Papers Published in Refereed Journals (2023)
Rohit Tiwari, Daniel Gonzalez Morales, Mihaiela M. Isac, Roderick I.L. Guthrie, “A Novel Experimental Set-up for Generating Microbubbles for the Removal of Inclusions from Water and Liquid Metals”; CIM Journal (2023), 15(1), pp 21–32. https://doi.org/10.1080/19236026.2023.2255094.
Daniel Gonzalez Morales, Bruno Girard, Chantal Labrecque, Mihaiela Isac, Roderick Guthrie; “Mathematical and Physical Modelling of Transient Multi-Phase Flows in a Ladle Shroud during Start-Up”, Processes 2023, 11, 1628. https://doi.org/10.3390/ , pr11061628.
Roderick I. L. GUTHRIE, and Mihaiela M. ISAC, “Bubble Characteristics Required for the Complete Removal of Alumina Inclusions from Steel Melts”, published in Steel Research International, srin.2023001382023.
Gonzalez-Morales DR, Isac MM, Guthrie RIL, “A review of past and present developments of the horizontal single belt casting (HSBC) process”. CIM Journal 2023, 1, 16. https://doi.org/10.1080/19236026.2023.2255481
Gonzalez-Morales DR, Girard B, Labrecque C, Isac MM, Guthrie RIL. Mathematical and Physical Modelling of Transient Multi-Phase Flows in a Ladle Shroud during Start-Up. Processes. 2023;11:1628. https://doi:10.3390/pr11061628
Chiesa, F., Levasseur, D., Marin, G., “Permanent Mold Casting of Aluminum Eco535 Clamps”; Transactions of the American Foundry Society, Vol. 130, paper 23-005 (10p), 2023
Chiesa, F., “Improving the Tensile Properties of Rheocast Parts by an “Outgassing” Pre-Treatment”, Modern Casting, p 3-4, October 2023
Reza Khatib Zadeh Davani, Ehsan Entezari, Mohammad Ali Mohtadi Bonab, Sandeep Yadav, Jhon Freddy Aceros Cabezas, Jerzy A. Szpunar, “Effect of Electrochemical Hydrogen Charging on Hydrogen Embrittlement and Mechanical Properties of Quenched Tempered X100 Pipeline Steel”, December 2023, Journal of Failure Analysis and Prevention 24(1), DOI: 10.1007/s11668-023-01841-2
Mojtaba Vakili-Azghandi, Mohammad Famil Hatami, Jerzy A. Szpunar, “Mechanical properties and corrosion behavior of titanium surface biocomposites reinforced with Al2O3 particles fabricated by friction stir processing”, December 2023, Materials Chemistry and Physics 313:128749, DOI: 10.1016/j.matchemphys.2023.128749
Edison Haro, A.G Odeshi, Santiago David Castellanos, Xavier Sanchez, Lenin Rómulo Abatta Jácome, Linker Criollo, Alejandra Alban, Jerzy A. Szpunar, “Ballistic impact performance of hybrid composite armors made of aluminum foam containing the dispersion of shear thickening fluid made of various synthetic nano-fillers”, November 2023, DOI: 10.1016/j.jcomc.2023.100420
W. Qin, Jerzy A. Szpunar, “Uncovering the origin of critical hydrogen concentration for initiation of hydrogen-induced cracking and its relation to inclusion type and size”, November 2023, Journal of Materials Research and Technology 27, DOI: 10.1016/j.jmrt.2023.10.294
Reza Khatib Zadeh Davani, Enyinnaya George Ohaeri, Sandeep Yadav, Jerzy A. Szpunar, Jing Su, Michael James Gaudet, Muhammad FIRDAUS Rashid, Muhammad Arafin, “Crystallographic texture and the mechanical properties of API 5L X70 pipeline steel designated for an arctic environment”, October 2023, DOI: 10.1016/j.msea.2023.145849
Ehsan Entezari, Jorge Luis González Velázquez, Diego Rivas López, Manuel Alejandro Beltrán Zúñiga, Hojjat Mousavisogolitappeh, Reza Khatib Zadeh Davani, Jerzy A. Szpunar, “An experimental and statistical study on the characteristics of non-metallic inclusions that serve as hydrogen-induced crack nucleation sites in pipeline steel”, October 2023, Engineering Failure Analysis, Engineering Failure Analysis, 154(5):107695, DOI: 10.1016/j.engfailanal.2023.107695
W. Qin, Kiran Kumar, Gu Show, Jerzy A. Szpunar, Jerzy A. Szpunar, “Determining the habit plane for radial δ-hydrides in a textured zirconium-alloy tube under hoop tensile stress: A theory-experiment approach”, October 2023, Materials Characterization 205:113368, DOI: 10.1016/j.matchar.2023.113368
Ehsan Entezari, Jorge Luis González Velázquez, Mohammad Ali Mohtadi Bonab, Diego Rivas López, Manuel Alejandro Beltrán Zúñiga, Reza Khatib Zadeh Davani, Jerzy A. Szpunar, “Experimental observations of nucleation and crack growth paths of hydrogen-induced cracking in pipeline steel” September 2023, Engineering Failure Analysis 154:107650, DOI: 10.1016/j.engfailanal.2023.107650
Hamid Ashrafi, Morteza Shamanian, Mohsen Sanayei, Fatemeh Farhadi, Jerzy A. Szpunar, “The Impact of Welding Heat Input on Microstructure, Micro-Texture, and Mechanical Properties of Stir Zone in Friction Stir Welded DP600 Steel”, September 2023, Materials Today Communications 37:107127, DOI: 10.1016/j.mtcomm.2023.107127
Mohammad Reza Toroghinejad, Saeed Taali, Hamed Asgari, Jerzy A. Szpunar, “The role of strain path changes on the microstructure, texture, and mechanical properties of unidirectionally and cross-accumulative roll-bonded (ARBed) aluminum”, August 2023, Journal of Materials Research and Technology 26, DOI: 10.1016/j.jmrt.2023.08.006
Mohammad Reza Toroghinejad, Saeed Taali, Hamed Asgari, Jerzy A. Szpunar, “The effects of strain path change on the microstructure, texture, and mechanical properties of accumulative roll-bonded (ARBed) AA1050 strips”, August 2023, Journal of Materials Research and Technology 26, DOI: 10.1016/j.jmrt.2023.08.008
Sandeep Yadav, Jhon Freddy Aceros Cabezas, Reza Khatib Zadeh Davani, Jerzy A. Szpunar, Jiming Zhang, “Synergistic effect of different testing environments on the hydrogen-induced mechanical degradation to establish the role of microstructural features on the failure of X70 pipeline steel”, June 2023, International Journal of Hydrogen Energy 48(12), DOI: 10.1016/j.ijhydene.2023.05.349
Linu Malakkal, Anil Prasad, Jayangani Ranasinghe, Ericmoore Jossou, Lukas Bichler, Jerzy A. Szpunar, “Enhanced thermal conductivity of spark plasma-sintered thorium dioxide-silicon carbide composite fuel pellets”, June 2023, Nuclear Engineering and Technology, Nuclear Engineering and Technology 55(10), DOI: 10.1016/j.net.2023.06.038
Reza Khatib Zadeh Davani, Mohammad Ali Mohtadi Bonab, Sandeep Yadav, Ehsan Entezari, Jhon Freddy, Aceros Cabezas, Jerzy A. Szpunar, “Citation: metals Effect of Quench Tempering on Hydrogen Embrittlement and Corrosion Behavior of X100 Pipeline Steel”, April 2023, Metals 13(5), DOI: 10.3390/met13050841
Mohammad Narimani, Esmaeil Hajjari, Mostafa Eskandari, Jerzy A. Szpunar, “Elevated temperature tensile behavior of S900 HSLA steel and its welded joints”, April 2023, Journal of Constructional Steel Research 203, DOI: 10.1016/j.jcsr.2023.107782
Tonye Alaso Jack, Jerzy A. Szpunar, “Effect of Nb-induced microstructure on pipeline steel corrosion and stress corrosion cracking performance in acidic environment”, April 2023, Corrosion Science 218:111196, DOI: 10.1016/j.corsci.2023.111196
W. Qin, A.K. Chauhan, M. Song, D. Gu, T.L. Li, W.L. Zhu, Jerzy A. Szpunar, “Microstructure criterion for the preferential locations of helium bubble precipitation in a polycrystal”, April 2023, Journal of Nuclear Materials 577(3):154332, DOI: 10.1016/j.jnucmat.2023.154332
Hamid Ashrafi, Morteza Shamanian, Mohsen Sanayei, Fatemeh Farhadi, Jerzy A. Szpunar, “EBSD Characterization of Microstructure and Micro-texture in a Friction Stir-Welded DP600 Steel”, January 2023, Acta Metallurgica Sinica (English Letters) 36(5), DOI: 10.1007/s40195-023-01521-y
Tonye Alaso Jack, Jerzy A. Szpunar, “Effect of Nb-Induced Microstructure on Pipeline Steel Corrosion and Stress Corrosion Cracking Performance in Acidic Environment”, January 2023, SSRN Electronic Journal, DOI: 10.2139/ssrn.4333689
Dylan Rose, Dylan Rose, Tonya Wolfe, Hani Henein, “Microstructural Characterization of 70 Wt Pct WC-NiBSi Deposited by PTA-AM”, November 2023, Metallurgical and Materials Transactions A, 55(5), DOI: 10.1007/s11661-023-07257-9
Quentin Champdoizeau, J. Valloton, Hani Henein, “Thermophysical Properties Measurement of Al–22.5 wt pctCu in Reduced Gravity Using the ISS-EML”, September 2023, Metallurgical and Materials Transactions A 54(11), DOI: 10.1007/s11661-023-07190-x
Dylan Rose, Tonya Wolfe, Hani Henein, “Microstructural Characterization and Wear Resistance of 60 wt.%, 70 wt.%, and 80 wt.% WC-NiCrBSi Thin Walls Deposited Using Plasma Transferred Arc Additive Manufacturing”, September 2023, JOM: the journal of the Minerals, Metals & Materials Society 76(9), DOI: 10.1007/s11837-023-06074-0
Ezz Ahmed, Hani Henein, Ahmed Jawad Qureshi, Jing Liu, “The microstructure, mechanical behaviour, and dissolvability of novel Al-Cu-Zn-Mg-based alloys”, June 2023, Canadian Metallurgical Quarterly 63(2):1-20, DOI: 10.1080/00084433.2023.2219947
Shiyu Teng, Shirin dehgahi, Hani Henein, Tonya Wolfe, Ahmed Jawad Qureshi, “Effect of surface texture, viewing angle, and surface condition on the emissivity of wire arc directed energy deposition manufactured 7075 nano treated aluminum alloy”, March 2023, The International Journal of Advanced Manufacturing Technology 126(5-6):1-15, DOI: 10.1007/s00170-023-11208-4
Saoussen Ouhiba, J.B. Wiskel, D.G. Ivey, Michael James Gaudet, A. Hamilton, Laurie Collins, Hani Henein, “The effect of non-metallic inclusion morphology on the hydrogen induced cracking (HIC) resistance of L80 steel”, March 2023, Journal of Materials Research and Technology 24, DOI: 10.1016/j.jmrt.2023.03.008, LicenseCC BY 4.0
Geoffrey Bonias, Hani Henein, Tonya B. Wolfe, “Modeling residual stresses of functionally graded deposits using the PTAAM”, May 2023, IOP Conference Series Materials Science and Engineering 1281(1):012012 DOI:10.1088/1757-899X/1281/1/012012, License CC BY 3.0
S. Ouhiba, J.B. Wiskel, D.G. Ivey, M.Gaudet, H.Henein, “The effect of non-metallic inclusion morphology on the hydrogen induced cracking (HIC) resistance of L80 steel”, March 2023, Journal of Materials Research and Technology,24, DOI:10.1016/j.jmrt.2023.03.008, License CC BY 4.0
D. M. Matson, L. Battezzati, Peter Galenko, Ch.-A. Gandin, A. K. Gangopadhyay, Hani Henein, K. F. Kelton, M. Kolbe, J. Valloton, S. C. Vogel, T. Volkmann, “Electromagnetic levitation containerless processing of metallic materials in microgravity: rapid solidification”, August 2023, npj Microgravity 9(1):65-1-14. DOI: 10.1038/s41526-023-00310-2
Mingzhang Yang, J Barry Wiskel, Douglas G Ivey, Michael Gaudet, Hani Henein, “The effect of tempering conditions on carbides in P110 casing steels”, January 2023, Materials Science and Technology” DOI:10.1080/02670836.2022.2159455, License CC BY-NC-ND 4.0
Adilson V. Rodrigues, Rafael Kakitani, Cassio Silva, Leonardo Giovanetti, Hani Henein, “Influence of Minor Additions of Be on the Eutectic Modification of an Al-33wt.%Cu Alloy Solidified under Transient Conditions”, January 2023, Metals - Open Access Metallurgy Journal 13(1):94, DOI:10.3390/met13010094, License CC BY 4.0
J. Valloton, N. Mahdi, L. Rabago, J.Chung, H. Henein, “In situ solidification of eutectic Al-33wt%Cu droplets”, January 2023, IOP Conference Series Materials Science and Engineering 1274(1):012034, DOI:10.1088/1757-899X/1274/1/012034, License CC BY 3.0
J. Valloton, S.C. Vogel, H. Henein, “Microstructural study of containerless solidification of Al-5wt%Ce alloy”, January 2023, IOP Conference Series Materials Science and Engineering 1274(1):012058, DOI:10.1088/1757-899X/1274/1/012058, License CC BY 3.0
Eslam Fayed, V. Brailovski, Mohammad Jahazi, Mamoun Medraj, “Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy”, April 2023, Canadian Metallurgical Quarterly 63(2):1-17, DOI: 10.1080/00084433.2023.2195243
Mohamed Elhadi Ibrahim, Mason Marzbali, Abdullahi Kachalla Gujba, Mamoun Medraj, “The role of hardening and roughening during the incubation period in water droplet impingement erosion of Ti–6Al–4V”, February 2023, Wear 520-521:204658, DOI: 10.1016/j.wear.2023.204658
Rizwan Ahmed Shaik, Mohammed Elhadi Ibrahim, Abdullahi Kachalla Gujba, Mamoun Medraj, Martin Pugh, “Low Strain Hardening Enables Improved Water Droplet Erosion Performance Through Deep Rolling”, January 2023, DOI: 10.2139/ssrn.4597533
Rajwinder Singh, Ashkan Arab, Alan Caceres, Roger Eybel, Mamoun Medraj, "Establishing industrial Zn‑Ni brush electroplating process without post-plating hydrogen embrittlement relief baking", Surface and Coatings Technology, Vol. 478, No. 29, 2024,130363. https://doi.org/10.1016/j.surfcoat.2023.130363
Babajide Oluwagbenga Fatile, Martin Pugh & Mamoun Medraj "Enhancing niobium-based oxides for high-performance lithium-ion batteries through hydrogenation", Journal of Solid State Electrochemistry, 2023. https://doi.org/10.1007/s10008-023-05644-1
BO Fatile, M Pugh, M Medraj, "Nickel-doped Nb18W16O93 nanowires with improved electrochemical properties for lithium-ion battery anodes", Materials Chemistry and Physics, Vol. 307, 2023, 128179
Juried Conference Proceedings (2023)
Rohit Tiwari, Bruno Girard, Chantal Labrecque, Mihaiela M. Isac, Roderick I. L. Guthrie, “CFD Predictions for Mixing Times in an Elliptical Ladle Using Single- and Dual-Plug Configurations; Processes 11, no. 6: 1665. https://doi.org/10.3390/pr11061665
Rohit Tiwari, Mihaiela M. Isac, Roderick I.L. Guthrie; “Microbubble Generation for Removal of Inclusions from Liquid Melts, and their Measurement and Size Distribution Using the LiMCA System”; Proceedings of the Conference of Metallurgists 2023, Springer, Cham (2023), Toronto, pp 297-305. https://doi.org/10.1007/978-3-031-38141-6_34
Daniel Gonzalez Morales, Mihaiela Isac, Roderick Guthrie, “CFD MODELING OF THIN SHEET PRODUCT USING THE HORIZONTAL SINGLE BELT CASTING PROCESS”, TMS 2023, San Diego, March 19-23, 2023. Light Metals 2023. Cham: Springer Nature Switzerland; 2023. p. 1022-30. https://doi.org/10.1007/978-3-031-22532-1_136 .
Gonzalez-Morales DR, Isac MM, Guthrie RIL., “Mathematical Modelling and Experimental Work on the Solidification of Strips of Calcium-Based Bulk Metallic Glass (BMG), Produced by the Horizontal Single Belt Casting (HSBC) Process”, Proceedings of the 62nd Conference of Metallurgists, COM 2023, p. 313-26. https://doi.org/10.1007/978-3-031-38141-6_36
Gonzalez-Morales DR, Isac MM, Guthrie RIL. “CFD Modeling of Thin Sheet Product Using the Horizontal Single Belt Casting Method”. In: Broek S, editor. Light Metals 2023. Cham: Springer Nature Switzerland; 2023. p. 1022-30.
Gonzalez-Morales DR, Isac MM, Guthrie RIL. The Development of the HSBC (Horizontal Single-Belt Casting) Process From Inception to Present Day. Proceedings of the 61st Conference of Metallurgists, COM 2022. Montreal, Canada: Springer International Publishing; 2023. p. 425-36. https://doi.org/10.1007/978-3-031-17425-4_56
Gonzalez-Morales DR, Isac MM, Guthrie RIL. HSBC Back-Meniscus Stability for a Double-Impingement Liquid Metal Feeding System. Proceedings of the 61st Conference of Metallurgists, COM 2022. Montreal, Canada: Springer International Publishing; 2023. p. 305-13. https://doi.org/10.1007/978-3-031-17425-4_42
Daniela Diaz, A. Bogno, Marcelino Dias, Jonas Valloton, Douglas Ivey, Hani Henein, “Effect of Ce Addition in Hypereutectic Al-Si Alloys During Rapid Solidification”, October 2023 DOI: 10.1007/978-3-031-38141-6_69 In book: Proceedings of the 62nd Conference of Metallurgists, COM 2023
Anne McDonald, Anqi Shao, Kimberley Meszaros, Ahmed Jawad Qureshi, Michel Rappaz, Tonya Wolfe, Hani Henein, “Microstructure Map of Rapidly Solidified 17-4PH Stainless Steel”, October 2023 DOI: 10.1007/978-3-031-38141-6_67 In book: Proceedings of the 62nd Conference of Metallurgists, COM 2023
Geoffrey Bonias, Hani Henein, Tonya B. Wolfe, “Modeling residual stresses of functionally graded deposits using the PTAAM”, May 2023, IOP Conference Series Materials Science and Engineering IOP Conference Series Materials Science and Engineering, 1281(1):012012 DOI: 10.1088/1757-899X/1281/1/012012
Geoffrey Bonias, Hani Henein, Tonya B. Wolfe, “Modeling residual stresses of functionally graded deposits using the PTAAM”, May 2023, IOP Conference Series Materials Science and Engineering 1281(1):012012 DOI: 10.1088/1757-899X/1281/1/012012