Quick Links

Publications 2003


Ahmed | Angeles | Attia | Baliga | Cortelezzi | Frost | Habashi | Higgins | Hubert | Kovecses | Lee J.H.S. | Lee T. | Lessard | Mateescu | Misra | Mongrain | Mydlarski | Nadarajah | Nahon | Nemes | Ostoja-Starzewski | Paidoussis | Pasini | Price | Radziszewski | Sharf | Thomson | Timofeev | Vengallatore | Zsombor-Murray |


AHMED, A.M.

Chapters in Books

Ahmed, A.M., Morrey, B.F., “Polymethlymethacrylate”, Joint Reconstructive Surgery, 3rd Edition, Morrey B.F., Ed, Churchill Livingstone Inc., Philadelphia, Pa., pp. 7-18, 2003.

Nuno, N., Ahmed, A.M., “Geometry of the Femoral Condyles Pertinent to the Formulation of Numerical Models of the Knee Joint”, International Congress on Computational Bioengineering, Proceedings. Doblavé, M., Cerrolaza, M., Rodrigues, H., Eds., Instituto de Investigacion en Ingenieria de Aragon, Zaragoza, Spain, pp.359-367, 2003.

Journal Publications

Nuno, N., Ahmed, A.M., “Three-Dimensional Morphometry of the Femoral Condyles”, Clinical Biomechanics, Vol.18, pp.924-932, 2003.


ANGELES, J.

Chapters in Books

Angeles, J., López-Cajún, C. S. and Cervantes-Sánchez, J. J., 2003, “Geometry of planar cam Profiles”, in Rothbart, H. A. (editor), Cam Design Handbook, McGraw Hill Publishing Co., New York, pp. 175-215.

Al-Widyan, K., Angeles, J. and Cervantes-Sánchez, J.J., 2003, “A model-based framework for robust design”, in Gogu, G. et al. (editors), Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, Dordrecht, pp. 431-442.

Caro, S., Chablat, D., Wenger, P. and Angeles, J., 2003, “The isoconditioning loci of planar three-dof parallel manipulators”, in Gogu, G. et al. (editors), Integrated Design and Manufacturing in Mechanical Engineering, Kluwer Academic Publishers, B. V., Dordrecht, pp.129-138.

Journal Publications

Igliolini, G. and Angeles, J., 2003, “The synthesis of elliptical gears generated by shaper-cutters”, ASME Journal of Mechanical Design, Vol. 125, pp. 793-801.

Asokan, T., Seet, G. and Angeles, J., 2003, “The optimum dimensioning of an underwater manipulator for weld inspection”, Proc. IMechE Journal of Engineering for the Maritime Environment, Vol. 217, pp. 177—184.

Angeles, J., Yang, G. and Chen, I-M., 2003, “Singularity analysis of three-legged, six-dof platform manipulators with RRRS legs”, IEEE/ASME Transactions on Mechatronics, Vol. 8, No. 4, pp. 469--475.

Al-Widyan, K., Angeles, J. and Ostrovskaya, S., 2003, “A robust simulation algorithm for conservative linear mechanical Systems”, International Journal for Multiscale Computational Engineering, Vol. 1, pp. 289--309.

Angeles, J., 2003, “The design of a three-axis positioning manipulator for a given reach”, Ingeniería Mecánica, Vol. 1, No. 2, pp. 35--41.

Chablat, D. and Angeles, J., 2003, “The computation of all 4R serial spherical wrists with an isotropic architecture:, ASME J. of Mechanical Design, Vol. 125, No. 2, pp. 275--280.

Sinatra, R. and Angeles, J., 2003, “A novel approach to the teaching of planar mechanism dynamics. A case study’, The International Journal of Mechanical Engineering Education, Vol. 31, No. 3, pp. 201--214.

Yao, J. and Angeles, J., 2003, “On the role of computational kinematics in TMM”, Journal of Sichuan University (Engineering Science Edition), Vol. 35, No. 3, pp. 1--8.

González-Palacios, M. and Angeles, J., 2003, “The design of a novel pure-rolling transmission to convert rotational into translational motion'', J. of Mechanical Design, Vol. 125, pp. 205--207.

Refereed Conference Proceedings

Salerno, A. and Angeles, J., 2003, “On the nonlinear controllability of a quasiholonomic mobile robot”, Proc. 2003 IEEE International Conference on Robotics & Automation, Taipei, Taiwan, Sept. 14--19, pp. 3379--3384.

Parsa, K., Angeles, J., and Misra, A. K., 2003, “Estimation of the flexural states of a macro-micro manipulator using acceleration data”, Proc. 2003 IEEE International Conference on Robotics & Automation, Taipei, Taiwan, Sept. 14--19, pp. 3120--3125.

Chen, I.-M., Angeles, J., Theingi, and Li, C. , 2003, “The management of parallel-manipulator singularities using joint-coupling”, Proc. 2003 IEEE International Conference on Robotics & Automation, Taipei, Taiwan, Sept. 14--19, pp. 773--778.

Al-Widyan, K. and Angeles, J., 2003, “A robust solution to the spherical rigid-body guidance Problem”, Proc. ASME 2003 Design Engineering Technical Conferences, Chicago, Illinois, USA, Sept. 2--6, DETC2002/DAC-48811.

Salerno, A. and Angeles, J., “The robust design of a two-wheeled quasiholonomic mobile Robot”, Proc. ASME 2003 Design Engineering Technical Conferences, Chicago, Illinois, USA, Sept.2--6, DETC2002/DAC-48845.

Angeles, J., 2003, “A methodology for the optimum dimensioning of robotic Manipulators”, Memoria del 5o. Congreso Mexicano de Robótica, UASLP, San Luis Potosí, SLP, México, Aug. 14--15, pp. 190--203.

Angeles, J., 2003, “An innovative drive for wheeled mobile Robots”, Proc. 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), Port Island, Kobe, Japan, July 20--24, pp. 155--162.

Al-Widyan, K., Monsarrat, B. and Angeles, J., 2003, “The robust analysis and design of parallel spherical manipulators”, Proc. Dresden Symposium Geometry (DSG-CK 2003), Dresden, Germany, Feb. 27--Mar. 1, pp. 23--32.


ATTIA, M. H.,

Journal Publications

Fraser, S., Attia, M.H., and Osman, M.O.M., “Control-Oriented Modeling of Thermal Deformation of Machine Tools Based on Inverse Solution of Time-Variant Thermal Loads with Delayed Response,” accepted for publication in the Trans. ASME, J. of Manufacturing Science and Engineering, October, 2003 (Awarded the ASME Best Paper Award, Manufacturing Engineering Division, ASME-IMECE, 2003).

Attia, M.H., “Prediction of Fretting Fatigue Behaviour of Metals Using a Fracture Mechanics Approach, With Special Consideration to the Contact Problem,” accepted for publication in the Trans ASME, J. Tribology, April, 2003.

Gessesse, Y., Attia, M.H., and Osman, M.O.M., “On the Mechanics of Crack Initiation and Propagation in Elasto-plastic Materials in Impact Fretting Wear,” accepted for publication in the Trans. ASME, J. Tribology, April, 2003.

Refereed Conference Proceedings

Attia, M.H., “Fretting Wear and Fatigue Problems in the Nuclear Industry,” Conférence Institut Européen de Tribologie, Tribologie: Recherche Fondamentale et Finalisee au Service de l'Iindustrie, Ecole Centrale de Lyon, France, April 2003.

Attia, M.H., “Intelligent Machine Tool Systems- Computational Aspect of the Control of the Thermal Deformation Problem,” Invited Keynote paper, presented and published in the Proceedings of the IEEE 7th International Conference on Intelligent Engineering Systems, Assiut, Egypt, 2003.


BALIGA, B.R.

Refereed Conference Proceedings

Sinton, D.A. and Baliga, B.R., Computational modelling of continuous casting, Proc. 2003 ASME International Mechanical Engineering Congress & Exposition (IMECE’03), Paper No. IMECE2003-43967, pp. 1-13, Washington, D.C., November 16-21, 2003.

Atabaki, N. and Baliga, B.R., Steady-state operation of a loop heat pipe: Network thermofluid model and results, Proc. 2003 ASME International Mechanical Engineering Congress & Exposition (IMECE’03), Paper No. IMECE2003-43968, pp. 1-13, Washington, D.C., November 16-21, 2003.

Candanedo, J.A., Aboumansour, E., and Baliga, B.R., Time-mean wall static pressure distributions and module friction factors for fully developed flows in a rectangular duct with spatially periodic interrupted-plate inserts, Proc. 2003 ASME International Mechanical Engineering Congress & Exposition (IMECE’03), Paper No. IMECE2003-43969, pp. 1-10, Washington, D.C., November 16-21, 2003.


CORTELEZZI, L.

Journal Publications

Cortelezzi, L., "The infancy of fluid flow control using point vortex models" SIAM Conference on Applications of Dynamical Systems, Snowbird, UT, May 27-31, 2003

Cortelezzi, L., "Manipulation and control of transverse jets" 2003 SIAM Annual Meeting, Montreal, QC, Canada, June 16-20, 2003

FROST, D.L.

Refereed Conference Proceedings

Ni, Z., Bellerose, J., Goroshin, S. and Frost, D. L., “Reaction Rate and Ignition Temperature of Metal Particles in Various Oxidizing Media,” Proc. 19th Int. Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Japan, July 27-August 1, 2003.

Frost, D. L., Goroshin, S., Janidlo, S., Pryszlak, J., Levine, J., and Zhang, F., “Fragmentation of Reactive Metallic Particles during Impact with a Plate,” Proc. of 13th APS Topical Conference on Shock Compression of Condensed Matter, Portland, OR, June, 2003.

Frost, D. L. and Zhang, F., “Effect of Scale on the Blast Wave Generated by a Metallized Heterogeneous Explosive, in Energetic Materials: Reactions of Propellants”, Explosives and Pyrotechnics, Proc. 34th Int. Annual Conference of ICT, Karlsruhe, Germany, pp. 7.1-7.14, 2003.

Frost, D.L. and Goroshin, S., “Development and Demonstration of a Three-Colour Optical Pyrometer for Fireball Radiation Measurements”, DRDC-Suffield contract report W7702-02R902/001/EDM, Nov., 2003.

HABASHI, W.G.

Journal Publications

H. Beaugendre, F. Morency and W.G. Habashi, “Roughness Implementation: Model Calibration and Influence on Ice Shapes”, AIAA Journal of Aircraft, Vol. 40, No. 6, pp. 1212-1215, November/December 2003.

L. Remaki, H. Beaugendre and W.G. Habashi, “ISOD-An Anisotropic Isovalue-oriented Artificial Viscosity for the Euler and Navier-Stokes Equations”, Journal of Computational Physics, Vol. 186, No. 1, pp. 279-294, 2003.

Refereed Conference Proceedings

W.G. Habashi, H. Beaugendre, F. Morency, “Development of a Second Generation In-Flight Icing Simulation Code”, FEDSM2003-45816, Keynote Lecture, Proceedings of FEDSM’03 4TH ASME-JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6–11, 2003.

P. Tran, G. Baruzzi, I. Akel, W.G. Habashi and J.C. Narramore, “FENSAP-ICE Applications to Complete Rotorcraft Configurations”, Paper 03FAAID-49, FAA In-flight Icing/Ground De-icing International Conference & Exhibition, Washington, June 2003.

Higgins, A.J.

Refereed Journal Publications

Jetté, F.X., Yoskinaka, A.C. Higgins, A.J., and Zhang F., “Effect of Scale and Confinement on Gap Tests for Liquid Explosives,” Propellants, Explosives and Pyrotechnics, Vol 28, Issue 5, 2003, pp. 240-248.

Radulescu, M.I., Higgins, A.J., Lee, J.H.S., and Murray S.B., “An Experimental Investigation of the Direct Initiation of Cylindrical Detonations,” Journal of Fluid Mechanics, Vol. 480, 2003, pp. 1-24.

Referred Conference Proceedings

Landry, D., McIntosh, S., Grand C. and Higgins, A.J., “Detonation Sensitization of Hydrocarbon Fuels via Perioxide Addition,” 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Kanagawa, Japan, July 27-August 1, 2003.

Tanguay, V., Mamen J. and Higgins, A.J. “Propagation of Detonation Initiated by Precursor Shock Wave in Explosive Lined Channels,” 19th International Colloquium on the Dynamics of Explosion and Reactive Systems, Hakone, Kanagawa, Japan, July 27-August 1, 2003.

Laviolette, J.P., Higgins, A.J., Lee, J.H.S. “Interaction Between a Flame and a Rarefaction Wave,” 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Kanagawa, Japan, July 27-August 1, 2003.

Ng, H.D. Higgins, A.J., Kiyanda, C.B. Radulescu, M.I., Lee, J.H.S. Bates, K.R., Nikiforakis, N., “Nonlinear Dynamics and Chaos Analysis of One-Dimensional Pulsating Detonations,” 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Kanagawa, Japan, July 27-August 1, 2003.

Radulescu, M.I., Ng. H.D., Higgins, A.J., and Lee, J.H.S. “Influence of Channel Aspect Ratio on the Failure of Detonation in a Two Dimensional Porous-Walled Channel,” 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Kanagawa, Japan, July 27-August 1, 2003.

Petel, O.E., Tanguay, V., Higgins, A.J., Yoskinaka, A.C., and Zhang, F., “Detonation Propagation in Shock-Compressed Liquid Explosive,” Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter, Portland, Oregon, July 20-29, 2003.

Tanguay, V., and Higgins, A.J., “Comparison of Critical Conditions for Initiation of Porous PETN by Shock Waves Transmitted from Solids and Gases,” 13th Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter, Portland Oregon, July 20-29, 2003.

Conference Paper

Landry D, McIntosh, S., and Higgins, A.J., “Effect of Peroxide Additives on the Detonation Sensitivity of Hydrocarbon Fuels,” AIAA 2003-5203, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, Alabama, July 2003.

HUBERT, Pascal

Journal Publications

Pipes, R. P., Frankland, S., Hubert, P. and Saether, E., “Self-Consistent Geometry, Density and Stiffness for SWCN and Its Hexagonal Arrays”, Journal of Composites Science and Technology, 2003, 63, 10, 1349-1358.

Pipes, R. P., and Hubert, P., “Scale Effects in Carbon Nanostructures: Self-Similar Analysis”, Nanoletters, 2003, 3, 2, 239-243.

Pipes, R. P., and Hubert, P., “Helical Carbon Nanotube Arrays: Thermal Expansion”, Journal of Composites Science and Technology, 2003, 63, 11, 1571-1579.

Refereed Conference Proceedings

Hubert, P., “Potential of Carbon Nanotube Composites for Aerospace Structures", 2003 Aerospace Manufacturing Technology Conference & Exhibition (AMTC); Montreal, September 2003.

Hubert, P., Song, X., Loos, A.C., Grimsley, B. W. and Cano, R. J., “Modeling the Effect of Process Variations during VARTM”, 4th Canadian International Composites Conference, Ottawa, ON, August 2003.

Hubert, P., Pipes, R. B., “Self-Consistent Properties of the MWCN and Hexagonal Arrays as Composite Reinforcements”, The 14th International Conference on Composite Materials (ICCM-14), San Diego, CA, July 2003.

Pipes, R. B., Hubert, P., “Flexural Deformation of the SWCN Array including van der Waals Interaction Forces”, The 14th International Conference on Composite Materials (ICCM-14), San Diego, CA, July 2003.

Song, X., Loos, A. C., Grimsley, B. W., Cano, R. J., and Hubert, P., “Modeling Resin Infusion of Complex Shape Textile Preforms during the VARTM Process”, The 14th International Conference on Composite Materials (ICCM-14), San Diego, CA, July 2003.

Belvin, H., Jensen, B., and Hubert, P., “Thermal Characterization of the Automated Thermoplastic Tow/Tape Placement Process”, 48th SAMPE Annual Conference, Long Beach, CA, May 2003.

KÖVECSES, J.

Journal Publications

Kövecses, J., Piedbœuf, J.-C. and Lange, C., 2003, "Dynamics Modeling and Simulation of Constrained Robotic Systems". IEEE/ASME Transactions on Mechatronics, Vol. 8, No. 2, pp. 165-177.

Kövecses, J. and Cleghorn, W.L., 2003, "Finite and Impulsive Motion of Mechanical Systems Via Jourdain's Principle: Discrete and Hybrid Parameter Models". International Journal of Non-linear Mechanics, Vol. 38, No. 6, pp. 935-956.

Chapters in Books

Piedbœuf, J.-C., Kövecses, J., Moore, B. and L'Archeveque, R., 2003, "Symofros: A Virtual Environment for Modeling, Simulation and Real-Time Implementation of Multibody System Dynamics and Control". In Virtual Nonlinear Multibody Systems, Kluwer Academic Publishers, pp. 317-324.

Refereed Conference Proceedings

Kövecses, J., Piedbœuf, J.-C., 2003, “A Novel Approach for the Dynamic Analysis and Simulation of Constrained Mechanical Systems”. ASME# DETC2003/VIB-48318, 2003 ASME Design Engineering Technical Conferences, 19th Biennial Conference on Mechanical Vibrations and Noise, Sep. 2-6, 2003, Chicago, Illinois.

Moore, B., Kövecses, J. and Piedbœuf, J.-C., 2003, “Symbolic Model Formulation for Dynamic Parameters Identification”. Paper MB2003-058, CD-ROM Proceedings of the Eccomas Thematic Conference on Computational Multibody Dynamics, Lisbon, Portugal, July 1-4, 2003.

L'Archevêque, R., Bedziouk, S., Martin, E., Doyon, M., Kövecses, J. and Allard, P., 2003, “On-orbit mss training simulator”. CD-ROM Proceedings of the 7th International Symposium on Artificial Intelligence and Robotics & Automation in Space: i-SAIRAS 2003, May 19-23, 2003, Nara, Japan.

Lee, J.H.S.

Journal Publications

Ng, H.D. and Lee, J.H.S. (2003) “Direct Initiation of Detonation with a Multi-Step ReactionScheme,” Journal of Fluid Mechanics, Vol. 476, pp. 179-211.

Radulescu, M.I., Ng, H.D., Varatharajan, B. and Lee, J.H.S., (2003) “The Effect of Argon Dilution on the Stability of Acetylene-oxygen Detonantion”. Proceeding of the Combustion Institute, Vol.29, pp.2825-2831.

Ng, H.D. and Lee, J.H.S., (2003) “Direct Initiation of Detonation with Multi-step Reaction Scheme,” Journal of Fluid Mechanics, Vol.478, pp.179-211.

Refeered Conference Proceedings

Chao, J. & Lee, J.H.S. (2003) “Detonation Initiation at a Turbulent Interface,” CD-ROM Proceedings of the 19th Int. Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Japan

Hayashi, A.K., Asami, K, Shiokawa, S., Sato, H. & Lee, J.H.S. (2003) “Detailed Mechanism of Detonation Propagation in Obstacled Tube,” CD-ROM Proceedings of the 19th Int. Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Japan

Ng, H.D., Nikiforakis, N. & Lee, J.H.S. (2003) “Head-on Collision of a Detonation with a Planar Shock Wave", CD-ROM Proceedings of the 24th Int. Shock Wave Symposium, China

Chapters in Books

Lee, J.H.S., (2003) “The Universal Role of Turbulence in the Propagation of Strong Shocks and Detonation Waves,” Chapter 3 in High-Pressure Shock Compression of Solids VI: Old Paradigms and New Challenges by Yasuyuki Horie, Lee Davidson, and Naresh N. Thadhani, Springer-Verlag New York, pp. 121-144

(---see also Higgins, A.J.)

LEE, T.

Journal Publications

Birch, D. and Lee, T., “The roll-up and near field of a tip vortex,” Journal of Aircraft, Vol. 40, No. 3, 2003, pp. 603-608.

Gerontakos, P. and Lee, T., “An experimental analysis of the flow over an oscillating airfoil”, CASI 9th Aerodynamics Symposium, 2003, pp. 1-12.

Birch, D., Panagakos, A. and Lee, T. “PIV study of the vortex wake behind a rotationally oscillating cylinder,”, CASI 9th Aerodynamics Symposium, 2003, pp. 1-10.

Birch, D., Lee, T., Mokhtarian, F. and Kafyeke, F., “The structure and induced drag of a tip vortex,” CASI 9th Aerodynamics Symposium, 2003, pp. 1-11.

LESSARD, L.

Chapters in Books

Lessard, Larry and Shokrieh, M., “Multiaxial Fatigue”, Book Chapter in Fatigue of Composites, H. Harris, editor, Woodhead Publishing Ltd., 2003.

Refereed Conference Proceedings

Lessard, Larry, Haider, Mohsan, Hubert, Pascal, and Trochu, François, and Octeau, “Experiments and Procedure for Examination of RTM Process Parameters for Obtaining Class A Surface Finish", ICCM/14, International Conference on Composite Materials, San Diego, California, July 14-18, 2003, CD ROM.

MATEESCU, D.

Journal Publications

D. Mateescu. Analysis of aerodynamic problems with geometrically unspecified boundaries using an enhanced Lagrangian method. Journal of Fluid and Structures, 2003, pp. 603-626.

D. Mateescu and M. Abdo. Theoretical solutions for unsteady flows past oscillating flexible airfoils using velocity singularities. AIAA Journal of Aircraft, 2003, Vol. 40, No. 1, pp. 153-163.

D. Mateescu, J. F. Seytre and A. M. Berhe. Theoretical solutions for finite-span wings of arbitrary shapes using velocity singularities. AIAA Journal of Aircraft, 2003, Vol. 40, No. 3, pp. 450-460.

Refereed Conference Proceedings

D. Mateescu and M. Abdo. Nonlinear theoretical solutions for airfoil aerodynamics. 21st AIAA Applied Aerodynamics Conference, June 2003, Orlando, Florida, AIAA Paper 2003-4296, pp. 1-16.

D. Mateescu, J. F. Seytre and A. M. Berhe. Aerodynamic solutions for finite-span wings of arbitrary shapes. Applied Aerodynamics Conference, 41st AIAA Aerospace Sciences Meeting, January 2003, Reno, Nevada.

D. Mateescu and M. Abdo. Unsteady aerodynamic solutions for oscillating airfoils. 41st AIAA Aerospace Sciences Meeting, January 2003, Reno, Nevada, AIAA Paper 2003-227, pp. 1-14. MISRA, Arun K.

MISRA, A.K.

Journal Publications

Cao, Y., Modi, V.J., De Silva, C.W., Chu, M., Chen, Y., and Misra, A.<., "Trajectory Tracking Experiments Using a novel Manipulator", Acta Astronautica, Vol. 52, No. 7, 2003, pp. 523-540.

Refereed Conference Proceedings

Wong, B. & Misra, A.K., “Dynamics of a Multi-Tethered System near the Sun-Earth Lagrangian Point”, 13th AAS/AIAA Space Flight Mechanics Meeting, Ponce, Puerto Rico, 9-13 February 2003, Paper No. AAS-03-218.

Woo, M.-Y.P. & Misra, A.K., “Dynamics of a Tethered Space Manipulator”, AAS/AIAA Astrodynamics Specialist Conference, Big Sky, Montana, U.S.A., 3-7 August 2003, Paper No. AAS-03-534.

Misra, A.K., “Dynamics and Control of Tethered Satellite Systems”, Breakwell Memorial Lecture International Astronautical Congress, Bremen, Germany, 29 Sept – 3 Oct. 2003.

Misra, A.K. & Pizzaro-Chong, A., “Dynamics of Tethered Satellites Located in a Hub-Spoke Configuration”, 10th ISCOPS Conference, Tokyo, Japan, 10-12 December 2003, Paper No. C1-02.

(---see also Angeles, J. and Païdoussis, M.)

MONGRAIN, R.

Journal Publications

Brunette J, Mongrain R., Bertrand O.F., L’Allier P., Tardif J.C., Biomechanics of plaque rupture, Journal of Clinical Engineering, Vol. 28 (3), pp 163-173, 2003

Mongrain R., Galaz R., Ranga A., El-Khoury N., Bertrand O.F., Tardif J.C., Structural analysis of coronary stent interacting with the vascular wall during angioplasty, Archives of Physiology and Biochemistry, Vol. 111, Supplement Septermber, p 8, 2003

Mongrain R., Bulman-Fleming N., Tardif J.C., Bertrand O.F., 3D numerical simulations of stent based local drug delivery, Archives of Physiology and Biochemistry, Vol. 111, Supplement Septermber, p 57, 2003

Refereed Conference Proceedings

Mongrain R., Bulman-Fleming N., Bertrand O.F., 3D Numerical Simulations of Stent-Based Local Drug Delivery using realistic stent and vascular wall structures, ASME Summer Bioengineering Conference, Key Biscayne, 2003

Mongrain R., Bulman-Fleming N., Bertrand O.F., 3D numerical simulations of stent based local drug delivery using realistic post implantation geometries, Endocoronary Biomechanics and Restenosis Symposium, Paris, 2003

Mongrain R., Galaz R., Ranga A., El-Khoury N., Tardif J.C., Structural analysis of a coronary stent interacting with an hyperelastic arterial wall, Endocoronary Biomechanics and Restenosis Symposium, Paris, 2003

Ranga A., Mongrain R., Cartier R., Finite element analysis of a prosthetic annulo-plasty ring in interaction with the aortic root structure, Twenty Second Southern Biomedical Engineering Conference, Symposium on Aortic Valve Sparing Surery, Charlotte, 2003

Mongrain R., Bulman-Fleming N., Tardif J.C., Bertrand O.F., 3D numerical simulations of stent based local drug delivery, XXVIII Congres de la Societe de Biomecanique, Poitiers, 2003

Mongrain R., Galaz R., Ranga A., El-Khoury N., Bertrand O.F., Tardif J.C., Structural analysis os coronary stent interacting with the vascular wall during angioplasty, XXVIII Congres de la Societe de Biomecanique, Poitiers, 2003

Sherknies, D.; Meunier, J.; Mongrain, R.; Tardif, J.-C., 3D Trajectory Assessment of an IVUS Transducer from Single-Plane Cineangiograms: a Phantom Study, Proceedings of the Annual International Conference IEEE Engineering in Medicine and Biology Society, 1094-687X; 25TH; Vol. 1, pp, 690-693, 2003

Poirier A., Lerouge S., Gaboury L.A., Mongrain R., Merhi Y., Yahia L., Oliva V.L., Thrombosis of inferior vena cava filters: an analysis of explanted devices, Society for Biomaterials, 29th Annual Meeting and Exposition, Reno, Abstract # 169, p. 32, 2003

Galaz R., Mongrain R., Aplicaciones Actuales de la Biomecanica, XVI Congreso Internationcal de Ingenieria Mecanica, Instituto Technologico y de Estudios Superiores de Monterry, Mexico, October, 2003

Cadrin-Chenevert A., Mongrain R., Tardif J.C., Reconstruction 3D de l’arbre coronarien, Congres Annuel des Stagiaires de Recherche en Sante de la Faculte de Medecine de l’Universite de Montreal, 2003

MYDLARSKI, L.

Journal Publications

Mydlarski, L., 2003. Mixed velocity-passive scalar statistics in high-Reynolds-number turbulence. Journal of Fluid Mechanics, 475, pp. 173-203.

Refereed Conference Proceedings

Beaulac, S. and Mydlarski, L., 2003. The dependence on initial conditions of scalar mixing in an inhomogeneous flow. Bulletin of the American Physical Society, Volume 48, No. 10, p. 150

NADARAJAH, S.

Refereed Conference Proceedings

Nadarajah, Siva; Jameson, Antony, and Alonso, Juan J. Adjoint-Based sonic boom reduction for wing-body configurations in supersonic flow. CASI 50th. Annual General Meeting and Conference, Montreal, QC, Canada, April, 2003

Nadarajah, Siva; McMullen, Matthew, and Jameson, Antony. Optimal control of unsteady flows using a time accurate and nonlinear frequency domain methods. AIAA paper 2003-3875, AIAA 16th Computational Fluid Dynamics Conference, Orlando, FL, June 2003.

NAHON, M.

Journal Publications

B. Buckham, M. Nahon, M. Seto, X. Zhao and C. Lambert, ‘Dynamics and Control of a Towed Underwater Vehicle System, Part I: Model Development’, Ocean Engineering, Vol. 30, No. 4, pp. 453-470.

C. Lambert, M. Nahon, B. Buckham and M. Seto, ‘Dynamics and Control of a Towed Underwater Vehicle System, Part II: Model Validation and Turn Maneuver Optimization’, Ocean Engineering, Vol. 30, No. 4, pp. 471-485.

C. Lambert and M. Nahon, ‘Stability Analysis of a Tethered Aerostat’, AIAA Journal of Aircraft, Vol. 40, No. 4, July-August 2003, pp. 705-715.

Refereed Conference Proceedings

C. Lambert, A. Saunders, C. Crawford and M. Nahon, ‘Design of a One-Third Scale Multi-Tethered Aerostat System for Precise Positioning of a Radio Telescope Receiver’, 2003 CASI Flight Mechanics and Operations Symposium, Montreal, April 28-30, 2003.

B. Buckham, R. Driscoll, M. Nahon and B. Radanovic, ‘Three-Dimensional Dynamics Simulation of Slack Tether Motion in an ROV System’, 13th International Offshore and Polar Engineering Conference, May 25-30, 2003.

G. Rekleitis, M. Nahon and S. Saha, ‘Kinematics and Dynamics Analysis of a Three-Legged Parallel Mechanism Actuated by AGVs’, 2003 CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montreal, May 30 2003.

M. Nahon, D. Chalmers and P. Dewdney, ‘Design and Performance of the Tethered Aerostat Subsystem of the Large Adaptive Reflector (LAR)’, 2003 Meeting of the International Union of Radio Science (invited paper) June 22-27, 2003.

J. Evans and M. Nahon, ‘Dynamics Modeling and Performance Evaluation of an Autonomous Underwater Vehicle’, 13th International Symposium on Unmanned Untethered Submersible Technology, August 24-27, 2003.

NEMES, J. A.

Journal Publications

F.M. Al-Abbasi and J.A. Nemes, 2003, “Micro Mechanical Modeling of the Effect of Particle Size Difference in Dual Phase Steels,” Int. J. of Solids and Structures, Vol. 40 pp 3379-3391.

G. Baroud, J. Nemes, P. Heini, and T. Steffen, 2003, “Load Shift of the Intervertebral Disc After A Verebroplasty: a Finite Element Study,” Eur. Spine J. pp. 421-426.

G. Baroud, J. Nemes, S. Ferguson, and T Steffen, 2003, “Material Change in Osteoporotic Human Cancellous Bone Following Infiltration with Acrylic Bone Cement for a Vertebral Cement Augumentaion”. Computer Methods in Biomechanics & Biomedical Engineering, Vo. 6, pp. 133-139.

Refereed Conference Proceedings

J.A. Nemes and F.M. Al-Abbasi, 2003 “Micro Mechanical Models for Optimization of Constituent Volume Fractions in Dual Phase Steels,” 9th International Conference on Materials.

A.S. Milani, J.A. Nemes, X-T. Pham, and G. Lebrun, 2003, “The Effect of Fiber Misalignment on Parameter Determinatin Using Picture Frame Test,” ICCM-14.

W. Li, F. Ben-Yahia, J.A. Nemes, “Dynamics Pentratin of Metal/Fiber Laminates’, CANCOM 2003.

C. El-Laham, J.A. Nemes, N. Nickoletopoulos, and M. Hone, “Formability Criteria for Cold Heading Applications,” Thermec 2003.

F.M. Al-Abbasi aind J.A. Nemes, “Experminetal and Finite Element Modelingfor Prediction of Optimized Phase Combinations in Dual Phase Steel,” Thermec 2003.

C.El-Laham, A.S. Milani and J.A. Nemes, 2003, “Optimization of Prefrom Dies Using a Multi-Criteria Taguchi Approach and Finite Element Analysis,” 5th International Industrial Engineering Conference, Quebec City, Canada.

OSTOJA-STARZEWSKI, M.

Chapter in Book

Ostoja-Starzewski, M., “Selected topics in stochastic wave propagation,” Chapter 3 in Advances in Mechanics and Mathematics - II, pp. 145 - 205, eds. D.Y. Gao and R.W. Ogden, Kluwer Academic Publishers, 2003.

Journal Publications

Ostoja-Starzewski, M., and Trebicki, J., “On the distance to blow-up of acceleration waves in random media,” Continuum Mechanics and Thermodynamics (in honour of I. Müller), Vol. 15, 21-32, 2003.

Ostoja-Starzewski, M., and Castro, J., “Random formation, inelastic response, and scale effects in paper,” Philosophical Transactions of the Royal Society, London A (special issue: Micromechanics of Fluid Suspensions and Solid Composites), Vol. 361(1806), pp. 965-986, 2003.

Castro, J., and Ostoja-Starzewski, M., “Elasto-plasticity of paper,” Intl. Journal of Plasticity (in honour of Z. Mróz), Vol. 19(10), pp. 2083-2098, 2003.

Ostoja-Starzewski, M., and Woods, A. N., “Spectral finite elements for vibrating rods and beams with random field properties,” Journal of Sound and Vibration, Vol. 268, pp. 779-797, 2003.

Liszka, T., and Ostoja-Starzewski, M., “Effects of microscale material randomness on the attainment of optimal structural shapes,” Structural and Multidisciplinary Optimization, Vol. 25, pp. 1-10, 2003.

Ostoja-Starzewski, M., “Thermoelastic waves in a helix with parabolic or hyperbolic heat conduction,” Journal of Thermal Stresses (in honour of R.B. Hetnarski), Vol. 26, pp. 1205-1219, 2003.

Jasiuk, I., and Ostoja-Starzewski, M., “On the reduction of constants in planar Cosserat elasticity with eigenstrains and eigencurvatures,” Journal of Thermal Stresses (in honour of R.B. Hetnarski), Vol. 26, pp. 1221-1228, 2003.

Refereed Conference Proceedings

Ostoja-Starzewski, M., and Jasiuk, I., “On the reduced parameter dependence in planar Cosserat elasticity with eigenstrains and eigencurvatures,” in Symposium dedicated to R.B. Hetnarski, The 5th International Congress on Thermal Stresses and Related Topics, pp. TA-2-3-(1-4), Blacksburg, VA, 2003.

Ostoja-Starzewski, M., “Thermoelastic waves in a helix,” in Symposium dedicated to R.B. Hetnarski, The 5th International Congress on Thermal Stresses and Related Topics, pp. WM-1-4-(1-4), Blacksburg, VA, 2003.

PAÏDOUSSIS, Michael P.

Journal Publications

Païdoussis, M.P. & Curling, Ll. R., “Analyses of Random low-Induced Vibration of Cylindrical Structures Subjected to Turbulent Axial Flow”, Journal of Sound and Vibration, Vol. 264, 2003, pp. 795-833.

Amabili, M. & Païdoussis, M.P., “Review of Studies on Geometrically Nonlinear Vibrations and Dynamics of Circular Cylindrical Shells and Panels, with and without Fluid-Structure Interaction”, Applied Mechanics Reviews, Vol. 56, 2003, pp. 349-381.

Sarkar, A. & Païdoussis, M.P., “A Compact Limit-Cycle Oscillation Model of a Cantilever Conveying Fluid”, Journal of Fluids and Structures, Vol. 17, 2003, pp. 525-539.

Amabili, M., Sarkar, A. & Païdoussis, M.P., “Reduced-Order Models for Nonlinear Vibrations of Cylindrical Shells via the Proper Orthogonal Decomposition Method”, Journal of Fluids and Structures, Vol. 18, pp. 2003, 227-250.

Refereed Conference Proceedings

Païdoussis, M.P., “Some Quandaries and Paradoxes in Fluid-Structure Interactions with Axial Flows”, Plenary Talk, 2003 IUTAM Symposium on Integrated Modeling of fully Coupled Fluid Structure Interactions using Analysis, Computations and Experiments, New Brunswick, NJ, June 2003, pp. 247-266. Dordrecht: Kluwer.

Modarres-Sadeghi, Y., Païdoussis, M.P., Semler, C. & Picot, P., “Nonlinear Dynamics of Slender Cylinders supported at both Ends and subjected to Axial Flow”, 2003 IUTAM Symposium on Integrated Modeling of fully Coupled Fluid Structure Interactions using Analysis, Computations and Experiments, New Brunswick, NJ, June 2003, pp. 233-245. Dordrecht: Kluwer.

Karagiozis, K., Païdoussis, M.P., Grinevich, E., Misra, A.K. & Amabili, M., “Stability and Non-Linear Dynamics of Clamped Circular Cylindrical Shells in Contact with Flowing Fluid”, 2003 IUTAM Symposium on Integrated Modeling of fully Coupled Fluid Structure Interactions using Analysis, Computations and Experiments, New Brunswick, NJ, June 2003, pp. 375-390. Dordrecht: Kluwer.

Amabili, M., Sarkar, A. & Païdoussis, M.P., “Nonlinear Vibrations of Shells: Compact Model using the Proper Orthogonal Decomposition Method”. Keynote Lecture, 2nd MIT Conference on Computational Fluid and Solid Mechanics, June 2003, Compilation of Abstracts, p. 6.

PRICE, S.J.

Journal Publications

Akbari, M.H. and Price. S.J., 2003, "Simulation of dynamic stall for a NACA 0012 airfoil using a vortex method", Journal of Fluids and Structures, Vol. 17, pp. 855-874.

Poirel, D. and Price S.J., 2003, "Response probability structure of a structurally nonlinear fluttering airfoil in turbulent flow", Probabilistic Engineering Mechanics, Vol 18, pp. 185-202.

Poirel, D. and Price S.J., 2003, "Random binary (coalescence) flutter of a two-dimensional linear airfoil", Journal of Fluids and Structures, Vol. 18, pp. 23-42.

RADZISZEWSKI, P.

Refereed Conference Proceedings

Radziszewski, P., Orford, I., Strah, L. (2003), Lifter Design Using a DOE Approach with a DEM Charge Motion Model, Canadian Mineral Processors, January.

Radziszewski, P. (2003), Engineering Fundamentals in the Cement Industry - a ball mill case study, Portland Cement Association Professors Forum, Dallas, Tx., April.

Radziszewski, P., Chenje, T., Mongrain, R., Laplante, A., Ouellet, J., Kirk, A., Knutt, M., Gandell, T., Winer, L. (2003), In-Class Wireless Polling System For Interactive Teaching/Learning, Colloque FITIC 2003 / ETICT Symposium, E. Polytechique, May.

Radziszewski, P., Thakur, L.K. (2003), Predicting the Contribution of Impact Wear to Total Steel Media Consumption, XXII Int’l Mineral Processing Congress, CapeTown, SA, September/October.

Refereed Conference Proceedings

Radziszewski, P., Orford, I., Strah, L. (2003), Lifter Design Using a DOE Approach with a DEM Charge Motion Model, Proceedings 2003, 35th Meeting of the CMP, 527-542 (ISBN: 1-894475-31-3)

SHARF, I.

Journal Publications

Pond, B., Van Vliet J. and Sharf, I., "Prediction Tools for Active Damping and Motion Planning of Flexible Macro-Micro Manipulators," AIAA Journal of Guidance, Control and Dynamics, Vol. 26, No. 2, pp. 267-272, 2003.

Erickson, D., Weber M. and Sharf, I., "Contact Stiffness and Damping Estimation for Robotic Systems," IEEE Transactions on Robotics and Automation, Vol. 2, No. 1, pp. 41-57, 2003.

Refereed Conference Proceedings

Sharf, I. and Bykov A., ''Compliance Optimisation for Robot Assembly,'' Proc. 19th Biennial Conference on Mechanical Vibration and Noise, DETC 2003, paper # 48501, pp. 1-10, Chicago, IL, USA, September 2-6, 2003.

TIMOFEEV, E.

Journal Publications

Hassan T., Timofeev E.V., Ezura M., Saito T., Takahashi A., Takayama K., Yoshimoto T. “Hemodynamic analysis of an adult vein of Galen aneurysm malformation by use of 3D image-based computational fluid dynamics,” American Journal of Neuroradiology, 2003, vol. 24, pp. 1075-1082

Timofeev E.V., Voinovich P.A., Galyukov A.O, Saito T., Takayama K.“On the adaptive unstructured simulations of blast wave propagation and attenuation in complex geometries and various media: an illustrated review” Computational Fluid Dynamics Journal, 2003, vol.12(2), pp. 171-177

Voinovich P., Merlen A., Timofeev E.V., Takayama K., “A Godunov-type finite-volume scheme for unified solid-liquid elastodynamics on arbitrary two-dimensional grids” Shock Waves, 2003, vol. 13, pp. 221-230

Refereed Conference Proceedings

Tahir R.B., Molder S, Timofeev E.V., “Unsteady starting of high Mach number air inlets – A CFD study”, AIAA Paper Nr. 2003-5191, 10p.

THOMSON, V.

Journal Publications

Thomson, V., Jin, G. “A new framework for MRP systems to be effective in engineered-to-order environments”, Robotics & CIM, 19 (2003) 533-541

Refereed Conference Proceedings

Bhuiyan, N., Thomson, V., Gerwin, D. “Implementing Concurrent Engineering: A Case Study”, Concurrent Engineering – The Vision for the Future Generation in Research and Operations: Advanced design, production and management systems, Cha, J., Jardin-Gonçalves, R., Steiger-Garção, A., Ed., A.A. Balkema Publishers, Lisse, Netherlands, 2003, p3-8

Antaki, M., Schiffauerova, A., Thomson, V. “Evaluating the Performance of Technical Information Transfer in New Product Development”, Concurrent Engineering – The Vision for the Future Generation in Research and Operations: Advanced design, production and management systems, Cha, J., Jardin-Gonçalves, R., Steiger-Garção, A., Ed., A.A. Balkema Publishers, Lisse, Netherlands, 2003, p1205-1210

Bhuiyan, N., Thomson, V., Jaafar, R. “The Effects Of Communication On CE Processes”, Concurrent Engineering – The Vision for the Future Generation in Research and Operations: Advanced design, production and management systems, Cha, J., Jardin-Gonçalves, R., Steiger-Garção, A., Ed., A.A. Balkema Publishers, Lisse, Netherlands, 2003, p73-78

Girard, P.; Hou B.; Thomson, V.; Yousefi A.; DiRaddo R.W.; "Simulation and Experimental Hybrid Model-based Soft Sensors for Intelligent Control of Forming Operations"; The Fourth International Conference on Intelligent Processing and Manufacturing of Materials, May 2003, Sendai, Japan (best paper)

Girard, P.; Thomson, V.; Hou, B.; Yousefi, A.; DiRaddo R.W.; "On-line Hybrid Model-Based Tuning of Simulation Provides Soft Sensors for the Estimation of Sheet Temperature Distributions in Thermoforming"; ANTEC 2003; Nashville, Tennessee, USA

VENGALLATORE, S.

Journal Publications

Vengallatore, S., and Spearing, S. M., “Materials selection in micromechanical design: An application of the Ashby approach,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 12, pp. 3 – 10 (2003)

Vengallatore, S., and Spearing, S. M., “Materials selection for microfabricated electrostatic actuators,” Sensors and Actuators A, vol. 102, pp. 279 – 285 (2003)

Vengallatore, S., Swan, A. K., Unlu, M. S., Goldberg, B. B., and Spearing, S. M., “Micro-Raman measurement of bending stresses in micromachined silicon flexures,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 12, pp. 779 – 787 (2003)

Vengallatore, S., and Spearing, S. M., “A critical review of microscale mechanical testing methods used in the design of microelectromechanical systems,” Experimental Mechanics (Special Issue), vol. 43, pp. 238 – 247 (2003)

Refereed Conference Publication

Vengallatore, S., Peles, Y., Arana, L. R., and Spearing, S. M., “Controlled modification of micromachined silicon surfaces using colloidal micro- and nanoparticles,” Technical Digest of the 12th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers ’03), pp. 726 – 729, (2003).

ZSOMBOR-MURRAY, P.

Refereed Conference Proceedings

Zsombor-Murray, P.J., Hayes, M.J.D. & Husty, M.L. (2003) “Elementary Kinematics from an Advanced Standpoint”,Proc. of 19th Canadian Conference of Applied Mechanics, ISBN 0-88953-264-8, Calgary, 03-06, v.2, pp.398-399.

Hayes, M.J.D., Zsombor-Murray, P.J. & Gfrerrer, A. (2003) “Largest Ellipse Inscribing an Arbitrary Polygon”, Proc. of 19th Canadian Conference of Applied Mechanics, ISBN 0-88953-264-8, Calgary, 03-06, v.1, pp.164-164.

Zsombor-Murray, P.J., Hayes, M.J.D. & Husty, M.L. (2003) ; “Extreme Distance to a Spatial Circle”. Proc. 003 Symp. on Mechanisms, Machines & Mechatronics, Cdn. Space Agency, St-Hubert, 03-05, http://www.me.uvic.ca.ram/CCToMM_Symposium, pp.348-362.