Cassiani, M., Albertson, J.E., Dolbow, J., Fried, E.i , and Gurtin, M.E., 2009, Impact of the inherent separation of scales in the Navier–Stokes-αβ equation, Physical Review, E 79045307(R).
- Shklyaev, A., Shen, A.Q., and Fried, E.i , 2009, Stability of a sharp uniaxial-isotropic phase interface, J. of Colloid and Interface Science, 339, pp. 502–510.
- Shklyaev, O.E., Shen, A.Q., and Fried, E.i , 2009, Evolution equation for a disclination line located between the uniaxial and isotropic phases of a nematic liquid-crystal, Journal of Colloid and Interface Science 329, pp.140–152.
- Ulrich, X., Fried, E.i , and Shen, A.Q., Crossover transition in granular chain systems, Physical Review E 80 (2009) 030301(R).
Books
- Fosdick, R., Fried, E.i , 2010. Statistical Mechanics, Molecular Modeling, and the Notion of Stress. Springer. (This is an edited collection of papers with a foreword by Fosdick and Fried.)
- Gurtin, M.E., Fried, E.i , Anand, L., 2010, The Mechanics and Thermodynamics of Continua. Cambridge University Press.
FROST, D.L.
Journal Publications
- Brandstadt K., Frost, D.L. , and Kozinski, J.A.,2009, Preignition characteristics of nano- and micrometer-scale aluminum particles in Al–CO2 oxidation systems, Proc. of the Combustion Institute, 32, pp. 1913–1919.
Conference Proceedings
- Cairns, M., Frost, D.L. , and Goroshin, S., 2009, Effect of oxygen concentration on the combustion of titanium particles, Proc. of 22nd International Colloquium on the Dynamics of Explosions and Reactive Systems, Minsk, Belarus, Jul. 26 – Jul. 31.
- Frost, D.L. , Cairns, M., Goroshin, S., and Zhang, F., 2009, Effect of particle morphology on the reactivity of explosively dispersed titanium particles,” Proc. of 16th APS Topical Conference on Shock Compression of Condensed Matter, Nashville, TN, Jun 28 – Jul 3.
- Frost, D.L. , Goroshin, S., Cairns, M., Ripley, R.C., and Zhang, F., 2009, Temperature measurements in a multiphase fireball, Proc. of 22nd International Colloquium on the Dynamics of Explosions and Reactive Systems, Minsk, Belarus, Jul. 26 – Jul. 31.
- Frost, D.L. , Goroshin, S., Ripley, R.C., and Zhang, F., 2010, Interaction of a blast wave with a metalized explosive fireball, Proc. of 14th International Detonation Symposium, Coeur d’Alene, Idaho, April 11-16.
- Frost, D.L. , Goroshin, S., Ripley, R.C., and Zhang, F., 2010, Jet formation during explosive particle dispersal, Proc. 21th International Symposium on Military Aspects of Blast and Shock, Oct. 3 – Oct. 8, Jerusalem, Israel.
- Frost, D.L. , and Zhang, F., 2009, Slurry Detonations”, in Shock Waves Science and Technology Reference Library, Vol 4: Heterogeneous Explosion, F. Zhang, (Ed.), Springer-Verlag, pp. 169-216.
- Frost, D.L. , Jette, F.-X., Goroshin, S., Higgins, A.J., and Lee, J.J., 2009, Effect of particle morphology on critical conditions for shock-initiated reactions in titanium-silicon powder mixtures, Proc. of 16th APS Topical Conference on Shock Compression of Condensed Matter, Nashville, TN, Jun. 28 – Jul. 3.
- Goroshin, S., Frost, D.L. , Ripley, R.C., and Zhang, F., 2010, Measurement of particle density during explosive particle dispersal,” Proc. 21th International Symposium on Military Aspects of Blast and Shock, Oct. 3 – Oct. 8, Jerusalem, Israel.
- Jette, F.-X., Goroshin, S., Higgins, A.J., Frost, D.L. , and Lee, J.J., 2009, Time-resolved temperature measurements of shock initiation in heterogeneous exothermic mixtures, Proc. of 16th APS Topical Conference on Shock Compression of Condensed Matter, Nashville, TN, Jun. 28 – Jul. 3.
- Petel, O.E., Jette, F.X., Cairns, M., Goroshin, S., Frost, D.L. , and Ouellet, S., 2009, Blast wave attenuation through composites of varying layer distribution,” Proc. of 27th International Symposium on Shock Waves, St. Petersburg, Russia, Jul. 19 – 24.
- Petel, O., Jette, F.-X., Goroshin, S., Frost, D.L. , and Ouellet, S., 2010, Blast wave attenuation in protective applications, Proc. 21th International Symposium on Military Aspects of Blast and Shock, Oct. 3 – Oct. 8, Jerusalem, Israel.
- Ripley, R.C., Donahue, L., Frost, D.L. , and Zhang, F., 2010, Enhanced loading due to reflected heterogeneous blast, Proc. 21th International Symposium on Military Aspects of Blast and Shock, Oct. 3 – Oct. 8, Jerusalem, Israel.
- Ripley, R.C., Leadbetter, J., Zhang, F., and Frost, D.L. , 2009, Acceleration of solid particles in explosive dispersal,” Proc. of 27th International Symposium on Shock Waves, St. Petersburg, Russia, Jul. 19 – 24.
- Zarei, Z, Frost, D.L. , and Timofeev, E.V., 2009, Particle entrainment in supersonic flow, Proc. of 27th International Symposium on Shock Waves, St. Petersburg, Russia, Jul. 19 – 24.
HABASHI, W.G.
Journal Publications
- Aubé, M.S., Baruzzi, G.S., Habashi, W.G. ,and Torok, D., 2010, On the impact of Mesh Adaptation on Computational Wind Engineering, International J. of Numerical Methods in Fluids, Volume 63, pp. 877–886
- Croce, G., De Candido, E., Habashi, W.G. , Munzar, J., Aubé, M.S., Baruzzi, G.S., and. Aliaga, C.N., 2009, FENSAP-ICE: A Numerical Model for Predicting Spatial and Temporal Evolution of In-flight Icing Roughness, AIAA Journal of Aircraft, No. 47143, December.
- Habashi, W.G. , 2009, Advances in CFD for In-Flight Icing Simulation, J. of Japan Society of Fluid Mechanics, Vol. 28(2), pp. 99-118. (Invited Article.)
- Habashi, W.G. , 2010, FENSAP-ICE: A Numerical Model for Predicting Spatial and Temporal Evolution of In-flight Icing Roughness, AIAA J.of Aircraft, Vol. 47(4), pp. 1283-1289.
- Habashi, W.G. , 2010, Toward Real-Time Aero-Icing Simulation for Complete Aircraft Configurations, via FENSAP-ICE”, AIAA J. of Aircraft, Vol. 27)1), pp. 96-109.
- Habashi, W.G. , 2010, On the Impact of Anisotropic Mesh Adaptation on Computational Wind Engineering, International J. of Numerical Methods in Fluids, Vol. 63(7), pp. 877-886.
- Remaki, L. and Habashi, W.G. , 2009, A Hermite-Based Mesh Adaptation for CFD Functional Output, AIAA Journal, Vol. 47(8) pp. 1965-1976.
- Remaki, L. and Habashi, W.G. , 2009, A posteriori Error Estimate Improvement In Mesh Adaptation for Computer Fluid Dynamics Applications, Proc. IMechE, Part C: J. Mechanical Engineering Science, Vol. 223(C5), pp. 1117-1126.
Conference Proceedings
- Habashi, W.G. 2010, An Arbitrary Lagrangian-Eulerian Mesh Movement Scheme for Long-Term In-Flight Ice Accretion, Proc.of 18th Conference of the CFD Society of Canada, London, June.
HALLER, G.
Journal Publications
- T. Sapsis & G. Haller, 2009, Inertial particle dynamics in a hurricane, J. Atmospheric Sciences, 66, pp. 2481-2492.
- W. Tang, G. Haller, J.-J. Baik, & Y. H. Ryu, 2009 Locating an atmospheric contamination source using slow manifolds, Phys. Fluids, 21 043302 (pp. 1-7)
- Tang, W., Mathur, M., G. Haller, G. , Hahn, D.C., and Ruggiero, F.H., 2010, Lagrangian coherent structures near a subtropical jet stream, J. Atmospheric Sci., Vol. 67, pp. 2307-2319.
- Haller, G. , and Sapsis, T., 2010, Localized instability and attraction along invariant manifolds, SIAM J. on Appl. Dynamical Systems, Vol. 9, pp. 611-633.
- Tang, W., Chan, P.W., and Haller, G. , 2010, Accurate extraction of LCS over finite domains, with application to flight safety analysis over Hong Kong International Airport, CHAOS, Vol. 20, 017502 (pp. 1-8).
- Sapsis, T. and Haller, G. , 2010, Clustering criterion for inertial particles in 2D time-periodic and 3D steady flows, CHAOS, Vol.20, 017515 (pp. 1-11)
- Haller, G. , Uzer, T., Palacian, J., Janguas, P., and Jaffe, C., 2010, Transition states near rank-two saddles: Correlated electron dynamics of helium, Comm. Nonlinear Sci. Num. Simul, Vol. 15, pp. 48-59.
HIGGINS, A.J.
Journal Publications
- Jetté, F.X., Goroshin, S., Higgins, A.J. , and Lee, J.J., 2009, Experimental Investigation of Gasless Detonation in Metal-Sulfur Compositions, Combustion, Explosion, and Shock Waves, Vol. 45(2), pp. 211-217.
- Petel, O. and Higgins, A.J. , 2010, Shock Wave Propagation in Dense Particle Suspensions, J. of Applied Physics, Vol. 108(11), pp. 4918-4931.
- Tang, F.D., Higgins, A.J. , and Goroshin, S., 2009, The effect of discreteness on heterogeneous flames: propagation limits in regular and random particle arrays, Combustion Theory and Modelling, Vol. 13(2), pp. 319-341.
- Tang, F.D., Goroshin, S., Higgins, A.J. , and Lee, J.H.S., 2009, Flame propagation and quenching in iron dust clouds,” Proceedings of the Combustion Institute, Vol. 32(2), pp.1905-1912.
- Tanguay, V., Goroshin, S., Higgins, A.J. , and Zhang, F., 2009, Aluminum particle combustion in high-speed detonation products, Combustion Science and Technology, Vol. 181(4), pp. 670-693.
Conference Proceedings
- Tang, F.D., Goroshin, S., and Higgins, A.J. , 2010, Modes of Particle Combustion in Iron Dust Flames, Proc. of the 33rd International Symposium on Combustion, Beijing, China, August.
- Verreault, J. and Higgins, A.J. , 2010, Initiation of Detonation by Conical Projectiles, Proc. of the 33rd International Symposium on Combustion, Beijing, China, August.
HUBERT, P.
Journal Publications
- Ashrafi, B., Guan, J., Mirjalili, V., Hubert P. , Simard, B., and Johnston, A., 2010, Correlation between Young’s Modulus and Impregnation Quality of Epoxy-Impregnated SWCNT Buckypaper, Composites Part A, Vol. 41(9), pp. 1184-1191.
- Dubé, M., Hubert P. , Yousefpour, A., and Denault, J., 2009, Fatigue Failure Characterisation of Resistance-welded Thermoplastic Composites Skin/stringer Joints, International J. of Fatigue, Vol. 31, pp. 719-725.
- Hubert P. , Ashrafi, B., Adhikari, K., Meredith, J., Vengallatore, S., Guan, J., and Simard, B., 2009, Synthesis and Characterization of Carbon Nanotube Reinforced Epoxy – Viscosity and Elastic Properties Correlation, J. of Composites Science and Technology, Vol. 69, pp. 2274-2280.
- Khoun, L., Centea, T., and Hubert P. , 2010, Characterization methodology of thermoset resins for the processing of composite materials – Case study: CYCOM 890RTM epoxy resin, J. of Composite Materials, Vol. 44(11), pp. 1397-1415.
- Khoun, L. and, Hubert P. , 2010, Cure shrinkage characterization of an epoxy resin system by two in-situ measurement methods, Polymer CompositesVol. 31(9), pp. 1603-1610.
- Khoun, L. and Hubert P. , 2010, Investigation of the Dimensional Stability of Carbon Epoxy Cylinders Manufactured by Resin Transfer Moulding, Composites Part A, 2010, Vol. 41(1), pp. 116-124.
- Mirjalili, V. and Hubert P. , 2010, Modelling of the Carbon Nanotube Brudging Effect on the Toughening of Polymers and Experimental Verification, J. of Composites Science and Technology, Vol. 70(10), pp.1537-1543.
- Rahmat, M. and Hubert P. , 2010, Two-Phase Simulations of Micro Heat Pipes”, Computers & Fluids, Vol. 39(3), pp. 451-460.
- Rahmat, R. and Hubert P. , 2010, Interaction Stress Measurement Using Atomic Force Microscopy: A Stepwise Discretization Method, J. of Physical Chemistry C 114, pp.15029–15035.
- Rahmat, M. and Hubert P. , 2010, Geometric Optimization for a Thermal Microfluidic Chip, J. of Mechanical Science and Technology, Vol. 24(10), pp. 1–8.
Conference Proceedings
- Das, K., Hubert P. , and Vengallatore, S., 2010, Patterning Nanomaterials on Fragile Micromachined Structures using Electron Beam Lithography, Mater. Res. Soc. Symp. Proc. Volume 1299, Warrendale, .
- Das, K., Park, C., Le Faive, R., Hubert P. , and Vengallatore, S., 2010, Synthesis and Characterization of Nanocomposite Thin Films for MEMS Applications, in Microelectromechanical Systems — Materials and Devices III, Mater. Res. Soc. Symp. Proc. Volume 1222, Warrendale, PA.
KÖVECSES, J.
Journal Publications
- Carpentier, C., Font-Llagunes, J.M., and Kövecses, J., 2010, Dynamics and Energetics of Impacts in Crutch Walking, J. of Applied Biomechanics, Vol. 26, pp. 473-483.
- Ebrahimi, S.and Kövecses, J., 2010, Unit Homogenization for Estimation of Inertial Parameters of Multibody Mechanical Systems, Mechanism and Machine Theory, Vol. 45, pp. 438-453.
- Ebrahimi, S. and Kövecses, J., 2010, Sensitivity Analysis for Estimation of Inertial Parameters of Multibody Mechanical Systems, Mechanical Systems and Signal Processing, Vol. 24(1), pp. 19-28.
- Font-Llagunes, J.M. and Kövecses, J., 2009, Dynamics and Energetics of Bipedal Walking Systems, Mechanism and Machine Theory, Vol. 44, pp. 1999-2019.
- Font-Llagunes, J.M. and Kövecses, J., 2009, Efficient Dynamic Walking: Design and Control Strategies to Reduce Energetic Losses at Heel Strike, Mechanics Based Design of Structures and Machines, Vol. 37, pp. 259-282.
- Kövecses, J. and Ebrahimi, S., 2009, Parameter Analysis and Normalization for the Dynamics and Design of Multibody Systems,ASME J.of Computational and Nonlinear Dynamics, Vol. 4, 031008, pp. 1-10.
- Kövecses, J. and Font-Llagunes, J.M., 2009, An Eigenvalue Problem for the Analysis of Variable Topology Mechanical Systems, ASME J. of Computational and Nonlinear Dynamics, Vol. 4, 031006, pp. 1-9.
Books
- Angeles, J, Boulet, B., Clark, J.J., Kövecses, J., and Siddiqi, K., (Eds.), 2010, Brain, Body and Machine, Springer-Verlag, Berlin-Heidelberg.
Conference Proceedings
- Carpentier, C., Font-Llagunes, J.M., and Kövecses, J., 2009, Dynamic and Energetic Analysis of Impacts in Crutch Locomotion, Proc. 7th EUROMECH Solid Mechanics Conference, Mini-Symp. Biomechanics of Human Locomotion, pp. 9-10, Lisbon, Portugal, Sep. 7-11.
- Font-Llagunes, J. M., Barjau, A., Pàmies-Vilà, R., and Kövecses, J., 2010, Two Approaches for the Dynamic Analysis of Impact in Biomechanical Systems, Symposium on Brain, Body and Machine, topical paper, Montreal, Quebec, November 10-12.
- Font-Llagunes, J.M. and Kövecses, J., 2009, Dynamics of Non-Ideal Topology Transitions in Multibody Mechanical Systems, ASME Design Eng. Technical Conferences, 7th Int. Conf. Multibody Systems, Nonlinear Dynamics, and Control, Paper no. DETC2009-86883, San Diego, CA, Aug. 30-Sep 2.
- Font-Llagunes, J.M. and Kövecses, J., 2009, Analysis of Topology Changes in Multibody Systems, ECCOMAS Multibody Dynamics Conf., Paper no. 259, pp. 54-55, Warsaw, Poland, June 29-July 2.
- Font-Llagunes, J.M. and Kövecses, J., 2009, Analytical and Experimental Studies of the Dynamics of Variable Topology Systems.” ASME/IFToMM Int. Conf. on Reconfigurable Mechanisms and Robots, pp. 299-307, London, UK, June 22-24.
- Font-Llagunes, J.M. and Kövecses, J., 2009, On the Use of Impulsive Bilateral Constraints to Characterize Topology Transitions, CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Paper no.: CCToMM09-N01, Québec City, QC, May 28-29.
- Kövecses, J., Ghaffari, K., and Ebrahimi, S., 2009, Parametric Analysis of Mechanical Systems with Application to Nonholonomic Dynamics, ECCOMAS Multibody Dynamics Conf., pp. 128-129.
- Ruzzeh, B. and Kövecses, J., 2009, A Penalty Formulation for Dynamics Analysis of Redundant Mechanical Systems, ASME Design Eng. Technical Conferences, 7th Int. Conf. Multibody Systems, Nonlinear Dynamics, and Control, Paper no. DETC2009-87733, San Diego, CA, Aug. 30-Sep 2.
LEE, J.H.S.
Journal Publications
- Chao, J., Ng, H.D., and Lee, J.H.S., 2009, Detonation limits in thin annular channels. Proceedings of the Combustion Institute, Vol. 32(2), pp. 2349-2354.
- Camargo, A., Ng, H.D., Chao, J. and Lee, J.H.S., 2010, Propagation of near-limit gaseous detonations in small diameter tubes. Shock Waves J., Vol 20(6), pp. 499-508.
- Grondin J.S. and Lee, J.H.S., 2010, Experimental observation of the onset of detonation downstream of a perforated plate. Shock Waves J. Vol. 20(5), pp. 381-386.
- Kamenskihs, V., Ng, H.D., and Lee, J.H.S.,2010, Measurement of critical energy for direct initiation of spherical detonations in high-pressure H2-O2 mixtures, Combustion and Flame, Vol. 157(9), pp.1795-1799.
- Meredith, J., Ng, H.D., and Lee, J.H.S., 2010, Detonation diffraction from an annular channel. Shock Waves J.l, Vol.20(6), pp. 449-455.
LEE, T.
Journal Publications
- Lee, T., 2009, Aerodynamic characteristics of airfoil with perforated Gurney-type flaps, J. of Aircraft, Vol. 46(2), pp. 542-548.
- Lee, T., 2010, ,PIV study of the effect of perforated flaps on the trailing vortex wake, Experiments in Fluids, DOI:10.1007/s00348-010-0933-x, pp. 1-11.
- Lee, T. and Gerontakos, P., 2009, Unsteady airfoil with dynamic leading- and trailing-edge flaps, J. of Aircraft, Vol. 46(3)3, pp. 1076-1081.
- Lee, T. and Ko, L.S., 2009, PIV investigation of the flowfield behind porous trailing-edge flaps, Experiments in Fluids, Vol. 46(6), pp. 1005-1019.
- Lee, T. and Ko, L.S., 2009, On the vortex wake generated behind a forward swept wing, J. of Aircraft, Vol. 46(2), pp. 717-721.
- Lee, T., and Pereira, J., 2010, On the nature of wake- and jet-like axial tip-vortex flow, J. of Aircraft, Vol. 47(6), pp. 1946-1954.
- Lee, T., and Su, Y.Y., 2010, Lift enhancement and flow structure of airfoil with joint trailing-edge flap and Gurney flap, Experiments in Fluids, DOI:10.1007/s00348-010-1024-8, pp. 1-14.
LESSARD, L.
Journal Publications
- Ghiasi, H., Fayazbakhsh, K., Pasini, D., and Lessard, L., 2010, Review Paper: Optimum Stacking Sequence Design of Composite Materials, Part II: Variable Stiffness Design, Composite Structures 2010, doi: 10.1016/j.compstruct.2010.06.001.
- Ghiasi, H., Lessard, L., Pasini, D., and Thouin, M., 2009, Optimum Structural and Manufacturing Design of a Braided Hollow Composite Part, J. of Applied Composite Materials, October.
- Ghiasi, H., Lessard, L., Pasini, D., and Thouin, M., 2010, Optimum Structural and Manufacturing Design of a Braided Hollow Composite Part, J. of Applied Composite Materials, Vol. 17(2), pp.159-173.
- Ghiasi, H., Pasini, D., and Lessard, L., 2009, Optimum Stacking Sequence Design of Composite Materials, Part I: Constant Stiffness Design, Composite Structures, No. 90, pp. 1-11.
- Ghiasi, H., Pasini, D., and Lessard, L., (2010), Pareto Frontier for Simultaneous Structural and Manufacturing Optimization of a Composite Part,” Structural and Multidisciplinary Optimization, Vol. 40(1), pp. 497-511.
- Taheri-Behrooz, F., Shokrieh, M. and Lessard, L., 2010, Progressive Fatigue Damage Modeling of Cross-Ply Laminates, II: Experimental Evaluation, J. of Composite Materials, Vol. 44(10), pp. 1261-1277.
- Thouin, M., Ghiasi, H., and Lessard, L., 2010, Design of a Carbon Fiber Bicycle Stem Using a Novel Internal Bladder Resin Transfer Molding Technique, Advanced Composite Letters, Vol. 19(1), pp 51-60.
Conference Proceedings
- Visweswaraiah, S., Pasini, D., and Lessard, L., 2010, A Study Of The Effect Of Geometry Changes On The Structural Stiffness Of A Composite D-Spar, ASME Paper Proc. Of The ASME 2010 International Design Engineering Technical Conferences & Computers and Information In Engineering Conference Idetc/Cie 2010 August 15-18, Montreal, Quebec.
MATEESCU, D.
Journal Publications
- Mateescu, D., 2010, Explicit exact and third-order-accurate pressure-deflection solutions for oblique shock and expansion waves, The Open Aerospace Engineering J., Vol. 3, pp.1-8.
- Mateescu, D., 2009, Analysis of flexural oscillations of flexible airfoils in subsonic compressible flows, The Scientific Bulletin of the National Institute for Aerospace Research, Elie Carafoli, No. 2, pp. 51-70.
- Mateescu, D., and Abdo, M, 2010, Analysis of the flow past airfoils at very low Reynolds numbers. Journal of Aerospace Engineering, IMechE J., Vol. 224, pp. 757-775.
- Mateescu, D., Han, Y., Misra, Y.K., 2010, Analysis of the dynamics and vibrations of structures subjected to unsteady aerodynamic loads for crack detection, Key Engineering Materials, Vol. 417-418, pp. 605-608.
- Mateescu, D., Misra, A.K., and Shrivastava, S., 2010, Aeroelastic oscillations of a delta wing with bonded piezoelectric strips in supersonic flow, J. Mathematics in Engineering Science and Aerospace Vol. 1(2), pp. 119-138.
- Mateescu, D., Munoz, M., and Scholz, O., 2010, Analysis of unsteady confined viscous flows with variable inflow velocity and oscillating walls. ASME J. of Fluids Engineering, 2010 , Vol. 132(4), pp. 1-22.
Conference Proceedings
- Mateescu, D., 2009, Aerodynamics of airfoils at low Reynolds numbers, 20th International Congress of Mechanical Engineering COBEM-2009, Gramado, Brazil, November, ISSN Paper 2176-5480, pp. 1-10.
- Mateescu, D.,, 2009, Flexural oscillations of flexible airfoils in subsonic compressible flows. 13th CASI Aerodynamics Symposium AERO-2009, Ottawa, Ontario, May, pp. 1-10.
- Mateescu, D., 2010, Explicit exact and third-order pressure-deflection solutions for oblique shock and expansion waves. Applied Aerodynamics Conference, 48th AIAA Aerospace Sciences Meeting, Orlando, Florida, 4-8 January, AIAA Paper 2010-1048, pp. 1-13.
- Mateescu, D., Han, Y., and Misra, A.K., 2009, Analysis of the dynamics and vibrations of structures subjected to unsteady aerodynamic loads for crack detection, 8th International Conference on Fracture and Damage Mechanics-2009, Malta, September, pp. 1-4.
- Mateescu, D., Han, Y., and Misra, A.K., 2009, Aeroelastic oscillations of aircraft structures with bonded piezoelectric strips. Symposium on Advances in Smart Materials and Adaptive Structures. Proceedings of the 3rd International Conference on Integrity, Reliability and Failure –IRF-2009, Porto, Portugal, 20-24 July, Chapter IV, pp. 143-144.
- Mateescu, D., Misra, A.K., and Han, Y., 2009, Vibrations of damaged structures with bonded piezoelectric strips and subjected to aerodynamic loads. 9th International Conference on Vibration Problems ICOVP-2009, IIT Kharagpur, India, January, Paper T4-09, pp. 1-8.
- Mateescu, D., Munoz, M., and Scholz, A., 2010, Unsteady confined viscous flows with oscillating walls and variable inflow velocity. Applied Aerodynamics Conference, 48th AIAA Aerospace Sciences Meeting, Orlando, Florida, 4-8 January, AIAA Paper 2010-514, pp. 1-15.
MISRA, A.K.
Journal Publications
- Cohen, S.S. and Misra, A.K., 2009, The effect of climber transit on the space elevator dynamics. Acta Astronautica, Vol. 64, pp. 538-553.
- Das, S., Sinha, M., Kumar, K.D. and Misra, A.K., 2010, Reconfigurable magnetic attitude control of Earth-pointing satellites. Proceedings of the I. Mech. E., Part G: Journal of Aerospace Engineering, Vol. 224(12), pp. 1309-1326.
- Mateescu, D., Han, Y. and Misra, A.K., 2010. Analysis of the dynamics and vibrations of structures subjected to unsteady aerodynamic loads for crack detection. Key Engineering Materials, Vol. 417-418, pp. 605-608.
- Mateescu, D., Misra, A.K., and Shrivastava, S., 2010, Aeroelastic oscillations of a delta wing with bonded piezoelectric strips in supersonic flow. Mathematics in Engineering, Science and Aerospace - An International Journal, Vol. 1(2), pp. 119-138.
- Piersigilli, P., Sharf, I., and Misra, A.K. , 2010, Reactionless capture of a satellite by a two-degree-of-freedom manipulator. Acta Astronautica, Vol. 66, pp. 183-192.
- Woo, P. and Misra, A.K., 2010, Dynamics of a partial space elevator with multiple climbers. Acta Astronautica, Vol. 67, pp. 753-763.
Conference Proceedings
- Mateescu, D., Han, Y., and Misra, A.K., 2009, Aeroelastic oscillations of aircraft structures with bonded piezoelectric strips. Symposium on Advances in Smart Materials and Adaptive Structures. Proc. of the 3rd International Conference on Integrity, reliability and Failure - IRF 2009, Porto, Portugal, July, Chapter IV, pp. 143-144.
MONGEAU, L.
Journal Publications
- Chung, K., McKibben, N., and Mongeau, L., 2010, Wind noise in hearing aids with directional and omnidirectional microphones: Polar characteristics of custom-made hearing aids, J. Acoust. Soc. Am., Vol. 127(4), pp. 2529-2542.
- Chung, K., Mongeau, L., and McKibben, N., 2009, Wind noise in hearing aids with directional and omnidirectional microphones: Polar characteristics of behind-the-ear hearing aids, J. Acoust. Soc. Am.,Vol. 125(4), pp. 2243-2259.
- Cook, D.D., Nauman, E., and Mongeau, L.., 2009, Ranking vocal fold model parameters by their influence on modal frequencies, J. Acoust. Soc. Am., Vol. 126(4), pp. 2002-2010.
- Lew, P.T., Lyrintzis, A., and Mongeau, L., 2010, Noise prediction of a subsonic turbulent round jet using the lattice-Boltzmann method, J. Acoust. Soc. Am., Vol. 128(3), pp. 1118-1127.
- Nabavi, M., and Mongeau, L., 2009, Numerical analysis of high frequency pulsating flows through a diffuser-nozzle element in valveless acoustic micropumps, Microfluidics Nanofluidics, ISSN 1613-4982, DOI 10.1007/s10404-009-0427-4.
- Najafiyazdi, A., Brès, G.A., and Mongeau, L., 2010, An Acoustic Analogy Formulation for Moving Sources in Uniformly Moving Media, Proc. Roy. Soc. London A, Vol. 467, pp 144-165, doi:10.1098/rspa.2010.0172, 2010.
- Paek, I.S., Mongeau, L., and Braun, J.E., 2010, Performance characterization of a small-capacity thermoacoustic cooler for air-conditioning applications, J. Mechanical Science and Technology, Vol. 24(9), pp. 1781-1791.
- Paek, I.S., Mongeau, L., Braun, J.E., and Kang, S.Y. 2009, Phase of acoustic impedance and performance of standing wave thermoacoustic coolers, J. Mech. Sci. Tech., 22, pp. 1537-1543.
- Park, J.B., Mejia, P.Y., and Mongeau, L.., 2009, Effects of notches on surface pressure fluctuations downsteam of a leading edge spoiler, SAE Int. J. Passeng. Cars – Mech.Syst., Vol. 2(1), pp. 1563-1573.
- Park, J.B., Mejia, P.Y., and Mongeau, L., 2010, Effects of Notches on the Surface Pressure Field Downstream of a Wall-Mounted Spoiler, Exp. Fluids, Vol. 49(3), pp. 623-635.
Conference Proceedings
- Bakhshaei, H., Mongeau, L.., and Mongrain, R. 2010, Assessment of the Quasi-Steady Assumption in Glottal Airflow, Proc. of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting, Montreal, Canada, August 1-5.
- Chen, L.J., and Mongeau, L., 2009, Contact pressure estimation in a vocal fold model using a Hertzian impact model, Proc. of the 31st Annual International Conference of the IEEE Engineering and Biology Society, Minneapolis, Minnesota, September 2-6.
- Nabavi, M., and Mongeau, L., 2009, Effects of the divergence angle on the onset of asymmetric flow through a planar diffuser,” paper FEDSM2009-78301, Proc. of the 10th International Symposium on Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications, Vail, Colorado, August 2-6.
- Park, J.B., Mejia, P.Y., and Mongeau, L., 2009, Effects of Notches on Surface Pressures Downsteam of a Leading Edge Spoiler, Proc. of the 2009 SAE Noise & Vibration Conference, Paper 2009-01-2238, St-Charles, Illinois, May 19-21.
MONGRAIN, R.
Journal Publications
- Bertrand, O.F., Larose, E., Costerousse, O., Mongrain, R., Rodés-Cabau, J., Déry, .JP., Nguyen, C.M., Barbeau, G., Gleeton, O., Proulx, G., De Larochellière, R., Noël, B., and Roy, L., 2010, Effects of aspiration thrombectomy on necrosis size and ejection fraction after transradial percutaneous coronary intervention in acute ST-elevation myocardial infarction, J. Catheter Cardiovasc Interv. Jun 24.
- Choudhury, N., Bouchot, O., Rouleau, L., Tremblay, D., Cartier, R., Butany J., Mongrain, R., and Leask R., 2009, Local mechanical and structural properties of healthy and diseased human ascending aorta tissue, J. Cardiovasc Pathol, Vol. 18(2), pp. 83-91.
- Chu, B., Mongrain, R., and Tardif, J.-C., 2009, Characterization of aortic tissue fracture toughness and stiffness under cyclic fatigue loading, J. of Biological Physics and Chemistry, Vol. 9(4).
- Mejia, J., Mongrain, R., Bilal, R., Leask, R., and Bertrand, O.F., 2009, Evaluation of the effect of stent strut profile on shear stress distribution, Biomedical Engineering Online 8:8doi:10.1186/1475-925X-8-8.
- Mejia, J., Mongrain, R., Leask, R., and Bertrand, O.F., 2009, Non-Newtonian and transient effects on the wall shear stress within a stented artery, J. of Biological Physics and Chemistry, Vol. 9(4), pp. 17-182.
- Pazos, V., Mongrain, R., and Tardif, J.-C., 2010, Deformable stenotic mock artery with a lipid pool, J. Biomech Eng, Vol. 132(3), 034501, 4 pp.
- Pazos, V., Mongrain, R., and Tardif, J.-C.,2010, Mechanical characterization of atherosclerotic arteries using finite element modeling: Feasibility study on mock arteries, IEEE Trans Biomed Eng, Vol. 57(6), pp. 1520-8.
- Pazos, V., Mongrain, R., and Tardif, J.C.,2009, Polyvynil alcohol cryogel: Optimizing the parameters of cryogenic treatment using hyperelastic models, J Mech Behav Mat, Vol. 2(5), pp. 542-549.
- Rouleau, L., Copland , I.B., Tardif, J.C., Mongrain, R., and Leask, R.L., 2010, Neutrophil adhesion on endothelial cells in a novel asymmetric stenosis model: effect of wall shear stress gradients, J. Ann Biomed Eng, Vol. 38(9): pp. 2791-2804.
- Tremblay, D., Cartier, R., Mongrain, R., and Leask, R.L., 2010, Regional dependency of the vascular smooth muscle cell contribution to the mechanical properties of the pig ascending aortic tissue, J Biomech, 26;43(12), pp. 2448-51.
- Tremblay, D., Zigras, T., Cartier, R., Leduc, L., Butany, J., Mongrain, R., and Leask R., 2009, A comparison of the mechanical properties of materials used in the aortic arch reconstruction, J. Ann Thorac Surg, Vol. 88(5), pp. 1484-1491.
Conference Proceedings
- Abdelali M., Mongrain, R., and Bertrand M., 2009, Elastography based on mechanical and image energy minimization, Proc. of Medical Imaging Ultrasonic and Signal Processing, 7265(22), pp. 1947-1950.
- Amabili M., Karagiozis K., Mongrain, R., Paidoussis M.P., 2010, Cartier R, Nonlinear behaviour of oa of the aorta at critical flow related to dissection, Proc. of the Canadian Cardiovascular Society, abstract 008-0023, Montreal.
- Bakhshaei, H., Mongeau, L., and Mongrain, R., 2010, Assessment of the quasi-steady assumption in glottal air flow, Proc. of the FEDSM 2010 – ICNMM 2010, # 30593, Montreal.
- Bakhshaei, H., Mongeau, L., and Mongrain, R., 2010, Creating a three-dimensional geometry of a human larynx and vocal folds based on computer tomography scan data, Proc. of the Madison Voice Conference, International Conference on Voice Physiology and Biochemistry, International Conference on Advances in Laryngeal Biophysiology, 2010 ICVPB and ICALB, Madison, Wisconsin.
- Bertrand, O.F., Larose, E., Costerousse, O., Mongrain, R., Rodes-Cabau, Dery J., Rinfret S., Nguyen C.M., Barbeau G., Gleeton O., Proulx G., De Larocheliere R., Noel B., and Roy L., Effects of aspiration thrombectomy on necrosis size and ejection fraction after transradial percutaneous coronary intervention in acute ST-elevation myocardial infarction, abstract 527, Proc. of the Canadian Cardiovascular Society, Montreal.
- Karagiozis, K., AMABILI, M., Mongrain, R., and Paidoussis M.,P., 2010, Buckling of human aorta related to dissection due to flow-pressure conditions, Proc. of the FEDSM 2010 – ICNMM 2010, # 30812, Montreal.
- Karagiozis, K., AMABILI, M., Mongrain, R., and Paidoussis, M.P., 2010, Buckling of human aorta related to dissection due to flow-pressure conditions, Proc. of the 7th International Symposium FSI2 & FIV + N, 3rd joint US-European Fluids Engineering ASME Meeting, Montreal.
- Mejia, J., Mongrain, R., and Bertrand, O.F., 2009, Non-Newtonian and transient effects on the wall shear stress within a stented artery, Proc. of the SimBio-M, Simulation for Bio-Mechanics, Materials, Medicine, Molecules, Antibes, Frances.
- Mejia, J., Mongrain, R., Leask, R., and Bertrand, O., Accurate Prediction of Wall Shear Stress in a Stented Artery: Newtonian vs. non-Newtonian Models, Proc.of the FEDSM 2010 – ICNMM 2010, # 31235, Montreal.
- Mejia, J., Mongrain, R., Leask R., Bertrand, O.F., and Cabau-Rodes, J. 2009, Transient and non-Newtonian effects on the wall shear stress distribution of a stented artery, Proc. of the ASME Summery Bio-engineering Conference (SBC 2009), ID 206735.
- Mejia, J., Mongrain, R., Leask R., and Bertrand, O.F., 2010, Experimental validation of the near-wall flow field within a stented artery, Proc. of the ASME SBC, Naples, Florida.
- Molavi-Zarandi, M., Mongrain, R., and Bertrand, O., 2010, Three dimensional hemodynamic and wall shear stress distribution in the stented coronary artery bifurcation, abstract 394-016, Proc. of the Canadian Cardiovascular Society, Montreal. 13. Molavi-Zarandi, M., Mongrain, R., and Bertrand,O.F., 2010, Modeling Drug Eluting Stents for Coronary Artery Bifurcations Considering non-Newtonian Effects, Proc. of the FEDSM 2010 – ICNMM 2010, # 31190, Montreal. 14. Molavi-Zarandi, M., Mongrain, R., and Bertrand, O.F., 2010, Non-Newtonian effects on blood dynamics in stented coronary artery bifurcations, Proc. of the FEDSM 2010 – ICNMM 2010, # 31187, Montreal.
15. Mongrain, R., Chu, B., Leask, R., and Cartier, R., 2009, Characterization of aortic tissue toughness and stiffness under cyclic fatigue loading, Proc. of the SimBio-M, Simulation for Bio-Mechanics, Materials, Medicine, Molecules, Antibes, Frances, p. 23.
16. Mongrain, R., Yue, S., Chu B., Leask, R., and Bertrand, O.F., 2010, The use of metal nanopowders for the manufacturing of stents, Proc. of the Endovascular Biomechanics and Restenosis Symposium, Marseille.
17. Nobari, S., Mongrain, R., Leask R., and Cartier, R., 2010, Development of a 3D FSI model of the aortic root incorporating coronary structure, Proc. of the ASME SBC, Naples, Florida, USA, # 19657.
18. bari,S., Mongrain, R., Leask, R., and Cartier, R., 2010, A 3D model of the aortic valve including coronary structure: impact of the ostia position on coronary flow, Proc. of the FEDSM 2010 – ICNMM 2010, # 30695, Montreal.
19. Nobari, S., Mongrain, R., Leask, R., Cartier R., 2010, 3D FSI model of the aortic valve including the coronary structure – Impact of the ostia position on coronary flow, abstract 400-022, Proc.of the Canadian Cardiovascular Society, Montreal.
- Nobari, S., Mongrain, R., Campbell, I., Leask, R., and Cartier, R., 2009, Derivation of surrogate variables to assess pathological conditions using a 3D model of the aortic valve, Proc. of the ASME Summery Bio-engineering Conference (SBC 2009), ID 205787.
- Nobari, S., Mongrain, R., Campbell, I., Leask, R., and Cartier, R., 2009, Assessment of pathological conditions using a 3D model of the aortic valve, Proc. of the IGSRS 6th Interdisciplinary Graduate Student Research Symposium, p. 29.
- Pazos, V., Mongrain, R., and Tardif, J.C., 2009, Simulation based characterization of stenotic vessels, Proc. of the SimBio-M, Simulation for Bio-Mechanics, Materials, Medicine, Molecules, Antibes, Frances, p. 62.
- Rouleau, L., Farcas, M., Copland ,I.B., Tardif, J.-C., Mongrain, R., and Leask, R., 2009, Morphological and functional flow-induced response of endothelial cells and adhesive properties of leukocytes in 3D stenotic models, Proc. of the ECIFMBE, 22: 2015-2018.
- Rouleau. L., Rossi. J., Farcas. M., Tardif. J.-C., Mongrain, R., and Leask. R., 2009, Adhesive properties and inflammatory response of endothelial response of endothelial cells to wall shear stress in three dimensionan stenotic models, Proc. of the ESC European Society of Cardiology, Barcelona, ID P2218.
- Rouleau. L., Rossi. J., Tardif. J.-C., Mongrain, R., and Leask. R., 2009, Inflammatory response of endothelial cells to wall shear stress in three dimensional stenotic models, Proc. of the Canadian Biomaterials Society Annual Meeting, Quebec, Qc.
- Rouleau. L., Rossi. J., Tardif. J.-C., Mongrain, R., and Leask.R., 2009, Inflammatory response of endothelial cells to wall shear stress in three dimensional stenotic models, Proc. of the ASME Summery Bio-engineering Conference (SBC 2009), ID 206661.
MYDLARSKI, L.
Journal Publications
- Lepore, J. and Mydlarski, L., 2009, Effect of the scalar injection mechanism on passive scalar structure functions in a turbulent flow, Physical Review Letters, 103, 034501, 4 pp.
Conference Proceedings
- Berajeklian, A. and Mydlarski L., 2010. Simultaneous velocity-temperature measurements in the heated wake of a cylinder with application to the modeling of turbulent passive scalars, Bulletin of the American Physical Society, Vol. 55(16), p. 68.
- Germaine, E., Cortelezzi, L. and Mydlarski L., 2010, Experiments and simulations of passive scalars released from concentrated sources in turbulent channel flow, Bulletin of the American Physical Society, Vol. 55(16), p. 69.
- Khorsandi, B., Gaskin, S.J., and Mydlarski, L., 2010, Flying-hot-film anemometry measurements of the effect of background turbulence on a turbulent jet, Proc. of the Sixth International Symposium on Environmental Hydraulics, International Association of Hydraulic Engineering and Research, 6 pp.
- Khorsandi, B., Mydlarski, L., and Gaskin, S.J., 2009, A laboratory study of noise in turbulence measurements using acoustic Doppler velocimetry, Proc. of the 33rd International Association of Hydraulic Engineering and Research (IAHR) Congress: Water Engineering for a Sustainable Environment, 7pp.
- Lepore, J. and Mydlarski L., 2009, Effect of scalar-field initial conditions on the internal intermittency of turbulent passive scalars. Bulletin of the American Physical Society, Vol.54(19), pp. 61-62.
- Lepore, J. and Mydlarski L., 2010, Dependence of different measures of passive scalar internal intermittency on the scalar injection mechanism, Proc. of the 16th U.S. National Congress on Theoretical and Applied Mechanics (USNCTAM), 2pp.
- Lepore, J. and Mydlarski L., 2010, Effect of scalar-field boundary conditions on the Markovian properties of passive scalar increments, Bulletin of the American Physical Society, Vol. 55(16), p. 394.
- Voth, G., Blum, D., Bodenschatz, E., Gilbert, M., Xu, H., Mydlarski, L., Gylfason, A., and Yeung, P.K., 2010, Signatures of non-universal large scales in conditional structure functions from eight different turbulent flows, Bulletin of the American Physical Society, Vol. 55(16), p. 160.
NADARAJAH, S.
Journal Publications
- Cagnone, J.S. and Nadarajah, S., 2009, An Implicit Non-Linear Frequency Domain-Spectral Difference Scheme for Periodic Euler Flow, AIAA J. Vol .47(2).
- Mohamed, K., Nadarajah, S., and Paraschivoiu, M., 2009, Simulation of a Wing Tip Vortex at Static and Dynamic Stall Conditions with a DES Method, AIAA J. of Aircraft, Vol. 46(4).
- Nadarajah, S. and Tatossian, C., 2010, Multi-Objective Aerodynamic Shape Optimization for Unsteady Viscous Flows, J. of Optimization and Engineering, Vol. 11(1).
- Nakakita, K., Nadarajah, S., and Habashi W., 2010, Toward Real-Time Aero-Icing Simulation using Reduced Order Models on Complete Aircraft Configurations in Viscous Flow, AIAA J. of Aircraft, Vol. 47(1).
NAHON, M.
Journal Publications
- Coulombe-Pontbriand, P. and Nahon, M., 2009, Modeling and Experimental Characterization of a Tethered Spherical Aerostat in an Outdoor Environment, J. of Wind Engineering and Industrial Aerodynamics, Vol. 97(5-6), pp. 208-218.
- Georgiades, C., Nahon, M., and Buehler, M., 2009, Simulation of an Underwater Hexapod Robot, Ocean Engineering, Vol. 36(1), pp. 39-47.
- Meunier, G., Boulet, B., and Nahon, M., 2009, Control of an Overactuated Cable-Driven Parallel Manipulator, IEEE Transactions on Control Systems Technology, Vol. 17(5), pp.
1043-1054. 4. Li, Y., Nahon, M., and Sharf, I., 2009, Dynamics Modeling and Simulation of Flexible Airships, AIAA Journal, Vol. 47(3), pp. 592-605.
- Plamondon, N. and Nahon, M.., 2009, Trajectory Tracking Controller for an Underwater Hexapod Vehicle, J. Bioinspiration & Biomimetics, Vol. 4(3), 14 pp.
PAÏDOUSSIS, M.P.
Journal Publications
- AMABILI, M., Karagiozis, K., and Païdoussis, M.P., 2009, Effect of geometric imperfections on nonlinear stability of circular cylindrical shells conveying fluid, International J. of Non-Linear Mechanics, Vol. 44, pp. 276-289.
- Del Prado, Z., Gonçalves, P.B., and Païdoussis, M.P., 2009, Nonlinear vibrations and imperfection sensitivity of a cylindrical shell containing axial fluid flow, J. of Sound and Vibration, Vol. 327, pp. 211-230.
- Del Prado, Z., Goncalves, P.B., and Païdoussis, M.P., 2010, Non-linear vibrations and instabilities of orthotropic cylindrical shells with internal flowing fluid, International J. of Mechanical Sciences, Vol. 52, pp. 1437-1457.
- Ghayesh, M.H., and Païdoussis, M.P., 2010, Three-dimensional dynamics of a cantilevered pipe conveying fluid, additionally supported by an intermediate spring array, International J. of Non-Linear Mechanics, Vol. 45, pp.507-524.
- Guo, C.Q., Zhang, C.H., and Païdoussis, M.P., 2010, Modification of equation of motion of fluid-conveying pipe for laminar and turbulent flow profiles, J. of Fluids and Structures, Vol. 26, pp. 793-803.
- Gosselin, F., and Païdoussis, M.P., 2009, Blocking in the rotating axial flow in a corotating flexible shell, J. of Applied Mechanics, Vol. 76(11001) pp. 1-6. 7. Modarres-Sadeghi, Y., and Païdoussis, M.P., 2009, Nonlinear dynamics of extensible fluid-conveying pipes, supported at both ends, J. of Fluids and Structures, Vol. 25, pp. 535-543.
- Païdoussis, M.P., and Tétreault-Friend, M., 2009, Aspirating cantilevers and reverse sprinklers, American J. of Physics, Vol. 77, pp. 77, 349-353.
- Prabhakar, S., Païdoussis, M.P., and Vengallatore, S., 2009, Analysis of frequency shifts due to thermoelastic coupling in flexuralmode micromechanical and nanomechanical resonators, J. of Sound and Vibration, Vol. 323, pp. 385-396.
- Rinaldi, S., and Païdoussis, M.P., 2010, Dynamics of a cantilevered pipe discharging fluid, fitted with a stabilizing end-piece, J. Fluids and Structures, Vol. 26, pp. 517-525.
- Rinaldi, S, Prabhakar, S.,Vengallatore, S., and Païdoussis, M.P., 2010, Dynamics of microscale pipes containing internal flow: damping, frequency shift, and stability, J. of Sound and Vibration, Vol. 329, pp. 1081-1088.
Conference Proceedings
- AMABILI, M., Karagiozis, K., and Païdoussis, M.P., 2009, Nonlinear vibrations of circular cylindrical shells conveying flowing fluid, Proc. 16th Int'l Congress on Sound and Vibration, Krakow, Poland, 5-9 July.
- AMABILI, M., Karagiozis, K., and Païdoussis, M.P., 2009, Nonlinear vibrations and stability of shells conveying water flow, Proc. ASME Design Engineering Technical Conferences & Computers and Information in Engineering Conference, San Diego, CA, USA, 30 Aug–2 Sep.
- AMABILI, M., Karagiozis, K., and Païdoussis, M.P., 2009, Chaotic vibrations of circular shells conveying flowing fluid, Proc. ASME Int'l Mechanical Engineering Congress & Exposition, Lake Buena Vista, FL, USA, 13-19 Nov.
- AMABILI, M., Karagiozis, K., and Païdoussis, M.P., 2010, Hyperchaotic behaviour of shells subjected to flow and external force, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-30814.
- Del Prado, Z., Goncalves., P.B., and Païdoussis, M.P., 2010, Influence of geometry on the non-linear vibrations of cylindrical shells with internal flowing fluid, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-30034.
- Giacobbi, D., Rinaldi, S., Païdoussis, M.P., and Semler, C., 2010, The dynamics of a cantilevered pipe aspirating fluid studied by experimental, numerical and analytical methods", Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM201 0-30833.
- Giacobbi, D., Païdoussis, M.P., and Semier, C., 2010, An analytical study of the dynamics of pipes conveying fluid of spatially varying density, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-31053.
- Hajghayesh, M. and Païdoussis, M.P., 2010, Dynamics of a fluid-conveying cantilevered pipe with intermediate spring support", Proc. 7th Int'I Symposium on Fluid-Structure Interactions, Flow-Sound Interactions, and Flow-Induced Vibration & Noise (7th FSlfl2 & FIV+N Symposium), ASME 2010 3rd Joint US-European Fluid Engineering Summer Meeting, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICI\IMM2010-30084.
- Hajghayesh, M., AMABILI, M., and Païdoussis, M.P., 2010, Phase-shift determination in Coriolis flow meters with added masses, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-30085.
- Karagiozis,K., AMABILI, M., Mongrain, R., and Païdoussis, M.P., 2010, Buckling of human aorta related to dissection due to flow-pressure conditions, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-30812.
- Kheiri, M., Païdoussis, M.P., and AMABILI, M., 2010, On the feasibility of using linear fluid dynamics in an overall nonlinear model for the dynbamics of cantilevered cylinders in axial flow, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-30082.
- Zhao, W., Liu, M., Jiang., J, and Païdoussis, M.P., 2010, The dynamics of cantilevered flexible plates in axial flow, Proc. 7th FSlfl2 & FIV+N Symposium, Montreal, OC, Canada, 1-5 August, Paper FEDSM-ICNMM2010-30079.
PASINI, D.
Journal Publications
- Amany, A. and Pasini, D., 2009, Material and shape selection for stiff beams under non-uniform flexure, J.of Materials and Design, Vol. 30, pp. 1110-1117.
- Caro, S., Khan, W.A., Pasini, D., and ANGELES, J., 2010, The Rule-based Conceptual Design of the Architecture of Serial Schoenflies-motion Generators, J.of Mechanism and Machine Theory, Vol. 45(2), pp. 251-260.
- Desrochers S., Pasini, D., and Angeles J., 2010, Optimum Design of a Compliant Uniaxial Accelerometer, J. of Mechanical Design, Vol. 132 (4), pp. 041011-8.
- Elsayed, M. and Pasini, D., 2009, Mechanics of 2D Pin Jointed Lattice Structures, AES Technical Reviews, Part B: International J. of Advances in Mechanics and Applications of Industrial Materials, Vol. 1(1), pp. 83 – 91.
- Elsayed M. and Pasini, D., 2010, Analysis of the Elastostatic Specific Stiffness of 2D Stretching-Dominated Lattice Materials, Journal of Mechanics of Materials, Vol. 42(7), pp. 709-725.
- Elsayed M. and Pasini, D., 2010, Multiscale Structural Design of Columns made of Regular Octet-Truss Lattice Material, International Journal of Solids and Structures, Vol. 47(14-15), pp. 1764-1774.
- Faisal, T.R., Khalil Abad, E.M., and Pasini, D., 2010, The impact of plant tissue, turgor pressure and structural morphology on the mechanical properties of a leaf petiole, International Journal of Bionic Engineering, Vol.7, pp. 11-23.
- Ghiasi H., Kazem Fayazbakhsh, Pasini, D., and Lessard L, 2010, Optimum stacking sequence design of composite materials. Part II: Variable stiffness design, J. of Composite Structures, Vol. 93(1), pp. 1-13.
- Ghiasi, H., Pasini, D., and, Lessard L., 2009, Review paper Optimum Stacking Sequence Design of Composite Materials Part I: Constant Stiffness Design, Journal of Composite Structures, Vol. 90(1), pp. 1-1.
- Ghiasi, H., Pasini, D., and Lessard, L, 2010, Non–dominated Sorting Hybrid Algorithm for Multiobjective Optimization of Engineering problems, J. of Engineering Optimization, Vol. 43(1) pp. 39-59.
- Ghiasi, H., Pasini, D., and, Lessard, L, 2010, Pareto Frontier for Simultaneous Structural and Manufacturing Optimization of a Composite Part, J. of Structural and Multidisciplinary Optimization, Vol. 40(1), pp. 497-511.
- Ghiasi, H., Pasini, D., Lessard, L, and M. Thouin, 2010, Optimum Structural and Manufacturing Design of a Braided Hollow Composite Part, J Applied Comp Mat, Vol. 17(2), pp. 159–173.
- Neurohr, T., and Pasini, D., 2009, Principles of Lightweight Structures in the Sculptural Conceptions of Naum Gabo, Interdisciplinary Science Reviews, Vol. 34 (4).
- Pasini, D., 2009, Bend stiffness of multilaminate microstructures containing three dissimilar materials, International J. of Mechanics and Materials in Design, Vol. 5 (2).
Conference Proceedings
- Radziszewski, P., Martins, S., Faragalli, M., Kaveh-Moghaddam, N., Oyama, D., Briend, R., Gharib, N., Prahacs, C., Ouellette, S., Pasini, D., Thomson, V., Lowther, D., Farhat, M., and Jones, B., 2010, iRings – Development of a Wheel Prototype Concept for Lunar Mobility, Proc. of 15th CASI-Astro conference, May 4–May 6, Toronto, Canada.
RADZISZEWSKI, P.
Journal Publications
- Hewitt, D., Allard, S., Radziszewski, P., 2009, Pipe lining abrasion testing for paste backfill operations, J. of Minerals Engineering, Vol.22(12), pp. 1088-1090.
- St-Pierre, L., Hassani, F.P., Radziszewski, P., and Ouellet, J., 2009, Development of a dynamic model for a cone bolt, International J. of Rock Mechanics and Mining Sciences, Volume 46(1) pp.107-114.
- Radziszewski, P. 2009, The steel wheel abrasion test (SWAT): A tool to study wear, friction and ore breakage in the mining industry, J. of Wear, Vol.267(1-4), pp. 92-98.
Conference Proceedings
- Chenje, T., Radziszewski, P., Hewitt, D., 2009, Steel Media Wear: Experimentation, Simulation and Validation, Proc. 2006, 41st Meeting of the Canadian Mineral Processors, pp.557-572, ISBN: 1-894475-86-0.
- Radziszewski, P., Martins, S., Faragalli, M., Kaveh-Moghaddam, N., Oyama, D., Briend, R., Gharib, N., Prahacs, C., Ouellette, S., Pasini, D., Thomson, V., Lowther, D., Farhat, M., and Jones, B., 2010, iRings – Development of a Wheel Prototype Concept for Lunar Mobility, Proc. of 15th CASI-Astro conference, May 4–May 6, Toronto, Canada.
SHARF, I.
Journal Publications
- Li, Y., Nahon, M., and Sharf, I., 2009, 'Dynamics Modeling and Simulation of Flexible Airships, ' AIAA J., Vol. 47(3), pp. 592-605.
- Piersigilli, P., Sharf, I., and Misra, A.K., 2010, Reactionless Capture of a Satellite by a Two Degree-of-freedom Manipulator, Acta Astronautica, Vol. 66, pp. 183-192.
- Sharf, I., Rubin, M.B., and Wolf, A. 2010, Arithmetic and Geometric Solutions for Average Rigid-body Rotation, J. of Mechanism and Machine Theory, Vol. 45(9), pp. 1239-1251.
- Smith, J.A., Poulakakis, I., Trentini, M., and Sharf, I., 2010, Bounding with Active Wheels and Liftoff Angle Velocity Adjustment, International J.of Robotics Research, Vol. 29(4), pp. 414-427.
- Verscheure, D., Sharf, I., Bruyninckx, H., Swevers, J., and De Schutter, J., 2009, Identification of Contact Dynamics Parameters for Stiff Robotic Payloads, IEEE Transactions on Robotics, Vol. 25(2) pp. 240-252.
- Verscheure, D., Sharf, I., Bruyninckx, H., Swevers, J., and De Schutter, J., 2010, Identification of Contact Dynamics Parameters from Stiff Multi-point Contact Robotic Operations, International J. of Robotics Research, Vol. 29(4) pp. 367-385.
- Zhang, Y. and Sharf, I., 2009, Validation of Nonlinear Viscoelastic Contact Force Models for Low Speed Impact, ASME J,of Applied Mechanics, Vol. 76(5), p. 051002 (12 pp.).
Conference Proceedings
- Sharf, I., 2010, Dynamic Locomotion with a Wheeled-Legged Quadruped Robot, in ANGELES, J., Boulet, B., Clark, J.J., Kövecses, J., and Siddiqi, K. (Eds.), Brain, Body and Machine, pp. 299-309, Springer-Verlag, Berlin-Heidelberg.
- Nguyen Huynh, T.C. and Sharf, I. 2010, Capture of Spinning Target with Space Manipulator Using Magneto-rheological Damper, Proc. AIAA Guidance Navigation and Control, pp. 1-12, Toronto, Canada, August.
- Wolf, A., Sharf, I., and Rubin, M.B., 2010, Using Cosserat Point Theory for Estimating Kinematics and Soft-Tissue Deformation During Gait Analysis,' Proc. 12th International Symposium on Advances in Robot Kinematics, ARK 2010, Part 1, pp. 63-70, Slovenia, June 27-July 1.
- Zarrouk, D., Sharf, I., and Shoham, M., 2010. Analysis of Earthworm-like Robotic Locomotion on Compliant Surfaces, Proc. IEEE International Conference on Robotics and Automation, ICRA2010, pp. 1574-1579, Anchorage, Alaska, May.
- Zarrouk, D., Sharf, I., and Shoham, M., 2010, Worm-like Robotic Locomotion in Flexible Environment, Proc. 12th International Symposium on Advances in Robot Kinematics, ARK 2010, Part 2, pp. 81-89, Slovenia, June 27-July 1.
THOMSON, V.
Journal Publications
- Antaki, M., Schiffauerova, A., and Thomson, V., 2010, The Performance of Technical Information Transfer in New Product Development, Concurrent Engineering, Vol. 18, pp. 291-301.
- Attia, M.H., Tavakoli, S., Vargas, R. and Thomson, V., 2010, Laser-Assisted High Speed Finish of Superalloy Inconel 718 under Dry Conditions, CIRP Annals- Manufacturing Technology, Vol. 59, pp. 83–88.
- Bhatt, A., Attia, H., Vargas, R., and Thomson, V., 2010, Wear Mechanisms of Multi-Coated WC Tools in Finish Turning of Inconel 718, J. of Tribology International, Vol. 43, pp. 1113-1121.
- Bhuiyan, N. and Thomson, V., 2010. A Framework for NPD Processes under Uncertainty, J. of Engineering Management, Vol. 22 (2), pp.101-109.
- Kong, L., Bhuiyan, N., and Thomson, V., 2009, The Value of Organizational Structures, Concurrent Engineering, Vol. 17(1) pp. 61-72.
- Srinivasaraghavan, M., Shi, Z., Attia, M.H., and Thomson, V., 2010, Numerical Simulation of Force Distributions in the Grinding Contact Zone, Int. J. of Abrasive Technology, Vol.3(1), pp.63-76.
Conference Proceedings
- Beauregard, Y., Bhuiyan, N., Thomson, V. 2009, Post-certification engineering taxonomy and decision making optimization in the aerospace industry, Proc. of the 2009 Industrial Engineering Research Conference, Miami.
- Radziszewski, P., Martins, S., Faragalli, M., Kaveh-Moghaddam, N., Oyama, D., Briend, R., Gharib, N., Prahacs, C., Ouellette, S., Pasini, D., Thomson, V., Lowther, D., Farhat, M., and Jones, B., 2010, iRings – Development of a Wheel Prototype Concept for Lunar Mobility, Proc. of 15th CASI-Astro conference, May 4–May 6, Toronto, Canada.
- Tavakoli, S., Vargas, R., Attia, H., Thomson, V. 2009. Laser assisted finished turning of inconel 718: process optimization. Proc. of the ASME International Manufacturing Science and Engineering Conference, West Lafayette, IN.
TIMOFEEV, E.
Journal Publications
- Merlen, A., Zhang, Q., Voinovich, P., and Timofeev, E., 2009, Duality of the supercritical solutions in magnetoacoustic wave phase conjugation, Wave Motion, Vol. 46, pp. 255-268.
Conference Proceedings
- Hakkaki-Fard, A. and Timofeev, E., 2009, High resolution determination of sonic and detachment angles at shock wave reflection from a circular cylinder, Proc. of the 17th Annual Conference of CFD Society of Canada, Ottawa, May 3-5, 6pp.
- Hakkaki-Fard, A., Su, Y.Y. and Timofeev, E., 2009, Numerical modeling of shock wave front structure using the Navier-Stokes equations and adaptive unstructured grids, Proc. of the 17th Annual Conference of CFD Society of Canada, Ottawa, May 3-5, 7pp.
- Hakkaki-Fard, A., and Timofeev, E. 2010, The effect of finite shock front thickness on the transition from regular to Mach reflection on a circular cylinder, Proc. of the 18th Annual Conference of CFD Society of Canada, London, Ontario, May 17-19, 8p.
- Norouzi, F., and Timofeev, E. 2010, A hybrid explicit-implicit second order TVD scheme: linear advection equation case, Proc. of the 18th Annual Conference of CFD Society of Canada, London, Ontario, May 17-19, 6p.
- Timofeev, E., Hakkaki-Fard, A., and Su, Y.Y., 2009, Shock wave reflection from a circular cylinder, in: Shock Waves, Proc. of the 27th International Symposium on Shock Waves, St. Petersburg, Russia, July 19-24, p. 321.
- Zarei, Z., Frost, D.L., and Timofeev, E., 2009, Particle entrainment in supersonic flow, in: Shock Waves, Proc. of the 27th International Symposium on Shock Waves, St. Petersburg, Russia, July 19-24, p. 168.
VENGALLATORE, S.
Journal Publications
- Harvey, E. Henderson, J.E., and Vengallatore, S., (2010), Nanotechnology and bone healing, J. of Orthopedic Trauma, Vol. 24, pp. S25-S30.
- Hubert, P., Ashrafi, B., Adhikari, K., Meredith, J., Vengallatore, S., Guan, J., and Simard, B., 2009, Synthesis and characterization of carbon nanotube-reinforced epoxy: correlation between viscosity and elastic modulus, Composites Science and Technology, Vol. 69, pp.2274-2280.
- Ibasco, S., Tamimi, F., Meszaros, R., Le Nihouannen, D., S. Vengallatore, Harvey, E., and Barralet, J.E., 2009, Magnesium-sputtered titanium for the formation of bioactive coatings, Acta Biomaterialia, Vol. 5, pp. 2338-2347. 4. Kuhn, M., Napporn, T., Meunier, M., Vengallatore, S., and Therriault, D., 2009, Miniaturization limits for single-chamber micro solid-oxide fuel cells with coplanar electrodes, J. of Power Sources, Vol. 194, pp. 941-949.
- Prabhakar, S., Paidoussis, M.P., and Vengallatore, S., 2009, ,“Analysis of frequency shifts due to thermoelastic coupling in flexural-mode micromechanical and nanomechanical resonators, J. of Sound and Vibration, Vol. 323, pp.385-396.
- Prabhakar, S. and Vengallatore, S., 2009, Thermoelastic damping in hollow and slotted microresonators, IEEE/ASME Journal of Microelectromechanical Systems, Vol. 18, pp. 725-735.
- Rinaldi, s., Prabhakar, S., Vengallatore, S., and Paidoussis, M.P., 2010, Dynamics of microscale pipes containing internal fluid flow: damping, frequency shift and stability, J. of Sound and Vibration, Vol. 329, pp.1081-1088.
Conference Proceedings
- Das, K., Park, C., Le Faive, R., Hubert, P., and Vengallatore, S., 2010, Synthesis and characterization of nanocomposite thin films for MEMS applications, Materials Research Society Symposium Proc., Vol. 1222, pp. 99-104.
- Dompierre, A., Vengallatore, S., and Frechette, L., 2010, Compact model formulation an design guidelines for piezoelectric vibration energy harvesting with geometric and material considerations, Proc. of the 10th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Leuven, Belgium, 30 Nov – 3 Dec, 4 pp.
- Sosale, G., Prabhakar, S., Frechette, L., and Vengallatore, S., 2010, Effect of thin aluminum coatings on structural damping of silicon microresonators, Materials Research Society Symposium Proceedings, Vol. 1222, pp. 83-88.
- Prabhakar, S., Nabki, F., El-Gamal, M., and Vengallatore, S., 2009, Measurement and analysis of structural damping in silicon carbide microresonators, Materials Research Society Symposium Proceedings, Vol. 1139, pp. 47-52.
ZSOMBOR-MURRAY, P.J.
Journal Publications
- Gfrerrer, A. and Zsombor-Murray, P.J., 2009, Quadrics of Revolution on Given Points, J. for Geometry and Graphics, Vol.13(2), pp.131-144.
- Gfrerrer, A. and Zsombor-Murray, P.J., 2010, Quadrics of revolution on given points, J. for Geometry and Graphics., Vol.13(2), pp.1-14.
- Zsombor-Murray, P.J. and Gfrerrer, A., 2010, A unified approach to direct kinematics of some reduced motion parallel manipulators, ASME J. Mechanisms & Robotics, Vol.2(2), 13pp.
- Zsombor-Murray, P.J. and Gfrerrer, A., (2010) Mapping similarity between parallel and serial architecture kinematics, Meccanica, Vol. 46, pp.187-194.
Conference Proceedings
- Zsombor-Murray, P.J., 2010, Constructive and algebraic geometry in kinematics, Proc. International Conference Geometry & Graphics, Kyoto, Japan, 10-08-(06-09).
- Zsombor-Murray, P.J. and Gfrerrer, A., 2009, Geometric Approach to 3R Wrist Positioning, Computational Kinematics 2009, Kecskeméthy A. (ed.) , Duisburg, 09-05, (ISBN 978-3-642-01946-3, Springer, Berlin) pp.175-182.