Amabili | Angeles | Baliga | Bergthorson | Cortelezzi | Fried | Frost | Habashi | Higgins | Hubert | Kovecses | Lee J.H.S. | Lee T. | Lessard | Mongeau | Mongrain | Mydlarski | Nadarajah | Nahon | Paidoussis | Pasini | Radziszewski | Sharf | Timofeev | Vengallatore | Zsombor-Murray |
AMABILI, M.
Journal Publications
K.N. Karagiozis, M.P. Païdoussis, M. Amabili and A.K. Misra, 2008, Journal of Sound and Vibration, Vol. 309, No 3-5, pp. 637-676. Nonlinear stability of cylindrical shells subjected to axial flow: theory and experiments.
S. Carra, M. Amabili, R. Ohayon and P.M. Hutin, 2008, Aerospace Science and Technology, Vol. 12, pp. 54-61. Active vibration control of a thin rectangular plate in air or in contact with water in presence of tonal primary disturbance.
C. Touzé, M. Amabili and O. Thomas, 2008, Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 2030-2045. Reduced-order models for large-amplitude vibrations of shells including in-plane inertia.
S. Hosseini-Hashemi, K. Khorshidi and M. Amabili, 2008, Journal of Sound and Vibration, Vol. 315, No. 1-2, pp. 318-342. Exact solution for linear buckling of rectangular Mindlin plates.
Refereed Conference Proceedings
M. Amabili, K. Karagiozis, M.P. Païdoussis, 2008, Proceedings of the 9th International Conference on Flow-Induced Vibrations – FIV2008, pp. 317-322, 30 June - 3 July, Prague, Czech Republic. Effect of geometric imperfections on shells conveying fluid.
M. Amabili and S. Carra, 2008, Proceedings of the 6th Euromech Nonlinear Dynamics Conference (ENOC) on CD-Rom, 30 June - 4 July, St. Petersburg, Russia. Large-amplitude vibrations of rectangular plates in air or coupled to free-surface liquids: theory and experiments.
M. Amabili, K. Karagiozis, M.P. Païdoussis, 2008, Proceedings of the 6th Euromech Nonlinear Dynamics Conference (ENOC) on CD-Rom, 30 June - 4 July, St. Petersburg, Russia. Effect of geometric imperfections on nonlinear stability of cylindrical shells conveying fluid.
M. Amabili, 2008, Trends in Computational Structures Technology (invited lectures presented at the 9th Int. Conference on Computational Structures Technology, Athens, Greece, 2-5 September 2008), pp. 293-316, Saxe-Coburg Publications, UK, ISBN 978-1-874672-35-7. Non-Linear Vibrations of Shells.
M. Amabili, S. Carra, 2008, Proceedings of the 9th Int. Conference on Computational Structures Technology, Athens, Greece, 2-5 September 2008, p. 131 (paper 131), Civil-
Comp Press, UK, ISBN 978-1-905088-21-8. Nonlinear vibrations of plates with fluid-structure interaction.
M. Amabili, K. Karagiozis, M.P. Païdoussis, 2008, Proceedings of the 9th Int. Conference on Computational Structures Technology, Athens, Greece, 2-5 September 2008, p. 133 (paper 133), Civil-Comp Press, UK, ISBN 978-1-905088-21-8. Nonlinear stability of shells conveying fluid flow.
M. Amabili, S. Carra, 2008, ASME International Mechanical Engineering Congress and Exposition, (IMECE2008-66271) presentation only, 31 October - 6 November, Boston, USA. Thermal effects on large-amplitude vibrations of rectangular plates.
M. Amabili, K. Karagiozis, M.P. Païdoussis, 2008, ASME International Mechanical Engineering Congress and Exposition, (IMECE2008-66268) presentation only, 31 October - 6 November, Boston, USA. Effect of geometric imperfections on nonlinear stability of circular shells conveying fluid.
ANGELES, J.
Journal Publications
Cardou, P., Pasini, J. and Angeles, J., 2008, “Lumped elastodynamic model for MEMS: formulation and validation,” IEEE/ASME J. Microelectromechanical Systems, Vol. 17, No. 4, pp. 948-961.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles, J., 2008, “Generalization of the energetic coefficient of restitution for contacts in multibody systems,” ASME J. of Computational and Nonlinear Dynamics, Vol. 3, pp. 041008-1--041008-14.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles, J., 2008, “Impacts in multibody systems: modeling and experiments,” Multibody System Dynamics, Vol. 20, pp. 163-176.
Chen, C. and Angeles, J., 2008, “A novel family of linkages for advanced motion synthesis,” Mechanism and Machine Theory, Vol. 43, pp. 882-890.
Cardou, P. and Angeles, J., 2008, “Estimating the angular velocity of a rigid body moving in the plane from tangential and centripetal acceleration measurements,” Multibody System Dynamics, Vol. 19, No. 4, pp. 383-406.
Teng, C. P., Bai, S. and Angeles, J., 2008, “Shape synthesis in mechanical design,” Acta Polytechnica, Vol. 47, No. 6, pp. 56-62.
Cardou, P. and Angeles, J., 2008, “Angular velocity estimation from the angular acceleration matrix,” ASME J. of Applied Mechanics, Vol. 75, pp. 021003-1--021003-8.
Chen, C., Bai, S. and Angeles, J., 2008, ``A comprehensive solution of the classic Burmester problem,'' Trans. Canadian Society for Mechanical Engineering, Vol. 32, No. 2, pp. 137-154.
Bai, S. P. and Angeles, J., 2008, “A unified input-output analysis of four-bar linkages,” Mechanism and Machine Theory, Vol. 43, pp. 240-251.
Chen, C., Bai, S. P. and Angeles, J., 2008, “The synthesis of dyads with one prismatic joint,” ASME J. of Mechanical Design, Vol. 130, pp. 034501-1--034501-6.
Refereed Conference Proceedings
Desrochers, S., Angeles, J. and Pasini, D., 2008, "Optimum design of a compliant uniaxial accelerometer'', Proc. of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2008, Brooklyn, New York, Aug. 3--6.
Bischof, A., Angeles, J. and Blessing, L., 2008, "The conceptual design of a perfusion reactor using a complexity measure'', Proc. of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2008, Brooklyn, New York, Aug. 3--6.
Oryschuk, P., Salerno, A., Al-Husseini, A.M. and Angeles, J., 2008, "The Real-time control of an underactuated two-wheeled mobile robot," in Takanishi, A., Nakamura, Y. and Heimann, B., (Editors), Robot Design, Dynamics, and Control, RoManSy 17, Tokyo, July 5-9, pp. 139-147.
Modarres, S. A., Kövecses, J. and Angeles, J., 2008, "Analysis experimental study of an energy-based approach to impact in mechanical systems," in Takanishi, A., Nakamura, Y. and Heimann, B., (Editors), Robot Design, Dynamics, and Control, RoManSy 17, Tokyo, July 5-9, pp. 175-181.
Ma, X. Q., Bai, S. P., Zhang, X. and Angeles, J., 2008, "The design of epicyclic transmissions based on cams and rollers'', Proc. of CSME/SCGM Forum 2008, Ottawa, Ontario, Canada, June 5--8.
Angeles, J., Khan, W. A., Caro, S. and Pasini, D., 2008, "The conceptual design of robotic architecture by means of a complexity measure'', Proc. of 3rd International Colloquium on Robotic Systems for Handling and Assembly, Braunschweig, Germany, April 28--29, pp. 7--21.
BALIGA, B.R.
Journal Publications
Oliveira, L.A., Costa, V.A.F., and Baliga, B.R., Numerical model for the prediction of dilute, three-dimensional, turbulent fluid-particle flows, using a Lagrangian approach for particle tracking and a CVFEM for the carrier phase, International Journal for Numerical Methods in Fluids, Vol. 58, pp. 473-491, 2008.
Costa, V.A.F., Oliveira, L.A., and Baliga, B.R., Implementation of the stress jump condition in a control-volume finite-element method for the simulation of laminar coupled
flows in adjacent open and porous domains, Numerical Heat Transfer, Part B: Fundamentals, Vol. 53, pp. 383-411, 2008.
Refereed Conference Proceedings
Scott, D.A. and Baliga, B.R., Experimental investigation of laminar mixed convection in a vertical pipe with slurries of a microencapsulated phase-change material in distilled water, Proc. Fifth International Conference on Transport Phenomena in Multiphase Systems (HEAT 2008), Vol. 2, pp. 189-196, Bialystok, Poland, June 30 – July 3, 2008.
Jesuthasan, N., Atabaki, N., and Baliga, B.R., Modeling of multiphase thermofluid phenomena in segmented network simulations of loop heat pipes, Proc. Fifth International Conference on Transport Phenomena in Multiphase Systems (HEAT 2008), Vol. 2, pp. 335-342, Bialystok, Poland, June 30 – July 3, 2008.
Jesuthasan, N. and Baliga, B.R., A numerical method for three-dimensional parabolic flow and heat transfer in straight ducts of irregular-shaped cross-section, Proc. Fourth International (ICHMT) Symposium on Advances in Computational Heat Transfer (CHT-08), Paper # 383, pp. 1-23, Marrakech, Morocco, May 11-16, 2008.
BERGTHORSON, J.
Journal Publications
AM Bonanos, JM Bergthorson, & PE Dimotakis, 2008. Mixing measurements in a supersonic expansion-ramp combustor. Flow, Turbulence and Combustion, 80(4):489-506.
CORTELEZZI, L.
Journal Publications
L. Cortelezzi, A Adorver and M. Giona, "Feasibility, efficiency and transportability of short-horizon optimal mixing protocols", Journal of Fluid Mechanics, vol. 597, pp. 199-231, 2008.
N. Tilton and L. Cortelezzi, "Linear stability analysis of pressure-driven flows in channels with porous walls", Journal of Fluid Mechanics, vol. 604, pp. 411-445, 2008.
FRIED, E.
Journal Publications
X. Chen & E. Fried, The influence of the dispersive and dissipative scales α and β on the energy spectrum of the Navier–Stokes-αβ model for turbulent flow, Physical Review E 78 (2008) 046317.
E. Fried & M. E. Gurtin, A continuum mechanical framework for turbulence giving a generalized Navier–Stokes-α equation with complete boundary conditions, Theoretical and Computational Fluid Dynamics 22 (2008) 433–470.
E. Fried, Sharp-interface nematic-isotropic phase transformations with flow, Archive for Rational Mechanics and Analysis 190 (2008) 227–265.
O. E. Shklyaev & E. Fried, Interaction between a disclination and a uniaxial–isotropic phase interface in a nematic liquid-crystal, Journal of Colloid and Interface Science 317 (2008) 298–313.
E. Fried, Review of: R. Abeyaratne and J.K. Knowles: Evolution of Phase Transitions, A Continuum Theory, Theoretical and Computational Fluid Dynamics 22 (2008) 151–153.
FROST, D.L.
Journal Publications
Brandstadt K., Frost, D.L., Kozinski, J.A., “Preignition characteristics of nano- and micrometer-scale aluminum particles in Al–CO2 oxidation systems,” Proceedings of the Combustion Institute, 32, 1913–1919, 2008.
Refereed Conference Proceedings
Frost, D.L., Cairns, M., Goroshin, S., Leadbetter, J., Ripley, R., and Zhang, F., "Reflected heterogeneous blast," Proc. 20th International Symposium on Military Aspects of Blast and Shock, Aug. 31 - Sept. 5, 2008, Oslo, Norway.
HABASHI, W.G.
Journal Publications
C.N. Aliaga, W.G. Habashi, M.S. Aubé, G.S. Baruzzi and S. Nadarajah “A Third-generation In-flight Icing Code: FENSAP-ICE-Unsteady”, SAE Transactions, Journal of Aerospace, Vol. 116, pp. 697-703, 2008.
H. Wang, P. Tran, W.G. Habashi, Y. Chen, M. Zhang and L. Feng, “Anti-Icing Simulation in Wet Air of a Piccolo System using FENSAP-ICE”, SAE Transactions, Journal of Aerospace, Vol. 116, pp. 715-723, 2008.
Refereed Conference Proceedings
W. Habashi, Keynote Address, “Advances in Simulation of In-flight icing”, 22nd Conference of the Japanese Society of Fluid Mechanics, Olympic Center, Tokyo, December 18, 2008.
C.N. Aliaga, W.G. Habashi, S. Nadarajah, M. Aubé and G.S. Baruzzi, “FENSAP-ICE Unsteady: A Multiphase Approach to In-Flight Icing”, 16th Conference of the CFD Society of Canada, University of Saskatchewan, June 2008.
G. Croce, E. de Candido, W.G. Habashi and M. Aubé, “Numerical Simulation of Ice Roughness Growth”, Proceedings 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), June 2008, Venice, Italy.
W.G. Habashi, M. Aubé, G.S. Baruzzi and C. Aliaga, “Advances in FENSAP-ICE for Simulation of Aircraft, Rotorcraft, UAVs and Jet Engine In-flight Icing: A Frontier of CFD”, Proceedings 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), June 2008, Venice, Italy.
HIGGINS, A.
Refereed Conference Proceedings
Tang, F.D., Goroshin, S., Higgins, A.J., and Lee, J.H.S., “Flame propagation and quenching in iron dust clouds,” 32nd International Symposium on Combustion, Montreal, Quebec, August 3-8, 2008.
J. Verreault, P. Batchelor, and A.J. Higgins, "One-dimensional chemical kinetic calculations of oblique shock-induced combustion and detonation," Combustion Institute Canadian Section Spring Technical Meeting,Toronto, May 11-14, 2008.
HUBERT, P.
Journal Publications
M. Dubé, P. Hubert, J. Gallet, D. Stavrov, H. Bersee and A. Yousefpour, “Fatigue Performance Characterization of Resistance-welded Thermoplastic Composites”, Composites Science and Technology, 2008, 68, 7-8, 1759-1765.
G. Palardy, P. Hubert, M. Haider and L. Lessard, “Optimization of RTM Processing Parameters for Class A Surface Finish”, Composites Part B, 2008, 39, 7-8, 1280-1286.
M. Dubé, P. Hubert, A. Yousefpour and J. Denault, “Current Leakage Prevention in Resistance Welding of Carbon Fibre Reinforced Thermoplastics”, Composites Science and Technology, 2008, 68, 6, 1579-1587.
Refereed Conference Proceedings
V. Feret, I. Paris and P. Hubert, “Damage Mapping of Fatigued Skin Stringer Specimens in Three Dimensions”, SAMPE Fall Technical Conference 2008, Memphis, TN, September 8-11 2008.
M. A. Bashir and P. Hubert, “Effect of Nanoclay Dispersion on Processing of Polyester Nanocomposite”, SAMPE Fall Technical Conference 2008, Memphis, TN, September 8-11 2008.
L. Khoun, T. Centea and P. Hubert, “Experimental and Numerical Analysis of the Dimensional Stability of an RTM Carbon Epoxy Aerospace Structure”, 9th International Conference on Flow Processes in Composite Materials, Montreal, Canada, July 8-10 2008.
V. Mirjalili, B. Ashrafi, K. Adhikari and P. Hubert, “Effect of the Single Walled Carbon Nanotube Content on Resin Flow”, 9th International Conference on Flow Processes in Composite Materials, Montreal, Canada, July 8-10 2008.
P. Hubert, L. Khoun, S. Roy, J. Laliberté, L. Lessard, F. Cloutier, F. Trochu, M.-A. Octeau, M. Hojjati, S. Héroux, C. Marsden, “Integrated Design and Manufacturing of a Composite Helicopter Horizontal Stabilizer Slat”, 4th International Symposium on Manufacturing Technology for Composite Aircraft Structures, Braunschweig, Germany, May 7-8 2008.
KÖVECSES, J.
Journal Publications
Kövecses, J.: “Dynamics of Mechanical Systems and the Generalized Free-Body Diagram, Part I: General Formulation”. ASME Journal of Applied Mechanics, Vol. 75, 061012 pp. 1-12, 2008.
Kövecses, J.: “Dynamics of Mechanical Systems and the Generalized Free-Body Diagram, Part II: Imposition of Constraints”. ASME Journal of Applied Mechanics, Vol. 75, 061013 pp. 1-8, 2008.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles J.: “Impacts in Multibody Systems: Modelling and Experiments”. Multibody System Dynamics, Vol. 20, pp. 163-176, 2008.
Meshreki M., Kövecses, J., Attia, H. and Tounsi, N.: “Dynamics Modeling and Analysis of Thin-Walled Aerospace Structures for Fixture Design in Multi-Axis Milling”. ASME Journal of Manufacturing Science and Engineering, Vol. 130, 031011 pp. 1-12, June 2008.
J5. Kovács, L.L., Kövecses, J. and Stépán, G.: “Analysis of Effects of Differential Gain on Dynamic Stability of Digital Force Control”. International Journal of Non-linear Mechanics, Vol. 43, pp. 514-520, 2008.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles J.: “Generalization of the Energetic Coefficient of Restitution for Contacts in Multibody Systems”. ASME Journal of Computational and Nonlinear Dynamics, Vol. 3, 041008 pp. 1-14, 2008.
Refereed Conference Proceedings
C1. Font, J.M. and Kövecses, J.: “Effects of Mass Distribution and Configuration on the Energetic Losses at Impacts of Bipedal Walking Systems.” 2008 ASME International Mechanical Engineering Congress and Exposition, Paper #: IMECE2008-66684, Oct. 31-Nov. 6, 2008, Boston, Massachusetts.
Font, J.M. and Kövecses, J.: “Dynamics of Heel Strike in Bipedal Systems with Circular Feet.” Proc. 2nd European Conference on Mechanism Science (M. Ceccarelli, Ed.), pp. 465-472, Cassino, Italy, September 17-20, 2008 [Proceedings published by Springer, ISBN: 978-1-4020-8914-5].
Jin, M., Kövecses, J. and Lange, C.: “Structural Parameter Identification of a Robotic System Using Modal Analysis”. 4th Asian Conference on Multibody Dynamics, ACMD 2008, Seogwipo-City, Jeju Island, South Korea, August 20-23, 2008.
Ebrahimi, S. and Kövecses, J.: “Parameter Normalization in Multibody Dynamics”. 2008 ASME Int. Design Engineering Technical Conferences, 32nd Annual Mechanisms and Robotics Conference, Paper #:DETC2008-49793, New York City, N.Y., August 3-6, 2008.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles, J.: “Analysis and Experimental Study of an Energy-Based Approach to Impact in Mechanical Systems”. 17th CISM-IFToMM Symp. on Robot Design, Dynamics, and Control ROMANSY 17, pp. 175-181, Tokyo, Japan, July 5-9, 2008.
Ebrahimi, S. and Kövecses, J.: “Model Normalization for the Analysis of Inertial Parameters in Multibody Dynamics”. 8th World Congress on Computational Mechanics, Venice, Italy, June 30-July 5, 2008.
Toufic, A., Rajagopalan, S., Cecere, R., Kövecses, J. and Angeles, J.: “A Concept for a Novel Procedure for Mitral Valve Repair by Percutaneous Annuloplasty”. 3rd ASME Frontiers in Biomedical Devices Conference, BioMed2008, Paper #: BioMed2009-38085, Irvine, California, June 18-20, 2008.
Font, J.M. and Kövecses, J.: “Modelling Dynamic Walking Bipeds as Variable Topology Mechanical Systems”. 4th International Conference on Dynamic Walking, Delft, The Netherlands, May 26-29, 2008.
LEE, H.T.
Journal Publications
Lee, T. and Nikolic, V., (2008) "Effects of a movable tip strake on wake vortex structure," Journal of Aircraft, vol. 45, no. 4, pp. 1305-1314.
Gerontakos, P. and Lee, T., (2008) "PIV investigation of flow over unsteady airfoil with trailing-edge strip," Experiments in Fluids, vol. 44, no. 4, pp. 539-556.
Lee, T. and Pereira, J., (2008) "Tip vortex control via a tab deflecting at higher harmonic frequencies," AIAA Journal, vol. 46, no. 6, pp. 1342-1350.
Gerontakos, P. and Lee, T., (2008) "PIV study of flow around unsteady airfoil with dynamic trailing-edge flap deflection," Experiments in Fluids, vol. 45, no. 6, pp. 955-972.
Lee, T. and L.S. Ko, (2008) "PIV investigation of the flowfield behind porous trailing-edge flaps," Experiments in Fluids, published on-line (December 15): DOI 10.1007/s00348-008-0606-1, pp. 1005-1019.
LEE, J.H.S.
Books
The Detonation Phenomenon (June 2008) Cambridge University Press.
Journal Publications
Ng, H.D., Chao, J., Yatsufusa, T. and Lee, J.H.S. (2008) Measurement and chemical kinetic prediction of detonation sensitivity and cellular structure characteristics in dimethyl ether-oxygen mixtures. Fuel, Vol. 88 (1), pp. 124-131.
Ng, H.D. and Lee, J.H.S. (2008) Comments on explosion problems for hydrogen safety. Journal of Loss Prevention in the Process Industries, Special Issue on Hydrogen Safety (invited paper), Vol. 21 (2), pp. 136-146.
Refereed Conference Proceedings
Chao, J., Ng, H.D. and Lee, J.H.S. (2008) Numerical study of detonability limits. Abstract Proceedings of the SIAM 12th International Conference on Numerical Combustion, in Monterrey, USA.
LESSARD, L.
Journal Publications
Palardy, Genevieve, Hubert, Pascal, Haider, Mohsan and Lessard, Larry, “Optimization of RTM Processing Parameters for Class A Surface Finish,” Composites Part B, No. 39, 2008, pp. 1280-1286.
Taheri-Behrooz, Fathollah, Shokrieh, Mahmood, and Lessard, Larry, “Residual Stiffness in Cross-Ply Laminates Subjected to Cyclic Loading,” Journal of Composite Structures, Vol. 85, No. 3, pp. 205-212, 2008.
Ghiasi, Hossein, Pasini, Damiano, and Lessard, Larry, “Constrained Globalized Nelder-Mead Method for Simultaneous Structural and Manufacturing Optimization of a Composite Bracket”, J. of Composite Materials, Vol. 42, No. 7, pp 717-736, 2008.
Refereed Conference Proceedings
Ghiasi, H., Pasini, D., Lessard, Larry and Thouin, M., “Structural and Manufacturing Design of a Carbon Fiber Bicycle Stem” 1st International Conference on Composite: Characterization, Fabrication and Application, CCFA-1, Kish Island, Iran, Dec 15-18, 2008.
Ghiasi, H., Pasini, D. and Lessard, Larry, “Layer Separation For Optimization of Composite Laminates”, Proceedings of the 34th International Design Engineering Technical Conference and Computer Information in Engineering, IDETC/CIE August 3-6, 2008, New York, New York, USA.
Yamanaka, T. and Lessard, Larry, “A new strong discontinuity modeling element without additional degrees of freedom for delamination propagation simulations”, 8th World Congress on Computational Mechanics (WCCM), Venice, Italy, June 30-July 5, 2008.
Roy, S. and Lessard, Larry, “Mechanical Failure of a Composite Helicopter Structure Under Static Loading”, ECCM 13th International Conference on Composite Materials, Stockholm, Sweden, June 2-5, 2008.
Ghiasi, M.H., Pasini, D., and Lessard, Larry, “Simultaneous Structural and Manufacturing Optimization of Composite Parts using Normal Constraint Method”, ECCM-13, 13th International Conference on Composite Materials, Stockholm, Sweden, June 2-5, 2008.
Hubert, P., Khoun, L., Roy, S., Laliberte, J., Lessard, L., Cloutier, F., Trochu, F., Octeau, M.A., Hojjati, M. and Heroux, S., “Integrated Design and Manufacturing of a Composite Helicopter Horizontal Stabilizer Slat” ISCM 2008 Conference Braunschweig, Germany, May 7-8, 2008.
MISRA, A.K.
Journal Publications
Misra, A.K. (2008). Dynamics and control of tethered satellite systems. Acta Astronautica, Volume 63, pp. 1169-1177.
Wong, B. and Misra, A.K. (2008). Planar dynamics of variable length multi-tethered spacecraft near collinear Lagrangian points. Acta Astronautica, Vol. 63, pp. 1178-1187.
Wong, B., Patil, R. and Misra, A.K. (2008). Attitude dynamics of rigid bodies in the vicinity of Lagrangian points. Journal of Guidance, Control, and Dynamics, Vol. 31, pp. 252-256.
Pizarro-Chong, A. and Misra, A.K. (2008). Dynamics of multi-tethered satellite formations containing a parent body. Acta Astronautica, Vol. 63, pp. 1188-1202.
Karagiozis, K.N., Paidoussis, M.P., Amabili, M. and Misra, A.K. (2008). Nonlinear stability of cylindrical shells subjected to axial flow: Theory and experiments. Journal of Sound and Vibration, Vol. 309, pp. 637-676.
Refereed Conference Proceedings
Blake, C. and Misra, A.K. Dynamics and control of satellite formations using a quasi-rigid body formulation. AAS/AIAA Space Flight Mechanics Meeting, Galveston, Texas, January 2008, Paper No. AAS-08-145.
Blake, C. and Misra, A.K. Constrained reorientation of satellite formations using a quasi-rigid body formulation. 5th IAF Workshop on Constellations and Formation Flying, Evpatoria, Ukraine, July 2008.
Woo, P. and Misra, A.K. Mechanics of very long tethered systems. AIAA/AAS Astrodynamics Specialist Conference, Honolulu, Hawaii, August 2008, Paper No. AIAA-2008-7378.
Woo, P. and Misra, A.K. Dynamics of a partial space elevator with multiple climbers. 59th International Astronautical Congress, Glasgow, Scotland, September-October 2008, Paper No. IAC-08-D4.2.2.
Piersigilli, P., Sharf, I. and Misra, A.K. Reactionless capture of a satellite by a two degrees of freedom manipulator. 59th International Astronautical Congress, Glasgow, Scotland, September-October 2008, Paper No. IAC-08-C1.1.6.
MONGEAU, L.
Journal Publications
Spencer, M., Siegmund, T., and Mongeau, L., “Determination of contact pressure and superior surface strains and stresses using a synthetic larynx model and digital image correlation,” J. Acoust. Soc. Am., Vol. 123, No. 2, pp. 1089-1113, 2008.
Park, J.B., and Mongeau, L., “Experimental investigation of the influence of a posterior gap on glottal flow and sound,” J. Acoust. Soc. Am., Vol. 124, No. 2, pp. 1171-1179, 2008.
Park, J., and Mongeau, L., “Vibration and Sound Radiation of Viscoelastically Supported Midlin Plates,” J. Sound Vib., Vol. 318, pp. 1230-1249, 2008.
Cook, D.D., Nauman, E., and Mongeau, L., “Reducing the number of vocal fold mechanical tissue properties: Evaluation of the incompressibility and planar displacement assumptions,” J. Acoust. Soc. Am., Vol. 124, No. 6, pp. 3888-3896, 2008.
Refereed Conference Proceedings
Park, J.B., Mejia, P.Y., and Mongeau, L., “Spatial Coherence of the Surface Pressure Fluctuations Downsteam of a Fence with Notches,” AIAA/CEAS Paper AIAA-2008-
2803, 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference), Vancouver, Canada, May 7-9, 2008.
Najafiyazdi, A., Mongeau, L., and Lew, P. “On the Accuracy of Multi-Block Lattice Boltzmann Methods for Aeroacoustic Simulations,” AIAA/CEAS Paper AIAA-2008-2972, 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference), Vancouver, Canada, May 7-9, 2008.
Wang, J., Paidoussis, M., and Mongeau, L., “A method for noise reduction in hydraulic lines”, Proceedings of NCAD2008-730888 NoiseCon2008 - ASME, Dearborn, Michigan, USA, July 28-30, 2008.
MONGRAIN, R.
Journal Publications
Mejia J., Mongrain R., Bilal R., Leask R., Bertrand O.F., Evaluation of the effect of stent strut profile on shear stress distribution, Biomedical Engineering Online 8:8doi:10.1186/1475-925X-8-8
Bertrand OF, Arsenault J., Mongrain R., Operator vs patient radiation exposure in transradial and transfemoral coronary interventions, Eur Heart J. 29(20): 2577-2578, 2008
Brunette J, Mongrain R, Laurier J, Galaz R, Tardif JC., 3D flow study in a mildly stenotic coronary artery phantom using a whole volume PIV method, Med Eng Phys. 30(9): 1193-1200, 2008
Brunette J, Mongrain R, Rodés-Cabau J, Larose E, Leask R, Bertrand OF., Comparative rheology of low- and iso-osmolarity contrast agents at different temperatures, Catheter Cardiovasc Interv. 71(1):78-83, 2008
Refereed Conference Proceedings
Meija J., Mongrain R., Rodes J., Bertrand O., The significance of flow unsteadyness on near-wall flow of a stented artery, ECIFBME Proc. 22: 1947-1950, 2008
Rouleau L. Farcas M.A., Copland I., Tardif J.-C., Mongrain R., Leask R.L., In vitro assessment of endothelial cell inflammatory response and leukocyte adhesive properties, Biomedical Engineering Annual Meeting (BMES 2008), St-Louis, MI, USA, 2008
Tremblay D., Cartier R., Leduc L., Butany J., Mongrain R., Leask RL., Circumferential variations in passive and active mechanical properties of healthy and aneurysmal ascending aorta, ECIFBME Proc. 22: 1899-1902, 2008
Mongrain R., Faik I., Ruzzeh B., Galaz R., Bertrand O., Optimization of drug eluting stents using numerical simulations, Proceedings of the Endovascular Biomechanics and Restenosis Symposium, Marseille, 2008
Chu B., Mongrain R., Tardif J.-C., Cartier R., Characterization of aneurismal aortic tissue toughness, 16th International Conference on Mechanics in Medicine and Biology, Pittsburgh, USA, 2008
Rouleau L., Farcas M.A., Copland I., Tardif J.-C., Mongrain R., Leask R., Morphological and functional flow-induced response of endothelial cells and adhesive properties of leukocytes in 3D stenotic models, ECIFBME Proc. 22: 2015-2018, 2008
Galaz R., Mongrain R., Leask R., Tardif J.-C., Computational fluid-structure interaction studies to assess the mechanical fatigue vulnerability of patient specific coronary plaques, Proceedings of the Endocoronary Biomechanics and Restenosis Symposium, Marseille, 2008
Chu B., Mongrain R., Tardif J.-C., Caractérisation de la résistance à la rupture des tissus vasculaires, 76eme Congres ACFAS, Symposium sur Biomatériaux pour le diagnostic et le traitement des maladies cardiovasculaires, Quebec, 2008
Tremblay D., Cartier R., Leduc L., Zigras T., Bouchot O., Meadley S., Vaillancourt B., Wiseman P., Mongrain R., Leask R., Caractérisation des propriétés mécaniques des tissus synthétiques et biologiques associés aux reconstructions de l’aorte ascendante: fonctions et structure, 76eme Congres ACFAS, Symposium sur Biomatériaux pour le diagnostic et le traitement des maladies cardiovasculaires, Quebec, 2008
Mejia J., Mongrain R., Bertrand O., Rodes J., A numerical and experimental study of blood disturbances in a stented arterial segments: steady vs pulsatile inlet conditions, 16th International Conference on Mechanics in Medicine and Biology, Pittsburgh, USA, 2008
Mejia J., Mongrain R., Drapeau G., Rodes J., Bertrand O., A numerical and experimental study of blood disturbances in a stented arterial segment : Flat vs cylindrical mock-ups, Proceedings of the ASME Bioengineering Conference, Marco Island, USA, 2008
Mongrain R., Leask R., Rodes J., Bertrand O., Développement d’un stent pédiatrique, 76eme Congres ACFAS, Symposium sur Biomatériaux pour le diagnostic et le traitement des maladies cardiovasculaires, Quebec, 2008
Chu B., Mongrain R., Cartier R., Characterization of soft tissue fracture toughness for the study of aortic aneurysm rupture, Proc. Of the ASME Bioengineering Conference (SBC 2008), Florida, USA, 2008
MYDLARSKI, L.
Journal Publications
Lavertu, T.M., Mydlarski, L. and Gaskin, S.J., 2008. Differential diffusion of high-Schmidt-number passive scalars in a turbulent jet. Journal of Fluid Mechanics, 612, pp. 439-475.
Costa-Patry, E. and Mydlarski, L., 2008. Interference of thermal fields emitted from concentrated sources in turbulent channel flow. Journal of Fluid Mechanics, 609, pp. 349-375.
Refereed Conference Proceedings
Khorsandi, B., Gaskin, S.J. and Mydlarski, L., 2008. The effect of background turbulence on the entrainment into an axisymmetric turbulent jet. Proceedings of the Second International Symposium on Shallow Flows. p. 1-6.
Lepore, J. and Mydlarski L., 2008. Dependence of higher-order passive-scalar structure functions on the scalar-field initial conditions. Bulletin of the American Physical Society, Volume 53, No. 15, p. 225.
NADARAJAH, S.
Journal Publications
Kachra, F and Nadarajah, S, “Aeroelastic Solutions Using the Non-Linear Frequency Domain Method”, AIAA Journal, Vol .46, No.9, September 2008.
Aliaga, C; Aube, M; Baruzzi, G; Habashi, W, and Nadarajah, S, “A Third-generation In-flight Icing Code: FENSAP-ICE- Unsteady”, 2008 SAE Transactions Journal of Aerospace.
Nadarajah, S, and Tatossian, C, “Multi-Objective Aerodynamic Shape Optimization for Unsteady Viscous Flows”, Journal of Optimization and Engineering, Springer.
Refereed Conference Proceedings
Mohamed, K; Nadarajah S, and Paraschivoiu, M, “Krylov Recycling Techniques for Unsteady Simulations of Turbulent Aerodynamic Flows”, 26th International Congress of the Aeronautical Sciences, September 2008, Anchorage, Alaska.
Nadarajah, S, Tatossian, C, “Adjoint-Based Aerodynamic Shape Optimization of Rotorcraft Blades”, AIAA 2008-6730, 26th AIAA Applied Aerodynamics Conference, August 2008, Honolulu, Hawaii.
Cagnone, JS and Nadarajah, S, “An NLFD-Spectral Difference Scheme for Unsteady Flows”, 5th International Conference on CFD, July 2008, Seoul, Korea.
Aliaga, C; Aube, M; Baruzzi, G; Habashi, W, and Nadarajah, S, “FENSAP-ICE-Unsteady: Rime and Glaze Icing Prediction”, 16th Annual Conference of the CFD Society of Canada, June 2008, Saskatoon, SA.
Mousavi, A and Nadarajah, S, “Shape Optimization of Turbomachinery Cascades via Control Theory”, 16th Annual Conference of the CFD Society of Canada, June 2008, Saskatoon, SA.
Tatossian, C and Nadarajah, S, “Aerodynamic Shape Optimization of Hovering Rotor Blades Using a NLFD Approach”, AIAA 2008-0322, 46th Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2008.
NAHON, M.
Journal Publications
J. Carretero, M. Nahon and R. Podhorodeski, 2008, ‘Comment on “Kinematics of a New High-Precision Three-Degree-of-Freedom Parallel Manipulator” by F. Tahmasebi’, ASME Journal of Mechanical Design, Vol. 130, No. 3, (1 page).
H. Taghirad and M. Nahon, 2008, ‘Kinematic Analysis of a Macro-Micro Redundantly Actuated Parallel Manipulator’, Advanced Robotics, Vol. 22, No. 6, pp. 657-687.
H. Taghirad and M. Nahon, 2008, ‘Dynamic Analysis of a Macro-Micro Redundantly Actuated Parallel Manipulator’, Advanced Robotics, Vol. 22, No. 9, pp. 949-981.
Refereed Conference Proceedings
N. Dhanji, E. Dupuis and M. Nahon, ‘Comparative Study of Aerial Platforms for Mars Exploration’, CASI ASTRO 2008 Conference, Montreal, April 28-May 1, 2008.
C. Lambert and M. Nahon, ‘An Aerostat Positioning System with Cable Control’, 17th IFAC World Congress 2008, Seoul, July 6-11, 2008.
M. Masciola and M. Nahon, ‘Modeling and Simulation of a Tension Leg Platform’, The 18th International Offshore and Polar Engineering Conference (ISOPE-2008), Vancouver, July 6-11, 2008.
N. Plamondon and M. Nahon, ‘Trajectory Tracking Controller for an Underwater Hexapod Vehicle’, Oceans’08, Quebec City, Sept. 15-28, 2008.
O. Chiu, G. Dudek, J.-P. Lobos, A.Mills, M. Nahon, P.Giguère, Y. Girdhar, N. Plamondon, C. Prahacs, I. Rekleitis, and J. Sattar, ‘Enabling Autonomous Capabilities in Underwater Robotics’, International Conference on Intelligent Robots and Systems (IROS08), Nice, France, Sept. 22-26, 2008.
O. Chiu and M. Nahon, ‘Stability and Control of a Biomimetic Underwater Vehicle’, ICR’08, The 2nd Israeli Conference on Robotics, Herzliah, Israel, Nov. 19-20, 2008.
PAÏDOUSSIS, M.P.P.
Journal papers
K.N. Karagiozis, M.P. Païdoussis, M. Amabili & A.K. Misra, “Nonlinear stability of cylindrical shells subjected to axial flow: Theory and Experiments”, Journal of Sound and Vibration, 2008, 309, 637-676.
Y. Modarres-Sadeghi, M.P. Païdoussis & C. Semler, “Three-dimensional oscillations of a cantilever pipe conveying fluid”, International Journal of Non-Linear Mechanics, 2008, 43, 18-25.
M.P. Païdoussis, “The canonical problem of the fluid-conveying pipe and radiation of the knowledge gained to other dynamics problems in Applied Mechanics”, Journal of Sound and Vibration, 2008, 310, 462-492.
L. Tang & M.P. Païdoussis, “The influence of the wake on the stability of cantilevered flexible plates in axial flow”, Journal of Sound and Vibration, 2008, 310, 512-526.
Y. Modarres-Sadeghi, M.P. Païdoussis, C. Semler & E. Grinevich, “Experiments on vertical slender flexible cylinders clamped at both ends and subjected to axial flow”, Philosophical Transactions of the Royal Society A, 2008, 366, 1275-1296.
M.P. Païdoussis, T.P. Luu & S. Prabhakar, “Dynamics of a long tubular cantilever conveying fluid downwards, which then flows upwards around the cantilever as a confined annular flow”, Journal of Fluids and Structures, 2008, 24, 111-128.
Y. Sakuma, M.P. Païdoussis, S.J. Price & M. Suzuki, Aerodynamic forces acting on and lateral translational and rotational motions of intermediate cars travelling in a tunnel”, Journal of System Design and Dynamics, 2008, 2, 240-250.
Y. Sakuma, M.P. Païdoussis & S.J. Price, “Dynamics of trains and train-like articulated systems travelling in confined fluid — Part 1: Modelling and basic dynamics”, Journal of Fluids and Structures, 2008, 24, 932-953.
Y. Sakuma, M.P. Païdoussis & S.J. Price, “Dynamics of trains and train-like articulated systems travelling in confined fluid — Part 2: Wave propagation and flow-excited vibration”, Journal of Fluids and Structures, 2008, 24, 954-976.
Refereed Conference Papers
M.P. Païdoussis, “Dynamics of cantilevers subjected to internal and/or external axial flow: New developments and insights”, Plenary Lecture, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 31 Jul 2008, pp. 9-20. Prague: Institute of Thermomechanics, Academy of Sciences of the Czech Republic.
M. Amabili, K. Karagiozis & M.P. Païdoussis, “Effect of geometric imperfections on nonlinear stability of cylindrical shells conveying fluid”, St. Petersburg, Russia, Jun-Jul 2008, Proceedings 6th Euromech Nonlinear Dynamics Conference (ENOC), CD-Rom.
J. Wang, M. Païdoussis & Luc Mongeau, “A method for noise reduction in hydraulic lines”, Proceedings 30th ASME Annual Conference of Noise Control and Acoustics Division, NoiseCon 2008, Dearborn, MI, 28-31 July 2008, Paper NCAD 2008-73088, ISBN 0791 838307, CD-Rom. ASME.
M.P. Païdoussis, “Dynamics of cylinders, cylindrical shells and plates interacting with axial flow: A review and some new developments”, Plenary Lecture, Proceedings of the 2nd Symposium on the Mechanics of Slender Structures (MoSS 2008), Baltimore, MD, USA, 23-25 July 2008, 29pp. UMBC, IOP (Institute of Physics) & ASME.
M. Amabili, K. Karagiozis & M.P. Païdoussis, “Nonlinear stability of shells conveying fluid flow”, Proceedings of 9th Int'l Conference on Computational Structures Technology, (eds B.H.V. Topping & M. Papadrakakis), Athens, Greece, 2-5 Sep 2008, Paper 133, ISBN 978-1-905088-22-5 CD-Rom, Civil Comp Press, Stirlingshire, Scotland.
D.B. Giacobbi, C. Semler & M.P. Païdoussis, “Numerical fluid-structure interaction study of a cantilevered pipe discharging or aspirating fluid via a Computational Fluid Dynamics and Finite Element Analysis model”, Proceedings 6th Int'l Conference on Engineering Computational Technology (eds M. Papadrakakis & B.H.V. Topping), Athens, Greece, 2-5 Sep 2008, Paper 48, ISBN 978-1-905088-25-6 CD-Rom, Civil Comp Press, Stirlingshire, Scotland.
M. Amabili, K. Karagiozis & M.P. Païdoussis, “Effect of geometric imperfections of shells conveying fluid”, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 3 Jul 2008, pp. 317-322.
Z. del Prado, P.B. Gonçalves & M.P. Païdoussis, “The influence of imperfections on the nonlinear vibrations of cylindrical shells subjected to internal flowing fluid and combined loads”, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 3 Jul 2008, pp. 333-338.
K. Karagiozis, M.P. Païdoussis & A.K. Misra, “Nonlinear fluid-structure interaction of clamped shells”, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 3 Jul 2008, pp. 369-374.
Y. Modarres-Sadeghi & M.P. Païdoussis, “Three-dimensional and chaotic oscillations of long pipes conveying fluid in the presence of an end-mass”, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 3 Jul 2008, pp. 381-386.
L. Tang, M.P. Païdoussis & J. Jiang, “Dynamics of variants of two-dimensional cantilevered thin flexible plates in axial flow”, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 3 Jul 2008, pp. 393-398.
L. Tang, M.P. Païdoussis & J. Jiang, “Dynamics of two-dimensional cantilevered thin flexible plates in axial flow: Energy transfer and the design of a flutter-mill”, Proceedings 9th Int'l Conference on Flow-Induced Vibration (FIV2008), Prague, Czech Republic, 30 Jun - 3 Jul 2008, pp. 399-404.
M. Amabili & M.P. Païdoussis, “Chaotic vibrations of circular cylindrical shells: Galerkin versus reduced-order models”, Invited General Lecture. Book of Abstracts of
the Chaotic Modeling and Simulation International Conference (Chaos 2009), Chania, Greece, 1-5 June 2009, p. 2.
M. Amabili, K. Karagiozis & M.P. Païdoussis, “Chaotic vibrations of circular cylindrical shells conveying flowing fluid”, Book of Abstracts of the Chaotic Modeling and Simulation International Conference (Chaos 2009), Chania, Greece, 1-5 June 2009, p. 3.
PASINI, D.
Journal Publications
Ghiasi, H., Pasini, D., Lessard, L, "Constrained Globalized Nelder-Mead Method for Simultaneous Structural and Manufacturing Optimization of a Composite Bracket", Journal of Composite Materials, Vol. 42 (7), pp 717-736, 2008.
Pasini D., On the Biological Shape of the Polygonaceae Rheum Rhabarbarum Petiole, International Journal of Design & Nature and Ecodynamics, Vol. 3 (1), pp 1-26, 2008.
Cardou P., Pasini D., J. Angeles, Lumped Elastodynamic Model for MEMS: Formulation and Validation", Journal of Microelectromechanical Systems, Vol. 17 (4), pp 948-961, 2008.
Refereed Conference Proceedings
Ghiasi H., Lessard L., Pasini D., Thouin M., Optimum Design of a Carbon Fiber Bicycle Stem for Manufacturing and Structural Response, 1st International Conference on Composites: Characterization, Fabrication, and Application, Kish-Iran, December 15-18, 2008.
Neurohr T., Pasini D., The Sculptures of Naum Gabo as Optimum Structures, ICDHS 2008 OSAKA, Japan, October 24-27, 2008.
Elsayed M., Pasini D., Multi-Scale Model of the Effective Properties of Isotropic Micro-Truss Lattice Material 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, 10–12 September 2008
Desrochers S., Angeles J., Pasini D., Optimum Design of a Compliant Uniaxial Accelerometer, Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2008, Brooklyn, New York, USA, August 3-6, 2008
Ghiasi H., Pasini D., Lessard L., Layer Separation for Optimization of Composite Laminates, Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2008, Brooklyn, New York, USA, August 3-6, 2008
Pasini, D. “Modelling the micro- and macro-structure efficiencies of a compliant petiole beam”, 4th international Conference on Design and Nature, Algarve, Portugal, June 24-26, 2008.
Ali, S., Pasini, D. “Identification of Natural Frequencies of a Microcantilever by Using Stochastic Subspace Identification Algorithm", CSME Canadian Society for Mechanical Engineers Forum 2008, June 5-8, 2008, Ottawa.
Ghiasi H., Pasini D., Lessard L., Simultaneous Structural and Manufacturing Optimization of Composite Parts using Normal Constrained Method, 13th European Conference on Composite Materials, Stockholm, Sweden, June 2 - 5, 2008
Angeles, J., Khan, W.A., Caro, S., and Pasini, D.,The Conceptual Design of Robotic Architectures by Means of a Complexity Measure, 3rd international Colloquium of the collaborative research center SFB 562, April 28-29, 2008, Braunschweig.
RADZISZEWSKI, P.
Journal Publications
Martins, S., Li, W., Radziszewski, P., Caron, S., Aguanno, M., Bakhos, M., Petch, E.L. (2008), Validating the Instrumented Ball Outputs with Simple Trajectories, Minerals Engineering, Volume 21, Issue 11, October 2008, Pages 782-788. Wang, G., Radziszewski, P., Ouellet, J. (2008), Particle modeling simulation of thermal effects on ore breakage, Computational Materials Science, Volume 43, Issue 4, October 2008, Pages 892-901.
Refereed Conference Proceedings
Geng, L., Radziszewski, P. (2008), The Alternative Drive System: Design and developement of a cam-driven ball mill, VDM Verlag Publishers, 96 pages, ISBN-10: 3-639-01863-X Wang, G., Al-Ostaz, A., Cheng, A.H.-D., Radziszewski, P. (2008), Particle Modeling and Its Current Success in the Simulations of Dynamics Fragmentation of Solids, Invited chapter to “Strength of Materials: New Research Trends”
SHARF, I.
Refereed Conference Proceedings
Piersigilli P., I. Sharf and A.K. Misra, ''Reactionless Capture of a Satellite by a Two Degree-of-freedom Manipulator,'' Proc. IAC 2008, 59th International Astronautical Congress, IAC-08-C1.1.6, pp. 1-11, Glasgow, Sept. 29-Oct. 03, 2008.
Faragalli M., I. Sharf and M. Trentini, ''Velocity Control of a Hybrid Quadruped Bounding Robot,'' Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1-6, Nice, France, Sept. 22-26, 2008.
Sharf, I., B. Laumonier, M. Persson, J. Robert, ''Control of a Fully-actuated Airship for Satellite Emulation, '' Video Proceedings of IEEE International Conference on Robotics and Automation, ICRA2008, Pasadena, CA, May 19-23, 2008.
TIMOFEEV, E.V.
Journal Publications
Veillard, X., Tahir, R., Timofeev, E., and Molder, S., “Limiting contractions for starting simple ramp-type scramjet intakes with overboard spillage,” AIAA J. of Propulsion and Power, Vol. 24(5), pp. 1042-1049, 2008.
Refereed Conference Proceedings
Baig, S. and Timofeev, E., “A simple moving boundary technique and its application to inlet starting problems,” In: Proceedings of the 16th Annual Conference of the CFD Society of Canada, Saskatoon, Saskatchewan, University of Saskatchewan, June 9-11, 2008, 8p.
Tahir, R., Timofeev, E., and Molder, S., “On recent developments related to flow starting in hypersonic air intakes,” AIAA Paper 2008-2512, 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Dayton, Ohio, 28 April-1 May 2008, 9p.
VENGALLATORE, S.
Books
Microelectromechanical Systems—Materials and Devices, edited by D. LaVan, M. Spearing, S. Vengallatore, M. da Silva (Materials Research Society Symposium Proceedings, Volume 1052, Warrendale, PA). ISBN: 978-1-55899-990-9 (325 Pages)
Journal Publications
G. Sosale, S. A. Hacking, and S. Vengallatore (2008), “Topography Analysis of Grit-Blasted and Grit-Blasted-Acid-Etched Titanium Implant Surfaces using Multi-Scale Measurements and Multi-Parameter Statistics,” Journal of Materials Research, vol. 23, pp. 2704-2713
S. Prabhakar and S. Vengallatore (2008), “Theory of Thermoelastic Damping in Micromechanical Resonators with Two-Dimensional Heat Conduction,” IEEE/ASME Journal of Microelectromechanical Systems, vol. 17, pp.494-502
M. Kuhn, T. Napporn, M. Meunier, S. Vengallatore, and D. Therriault (2008), "Direct-Write Microfabrication of Single-Chamber Micro Solid-Oxide Fuel Cells," Journal of Micromechanics and Microengineering, vol. 18, art. no. 015005 (8 pages)
M. Kuhn, T. Napporn, M. Meunier, D. Therriault, and S. Vengallatore (2008), "Fabrication and Testing of Coplanar Single-Chamber Micro Solid-Oxide Fuel Cells with Geometrically Complex Electrodes," Journal of Power Sources, vol. 177, pp.148-153
Refereed Conference Publications
M. Liamini, H. Shahriar, S. Vengallatore and L. Fréchette (2008), “Thermal and structural considerations in the design of a Rankine vapor microturbine,” Proceedings of the 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008), November 9 – 12, 2008, Sendai, Japan (pp. 109-112).
F. Nabki, T. A. Dusatko, S. Vengallatore, and M. El-Gamal (2008), “Low-temperature (<300 oC), low-stress silicon carbide surface micromachining fabrication technology,” Proceedings of the Solid-State Sensors, Actuators, and Microsystems Workshop, June 1–5, Hilton Head, SC, USA, pp. 216-219.
B. Ashrafi, R. Pronovost, S. Vengallatore, and P. Hubert (2008), “Elastic characterization of SWNT-reinforced polymer thin films using a nanoindenter-based bending test,” Proceedings of the 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, April 7–10, Schaumburg, IL, USA (10 pages).
ZSOMBOR-MURRAY, P.
Journal Publications
Yu, A., Bonev, I. & Zsombor-Murray, P.J., (2008) ``Geometric Approach to the Accuracy Analysis of a Class of 3-DOF Planar Parallel Robots'', Mechanism & Machine Theory, Elsvier, v.43, n.3, pp.365-375.
Refereed Conference Proceedings
Zsombor-Murray, P.J. and Gfrerrer, A. (2009) ``Geometric Approach to 3R Wrist Positioning'', Computational Kinematics 2009, Kecskeméthy A. (ed.) , Duisburg, 09-05, (ISBN 978-3-642-01946-3, Springer, Berlin) pp.175-182.
Zsombor-Murray, P.J. (2008) ``Kinematic Mapping and Kinematics of some Parallel Manipulators'', Proc. 2nd Int. Wkshp. on Fundamental Issues & Research Directions for Parallel Mechanisms & Manipulators, Montpellier, 08-09, pp.41-48.
Zsombor-Murray, P.J. (2008) ``Tangency among Three Cylinders, a Hyperboloid and a Torus'', Proc. 13th Int. Conf. Geom. & Graph., Dresden, 08-08, ISBN 978-3-86780-042-6, 10pp.