Quick Links

Sample Publication

M. Haider, P. Hubert and L. Lessard, "Cure Shrinkage Characterization and Modeling of a Polyester Resin Containing Low Profile Additives", Composites Part A, 2007, 38, 994-1009. full text

B. Ashrafi, P. Hubert, S. Vengallatore, "Carbon Nanotube-Reinforced Composites as Structural Materials for Microactuators in Microelectromechanical Systems (MEMS)", Nanotechnology, 2006, 17, 4895-4903. full text

R.B. Pipes, P. Hubert, J.-P. Salvetat and L. Zalamea "Flexural Deflection as a Measure of van der Waals Interaction Forces in the NCT Array", Composites Science and Technology, 2006, 66, 1122–1128. full text

M. Rahmat and P. Hubert, "Numerical Simulation for the Geometric Design of Micro Heat Pipes", SHF – Microfluidics 2006, Toulouse, December 12-14 2006. full text [.pdf]

K. Adhikari, P. Hubert, B. Simard, A. Johnston, "Effect of the Localized Application of SWNT Modified Epoxy on the Interlaminar Shear Strength of Carbon Fibre Laminates", 47th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Newark, RI, May 1-4, 2006. full text [.pdf]

B. Ashrafi and P. Hubert, "Modeling the Elastic Properties of Carbon Nanotube Array/Polymer Composites", Composites Science and Technology, 2006, 66, 3-4, 387-396. full text

M. Dubé, P. Hubert, A. Yousefpour, M. Wadham-Gagnon, J. Denault, "Resistance Welding of Thermoplastic Composite Skin/Stringer Specimens", 51st SAMPE International Symposium, Long Beach, CA, April 30-May 4 2006. full text [.pdf]

M. Wadham-Gagnon, P. Hubert, M.P. Paidoussis, C. Semler, D. Lavoie, "Hyperelastic Modeling of Rubber in Commercial Finite Element Software (ANSYS)", 51st SAMPE International Symposium, Long Beach, CA, April 30-May 4 2006. full text [.pdf]

L. Petrescue, P. Hubert, S. Gordon, A. Johnston, M. Munro, "Process-induced Defects in Low-Cost Resin-Infused Aeronautical Structures", The 5th Canadian International Composites Conference, Vancouver, BC, August 16-19 2005.full text [.pdf]

E. Talbot, A. Yousefpour, P. Hubert, M. Hojjati, "Thermal Behaviour During Thermoplastic Composites Resistance Welding", ANTEC 2005, Boston, MA, May 1-5 2005. full text [.pdf]

P. Hubert, P. Pazdzior, A. Johnston, D. Djokic, "Development of Residual Stresses During E-Beam Processing", 50th SAMPE International Symposium, Long Beach, CA, May 1-5 2005. full text [.pdf]

G.M. Odegard, P. Hubert, R.B. Pipes and T.S. Gates, "Comparison of Two Models of SWCN Polymer Composites", Composites Science and Technology, 2004, 64, 7-8, 1011-1020. full text

P. Pazdzior, P. Hubert, D. Djokic and A. Johnston, "In-situ monitoring of residual stress development during E-Beam processing", 49th SAMPE International Symposium, Long Beach, CA, May 16-20 2004. full text [.pdf]

R.B. Pipes, S. Frankland, P. Hubert and E. Saether, "Self-Consistent Geometry, Density and Stiffness for SWCN and Its Hexagonal Arrays", Composites Science and Technology, 2003, 63, 10, 1349-1358. full text

R.B. Pipes and P. Hubert, "Scale Effects in Carbon Nanostructures: Self-Similar Analysis", Nanoletters, 2003, 3, 2, 239-243. full text [.pdf]

R.B. Pipes and P. Hubert, "Helical Carbon Nanotube Arrays: Thermal Expansion", Composites Science and Technology, 2003, 63, 11, 1571-1579. full text

B.W. Grimsley, R.J. Cano, P. Hubert, A.C. Loos, X.L. Song XL and R. B. Pipes, "Effects of Amine and Anhydride Curing Agents on the VARTM Matrix Processing Properties", Sampe Journal, 38, 4, 2002, 8-15. full text [.pdf]

R.B. Pipes and P. Hubert, "Helical Carbon Nanotube Arrays: Mechanical properties", Composites Science and Technology, 2002, 62, 3, 419-428. full text

Classified as