Published Theses (2025)
Mathieu Petit, M.Sc, Thesis 2025 “Understanding and mitigating hydrogen embrittlement of steels through modelling and design”
Papers Published in Refereed Journals (2025)
Gonzalez-Morales DR, Isac MM, Guthrie RIL . “Enhanced Ladle Shroud Performance using a Novel Design Concept versus a Conventional Shroud Design”. ISIJ International. 2025. In Press
Rohit Tiwari, Mihaiela M. Isac, Roderick I.L. Guthrie; Development of LiMCA (Liquid Metal Cleanliness Analyzer) Sensor: A Comprehensive Review, In: Edwards, L. (eds) Light Metals 2025. TMS 2025. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-031-80676-6_20
Chiesa, F., Levasseur, D., Marin, G.; “Temperature Losses in Cups of Tilt-Poured Permanent Molds”; Transactions of the American Foundry Society, Vol. 132, paper 25-016, 2025
Farnia Dastoorian, Janusz Kozinski, Leila Pakzad, “Experimental and Computational Analysis of pMDI Aerosol Transport in Pediatric Airways: Impact of Inhalation Flow, Mucus Rheology, and Actuation Timing”, May 2025, DOI:10.21203/rs.3.rs-6785337/v1, License CC BY 4.0
Soumik Chakma, Mehedi Hasan, Sudip K Rakshit, Janusz Kozinski, Kang kang Kang, “Review of recent advances in the design, synthesis, and modification of biochar for remediation of heavy metal pollution in water”, Wiley,The Canadian Journal of Chemical Engineering, April 2025, DOI:10.1002/cjce.25693, LicenseCC BY 4.0
Mona Mohammadkhani, Janusz Kozinski, Leila Pakzad, “Atomization characteristics of soft mist inhaler (SMI) devices: aerosolized particle delivery through the respiratory tract—an innovative numerical and experimental study”, April 2025, Journal of Aerosol Science 188(May), DOI:10.1016/j.jaerosci.2025.106593, License CC BY-NC-ND 4.0
Mahsa Jahed, Janusz Kozinski, Leila Pakzad “Experimental and Numerical Investigation of Drug Delivery in Patient-Specific Male and Female Airways: Role of Airway Wall Motion, Breathing Patterns, and Mucus Layer”, January 2025, DOI:10.2139/ssrn.5276196
A. Prasad, M.K. Tummalapalli, L. Malakkal, L. Bichler, J. Szpunar, C. Liu, “Master (spark plasma) sintering curve of UO2 and UO2-10 vol. % mo fuel materia”l, Journal of Nuclear Engineering and Radiation Science. 11 (2025). doi:10.1115/1.4068390.
T.A. Jack, F. Fazeli, J. Szpunar, Equivalence of hydrogen uptake in X70 pipeline steel via gaseous and electrochemical charging, International Journal of Hydrogen Energy. 123 (2025) 150–161. doi:10.1016/j.ijhydene.2025.03.398.
E. Entezari, A.K. Singh, H. Mousavi, J.L. Velazquez, J. Szpunar, A cost-effective model for synergistic effects of microstructure and crystallographic texture on hydrogen-induced crack growth and corrosion rates in pipeline steels, Materials Characterization. 223 (2025) 114917. doi:10.1016/j.matchar.2025.114917.
E. Entezari, A.K. Singh, H. Mousavi, J.L. Velazquez, J. Szpunar, A cost-effective model for synergistic effects of microstructure and crystallographic texture on hydrogen-induced crack growth and corrosion rates in pipeline steels, Materials Characterization. 223 (2025) 114917. doi:10.1016/j.matchar.2025.114917.
T.A. Jack, J. Szpunar, Direct observation of the influence of grain orientation on the corrosion of Pipeline Steels, Materials Characterization. 222 (2025) 114836. doi:10.1016/j.matchar.2025.114836.
T.A. Jack, M.A. Webb, K.M.M. Rahman, F. Fazeli, J. Szpunar, Hydrogen uptake and embrittlement behavior in pipeline steels: Insights from slow strain rate testing and synchrotron micro-ct imaging, Engineering Failure Analysis. 172 (2025) 109419. doi:10.1016/j.engfailanal.2025.109419
T.A. Jack, F. Fazeli, J. Szpunar, Thermal desorption analysis of hydrogen uptake in pipeline steels after gaseous and electrochemical charging, Journal of Materials Science. 60 (2025) 2580–2606. doi:10.1007/s10853-024-10571-1
Rishav Raj. J.Barry Wiskel, Michael James Gaudet, Hani Henein, Model and validation of NbC nanoprecipitation during TMCP of X70 microalloyed steels, April 2025, Journal of Materials Research and Technology 36(4) DOI: 10.1016/j.jmrt.2025.04.155, License CC BY-NC 4.0,
Tailin Ren, J. Barry Wiskel, Douglas G. Ivey, Hani Henein, Laurie Collins, Greg Lehnhoff, Michael James Gaudet, Eric Willett, “The Effect of CWTSAW on the Toughness of Heavy-Gauge X70: Part I – Correlating HAZ Microstructure with Cold Wire Feed Rate”, January 2025, Welding Journal 104(03):94-105, DOI: 10.29391/2025.104.008
Rajwinder Singh, Muhammad Ahmad, Alan Caceres, Roger Eybel, Mamoun Medraj, "The influence of defects on hydrogen-induced electrical resistivity changes in Fe-based systems: A first-principles study", International Journal of Hydrogen Energy, Vol. 126, 2025, Pages 429-438, https://doi.org/10.1016/j.ijhydene.2025.04.099
Juried Conference Proceedings (2025)
Gonzalez-Morales DR, Isac MM, Guthrie RIL. Three-Dimensional Mathematical Modelling of Casting Thin Strips of Aluminum Alloys (AA6111, AA2024, AA5182, & AA7068) using the Horizontal Single Belt Casting (HSBC) Process. TMS 2025 March 23–27, 2025 MGM Grand Las Vegas Hotel & Casino, Las Vegas, Nevada. https://doi.org/10.1007/978-3-031-80676-6_25
Gonzalez-Morales DR, Isac MM, Guthrie RIL. Enhanced Ladle Shourd Performance using a Novel Design Concept and Comparison with a Conventional Design. AISTECH 2025. May 4, 2025 – May 7, 2025. Nashville, Tennessee, USA.
Gonzalez-Morales DR, Isac MM, Guthrie RIL. Three-dimensional Mathematical Modelling of the Solidification of Aluminum Alloys Strip Produced via the Horizontal Single Belt Casting (HSBC) Pilot-Scale Process. To be presented at the Conference of Metallurgists (COM) and LightMAT 2025. July 7, 2025 – July 10, 2025. Montreal, Canada.
Gonzalez-Morales DR, Isac MM, Guthrie RIL. Improvement of Ladle Shroud Designs and its Effect on Fluid Flow Behavior for Steelmaking through Computational Fluid Dynamics. Summitted and to be presented at the 12th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT 2025). July 15, 2025 - July 17, 2025. Imperial College London Conference Center, London, United Kingdom.
Rohit Kumar Tiwari, Daniel Gonzales Morales, Mihaiela M. Isac*, and Roderick I.L. Guthrie; Microbubble Generation through Porous Refractory Cylindrical Plugs for the Efficient Removal of Fine Inclusions in Steelmaking, AISTECH 2025. May 4, 2025 – May 7, 2025. Nashville, Tennessee, USA.
Rohit Kumar Tiwari, Mihaiela M. Isac*, and Roderick I.L. Development of LiMCA (Liquid Metal Cleanliness Analyzer) Sensor: A Comprehensive Review; TMS 2025 March 23–27, 2025 MGM Grand Las Vegas Hotel & Casino, Las Vegas, Nevada.