Publications 2013

Click here for the list of all publications, and conference proceedings for 2013.

AMABILI, M.

Journal Publications

Amabili, M., 2013, “Reduced-order models for nonlinear vibrations, based on natural modes: the case of the circular cylindrical shell”, Philosophical Transactions of the Royal Society A, Vol. 371, No. 1993, article 20120474 (17 pages).

Carra, S., Amabili, M., Garziera, R., 2013, “Experimental study of large amplitude vibrations of a thin plate in contact with sloshing liquids”, Journal of Fluids and Structures, vol. 42, pp. 88-111.

Alijani, F., Amabili, M., 2013, “Non-linear vibrations of laminated and sandwich rectangular plates with free edges, Part I: Theory & numerical simulations”, Composite Structures, Vol. 105, pp. 422-436.

Alijani, F., Amabili, M., Ferrari G., D’Alessandro, V., 2013, “Non-linear vibrations of laminated and sandwich rectangular plates with free edges, Part II: Experiments & comparisons”, Composite Structures, Vol. 105, pp. 437-445.

Kazemirad, S., Ghayesh, M.H., Amabili, M., 2013, “Thermo-mechanical nonlinear dynamics of a buckled axially moving beam”, Archive of Applied Mechanics, vol. 83, pp. 25-42.

Ghayesh, M.H., Amabili, M., 2013, “Three-dimensional nonlinear planar dynamics of an axially moving Timoshenko beam”, Archive of Applied Mechanics, Vol. 83, pp. 591-604.

Ghayesh, M.H., Amabili, M., 2013, “Steady-state transverse response of an axially moving beam with time-dependent axial speed”, International Journal of Non-linear Mechanics, Vol. 49, pp. 40-49.

Ghayesh, M.H., Amabili, M., Paidoussis, M.P., 2013, “Nonlinear dynamics of axially moving plates”, Journal of Sound and Vibration, Vol. 332, pp. 391-406.

Alijani, F., Amabili, M., 2013, “Nonlinear vibrations of thick laminated circular cylindrical panels”, Composite Structures, Vol. 96, pp. 643-660.

Alijani, F., Amabili, M., 2013, “Nonlinear dynamic instability of functionally graded plates in thermal environments”, International Journal of Non-linear Mechanics, Vol. 50, pp. 109-126.

Kheiri, M., Paidoussis, M.P., Amabili, M., 2013, “A nonlinear model for a towed flexible cylinder”, Journal of Sound and Vibration, Vol. 332, pp. 1789-1806.

Ghayesh, M.H., Amabili, M., Farokhi, H., 2013, “Nonlinear forced vibrations of a microbeam based on the strain gradient elasticity theory”, International Journal of Engineering Science, vol. 63, pp. 52-60.

Farokhi, H., Ghayesh, M.H, Amabili, M., 2013, “Nonlinear dynamics of a geometrically imperfect microbeam based on the modified couple stress theory”, International Journal of Engineering Science, vol. 68, pp. 11-23.

Ghayesh, M.H, Amabili, M., Farokhi, H., 2013, “Coupled global dynamics of an axially moving viscoelastic beam”, International Journal of Non-linear Mechanics, Vol. 51, pp. 54-74.

Askari, E., Jeong, K.H., Amabili, M., 2013, “Hydroelastic vibration of circular plates immersed in a liquid-filled container with free surface”, Journal of Sound and Vibration, Vol. 332, pp. 3064-3085.

Ghayesh, M.H, Amabili, M., Farokhi, H., 2013, “Three-dimensional nonlinear size-dependent behaviour of Timoshenko microbeams”, International Journal of Engineering Science, vol. 71, pp. 1-14.

Ghayesh, M.H, Farokhi, H., Amabili, M., 2013, “Nonlinear behaviour of electrically actuated MEMS resonators”, International Journal of Engineering Science, vol. 71, pp. 137-155.

Kheiri, M., Paidoussis, M.P., Amabili, M., Epureanu, B.I., 2013, “Three-dimensional dynamics of long pipes towed underwater. Part 1: The equations of motion”, Ocean Engineering, Vol. 64, pp. 153-160.

Kheiri, M., Paidoussis, M.P., Amabili, M., Epureanu, B.I., 2013, “Three-dimensional dynamics of long pipes towed underwater. Part 2: Linear dynamics”, Ocean Engineering, Vol. 64, pp. 161-173.

Ghayesh, M.H, Amabili, M., 2013, “Parametric stability and bifurcations of axially moving viscoelastic beams with time-dependent axial speed”, Mechanics Based Design of Structures and Machines, Vol. 41, pp. 359-381.

Ghayesh, M.H, Amabili, M., 2013, “Post-buckling bifurcations and stability of high-speed axially moving beams”, International Journal of Mechanical Sciences, Vol. 68, pp. 76-91.

Ghayesh, M.H, Amabili, M., 2013, “Nonlinear dynamics of an axially moving Timoshenko beam with an internal resonance”, Nonlinear Dynamics, Vol. 73, pp. 39-52.

Alijani, F., Amabili, M., 2013, “Theory and experiments for nonlinear vibrations of imperfect rectangular plates with free edges”, Journal of Sound and Vibration, Vol. 332, pp. 3564-3588.

Tubaldi, E., Amabili, M., 2013, “Vibrations and stability of periodically supported rectangular plate immersed in axial flow”, Journal of Fluids and Structures, Vol. 39, pp. 391-407.

Amabili, M., 2013, “A new nonlinear higher-order shear deformation theory with thickness variation for large-amplitude vibrations of laminated doubly curved shells”, Journal of Sound and Vibration, Vol. 332, pp. 4620-4640.

Ghayesh, M.H, Amabili, M., Farokhi, H., 2013, “Two-dimensional nonlinear dynamics of an axially moving viscoelastic beam with time-dependent axial speed”, Chaos, Solitons & Fractals, Vol. 52, pp. 8-29.

Ghayesh, M.H, Farokhi, H., Amabili, M., 2013, “Nonlinear dynamics of a microscale beam based on the modified couple stress theory”, Composites Part B: Engineering, Vol. 50, pp. 318-324.

Ghayesh, M.H, Amabili, M., 2013, “Nonlinear vibrations and stability of an axially moving Timoshenko beam with an intermediate spring support”, Mechanism and Machine Theory, Vol. 67, pp. 1-16.

Ghayesh, M.H, Amabili, M., 2013, “Non-linear global dynamics of an axially moving plate”, International Journal of Non-linear Mechanics, Vol. 57, pp. 16-30.

Ghayesh, M.H, Farokhi, H., Amabili, M., 2013, “Coupled nonlinear size-dependant behaviour of microbeams”, Applied Physics A: Material Science and Processing, Vol. 112, pp. 329-338.

Kazemirad, S., Ghayesh, M.H, Amabili, M., 2013, “Thermal effects on nonlinear vibrations of an axially moving beam with an intermediate spring-mass support”, Shock and Vibration, vol. 20, DOI: 10.3233/SAV-120752.

Ghayesh, M.H, Paidoussis, M.P., Amabili, M., 2013, “Nonlinear dynamics of cantilevered extensible pipes conveying fluid”, Journal of Sound and Vibration, Vol. 332, No. 24, pp. 6405-6418.

Conference Proceedings

Kheiri, M., Paidoussis, M.P., Amabili, M., Proceedings of the 24th CANCAM, “A nonlinear model for dynamics of a towed flexible cylinder”, Saskatoon, Canada. June 2-6, 2013.

Amabili, M., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “A new higher-order shear deformation theory with thickness variation for large-amplitude vibrations of laminated shells”, Montreal, Canada, July 23-26, 2013.

Shahmansouri, N., Amabili, M., Leask, R., Mongrain, R., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Investigation of damage accumulation in aortic tissue subjected to fatigue loading”, Montreal, Canada, July 23-26, 2013.

Kheiri, M., Paidoussis, M.P., Amabili, M., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Aspects of nonlinear dynamics of towed flexible cylinders”, Montreal, Canada, July 23-26, 2013.

Gayesh, M.H., Amabili, M., Paidoussis, M.P., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Stability and bifurcations of fluid-conveying cantilevered extensible pipes”, Montreal, Canada, July 23-26, 2013.

Alijani, F., Amabili, M., Ferrari, G., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Nonlinear dynamics of sandwich rectangular plates with free edges”, Montreal, Canada, July 23-26, 2013.

Alijani, F., Amabili, M., Ferrari, G., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Experiments for large amplitude vibrations of sandwich panels”, Montreal, Canada, July 23-26, 2013.

Tubaldi, E., Alijani F., Amabili, M., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Nonlinear vibrations of a periodically supported rectangular plate immersed in axial flow”, Montreal, Canada, July 23-26, 2013.

Zippo, A., Amabili, M., Pellicano, F., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Linear and nonlinear active vibration control of composite fiber plates”, Montreal, Canada, July 23-26, 2013.

Gayesh, M.H., Amabili, M., Paidoussis, M.P., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Stability and bifurcations of an axially moving plate”, Montreal, Canada, July 23-26, 2013.

Breslasky, I., Amabili, M., Legrand, M., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Static and dynamic analysis of hyperelastic plates”, Montreal, Canada, July 23-26, 2013.

Gayesh, M.H., Amabili, M., Farokhi, H., Garziera, R., Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, “Three dimensional nonlinear dynamics of an axially moving beam”, Montreal, Canada, July 23-26, 2013.

Amabili, M., Alijani, F., Shell structures: theory and applications (Proceedings of the 10th Conference Shell structures: theory and applications, Gdansk, Poland), CRC Press, “Nonlinear vibrations of shells: experiments, simulations and applications” (Invited General Lecture), October 16-18, 2013, Vol. 3, pp. 13-20.

ANGELES, J.

Journal Publications

Azimi, A., Kövecses, J. and Angeles, J., 2013, “Wheel-soil interaction model for rover simulation and analysis using elasto-plasticity theory”, IEEE Transactions on Robotics, Vol. 29, No. 5, pp. 1271-1288.

Chopra, V., Hajzargarbashi, S. and Angeles, J., 2013, “Parameter identification of the tesbed of a novel gearless pitch-roll wrist”, Mechanical Systems and Signal Processing, DOI: 10.1016/j.ymssp.2013.06.038.

Figliolini, G., Stachel, H. and Angeles, J., 2013, “On Martin Disteli's spatial cycloidal gearing”, Mechanism and Machine Theory, Vol. 60, pp. 73-89.

Alizadeh, D., Angeles, J. and Nokleby, S., 2013, “Optimum design of a spherical quasi-homokinetic linkage for motion transmission between orthogonal axes”, Mechanism and Machine Theory, Vol. 59, pp. 107-118.

Taghvaeipour, A, Angeles, J. and Lessard, L., 2013, “Constraint-wrench analysis of robotic manipulators”, Multibody System Dynamics, Vol. 29, No. 2, pp. 139-168.

Taghvaeipour, A, Angeles, J. and Lessard, L., 2013, “On the Elastostatic Analysis of Mechanical Systems”, Mechanism and Machine Theory, Vol. 58, pp. 202-216.

Book Chapters

Angeles, J., 2013, "Foundations for the approximate synthesis of RCCC motion generators," in Thomas, F. and Pérez Gracia, A., Editors, Computational Kinematics, Springer, Berlin-Heidelberg, pp. 331—338

Conference Proceedings

Azimi, A., Holz, D., Kövecses, J., Angeles, J. and Teichmann, M., "Dynamics simulation of rovers on soft terrain: modelling and experimental validation,'' Int. Soc. for Terrain-Vehicle Systems (ISTVS) 7th Americas Conference, Tampa, FL, Nov. 4-7, 2013.

Azimi, A., Holz, D., Kövecses, J., Angeles, J. and Teichmann, M., "High-fidelity and efficient rover mobility modelling and simulation based on plasticity theory,'' Int. Soc. for Terrain-Vehicle Systems (ISTVS) 7th Americas Conference, Tampa, FL, Nov. 4-7, 2013.

Harada, T. and Angeles, J., "Kinematics and singularity analysis of a CRRHHRRC parallel Schönflies motion generator'' Proc. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montreal, Canada, May 30-31, 2013, Paper 12, 10 pp.

Garneau, Y.G., Angeles, J. and Salerno, A., "The modeling of a mobile robot and its feedback control via pole-placement,'' Proc. ECCOMAS Thematic Conference on Multibody Dynamics, Zagreb, Croatia, July 1-4, 2013, Paper 185, 10 pp.

Zou, T. and Angeles, J., "Design of isotropic accelerometer strapdowns for rigid-body pose-and-twist estimation,'' Proc. ASME 2013 Int. Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013, Portland, OR., August 4-7, 2013, Paper DETC2013-12496, 9 pp.

Ghotbi, B., González, F., Azimi, A., Bird, W., Kövecses, J., Angeles, J. and Mukherji, R., "Analysis, optimization, and testing of planetary exploration rovers: challenges in multibody system modelling'', ECCOMAS Conf. Multibody Dynamics, Zagreb, Croatia, July 1-4, 2013, 2 pp.

Angeles, J., "Revisiting the skew-symmetry property of mechanical systems'', Proc. The 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), Montreal, Canada, July 23-26, 2013, Extended abstract Paper 869, 2pp.

Javid, F., Shahmansouri, N., Mongrain, R., Pasini, D. and Angeles, J., "Characterization of the toughness properties of mitral valve leaflets'', Proc. ASME 2013 Summer Bioengineering Conference, SBC2013, Sunriver, OR, June 26-29, 2013, Paper SBC2013-14738, 2 pp.

Shahmansouri, N., Javid, F., Pasini, D., Angeles, J. and Mongrain, R., "Investigation of the fatigue properties of mitral valve leaflets'', Proc. ASME 2013 Summer Bioengineering Conference, SBC2013, Sunriver, OR, June 26-29, 2013, Paper SBC2013-14758, 2 pp.

Azimi, A., Holz, D., Kövecses, J., Angeles, J. and Teichmann, M., "Wheel-terrain interaction modelling for dynamics simulation and analysis of wheeled mobile robots'', Proc. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montreal, Canada, May 30-31,2013, 2 pp.

BALIGA, B.R.

Journal Publications

Scott, D.A., Lamoureux, A., Baliga, B.R., 2013, “Modeling and simulations of laminar mixed convection in a vertical pipe conveying slurries of a microencapsulated phase-change material in distilled water”, ASME Journal of Heat Transfer, Vol. 135, pp. 011013_1-13.

Kattoura, S., Lamoureux, A., Baliga, B.R., 2013, “A control-volume finite element method for the prediction of three-dimensional diffusion-type phenomena in anisotropic media”, Computational Thermal Sciences, Vol. 5, 249-260.

Conference Proceedings

Lamoureux, A., Baliga, B.R., “Experimental study of a closed-loop thermosyphon operating with slurries of a microencapsulated phase-change material”, Proc. ASME Summer Heat Transfer Conference, Minneapolis, Minnesota, U.S.A., July 14-19, 2013, Paper # HT2013-17547, pp. 1-13.

Bories, S., Baliga, B.R., “Modeling of conduction and natural convection in ice-water systems containing porous metal foams”, Proc. ASME Summer Heat Transfer Conference, Minneapolis, Minnesota, U.S.A., July 14-19,2013, pp. 1-14. Paper # HT2013-17496,

Afara, S., Medvescek, J., Mydlarski, L., Baliga, B.R., Macdonald, M., “Development of a wall-shear-stress sensor and measurements in mini-channels with blockages”, Proc. 8th World Conference on Experimental Heat Transfer, Fluid Dynamics and Thermodynamics (ExHFT-8), Lisbon, Portugal, June 16-20, 2013, pp. 1-7.

BARTHELAT, F.

Journal Publications

Barthelat F., Mirkhalaf M., 2013, “The quest for stiff, strong and tough hybrid materials: an exhaustive exploration”, Journal of the Royal Society Interface 10 p. 20130711 (Featured in Nature Materials).

Bassett D.C., Merle G., Lennox B., Rabiei R., Barthelat F., Grover, L.M., Barralet, J.E., “Ultrasonic Phosphate Bonding of Nanoparticles”, Advanced Materials 25 (41), pp. 5953-5958

Heris, H.K., Miri, A.K., Tripathy, U., Barthelat, F., Mongeau L., 2013, “Indentation of poroviscoelastic vocal fold tissue using an atomic force microscope”, Journal of the Mechanical Behavior of Biomedical Materials 28, pp. 383-392

Hart, A., Harvey, E.J., Lefebvre, L.P., Barthelat, F., Rabiei, R., Martineau, P., 2013, “Insertion Profiles of 4 Headless Compression Screws”, Journal of Hand Surgery 38 (9) , pp. 1728-1734

Dastjerdi, A. K., Tan, E., Barthelat, F., 2013, “Direct measurement of the cohesive law of adhesives using a rigid double cantilever beam technique”, Experimental Mechanics 53(9), pp 1763-1772

Zhu D., Szewciw, L., Vernerey, F., Barthelat F., 2013, “Puncture resistance of the scaled skin from striped bass: collective mechanisms and inspiration for new flexible armor designs”, Journal of the Mechanical Behavior of Biomedical Materials 24 p. 30-34

Barthelat, F., Dastjerdi, A.K., Rabiei, R., 2013, “An improved failure criterion for biological and engineered staggered composites”, Journal of the Royal Society Interface 10 p. 20120849

Barthelat, F., 2013, “Science and engineering of natural materials: Merging structure and materials”, Journal of the Mechanical Behavior of Biomedical Materials 19 p. 1-2

Dastjerdi A.K, Rabiei, R., Barthelat, F., 2013, “The weak interfaces within tough natural composites: experiments on three types of nacre”, Journal of the Mechanical Behavior of Biomedical Materials 19 p. 50-60

Book Chapters

Rabiei, R., Dastjerdi, A.K., Mirkhalaf, M.,Barthelat, F., 2013, “Hierarchical structure, mechanical properties and fabrication of biomimetic biomaterials”, Biomimetic biomaterials: Structure and applications A J Ruys, Woodhead Publishing

Mirkhalaf, M., Zhu, D., Barthelat, F., 2013, “Biomimetic Hard Materials in Engineered Biomimicry”, A. Lakhtakia, R. J. Martin-Palma Eds. Elsevier

Zhu, D., Barthelat F., Vernerey, F., 2013, “Intricate Multiscale Mechanical Behaviors of Natural Fish-Scale Composites”, Handbook of Micromechanics and Nanomechanics S.Li, X. Gao Eds. Pan Stanford Publishing

Conference Proceedings

Zhu, D., Szewciw, L., Vernerey F., Barthelat, F., “The structure and mechanics of a high-performance armor: fish scales”, Minerals, Metals & Materials Society Annual Meeting , San Antonio, March 3-7, 2013.

Dastjerdi, A.K., Pagano, M., Kaartinen, M.T., McKee, M.D., Barthelat, F., “Interfacial fracture toughness measurement of soft biological adhesives”, Minerals, Metals & Materials Society Annual Meeting , San Antonio, March 3-7, 2013.

Barthelat, F., Dastjerdi A.K., Rabiei, R., “An improved failure criterion for biological and engineered staggered composites”, Society for Experimental Mechanics Annual Conference & Exposition on Experimental and Applied Mechanics Lombard IL, June 3-5, 2013.

Dastjerdi, A.K., Tan, E., Barthelat, F., “The Cohesive Law and Toughness of Engineering and Natural Adhesives”, Society for Experimental Mechanics Annual Conference & Exposition on Experimental and Applied Mechanics Lombard IL, June 3-5, 2013.

“Overcoming brittleness through bio-inspiration and micro-architecture”, 4th Canadian Conference on Nonlinear Solid Mechanics, Montreal, QC, July 23-26, 2013.

“Toughness amplification in natural composites”, 4th Canadian Conference on Nonlinear Solid Mechanics, Montreal, QC, July 23-26, 2013.

Ajaja, J., Barthelat, F., “Damage accumulation in a fiber reinforced composite for space applications”, 19th International Conference on Composite Materials, Montreal, QC, July 28-August 2, 2013.

Valashani M.M., Barthelat, F., “Bio-inspired nacre-like composites via simple, fast, and versatile techniques such as doctor-blading”, 19th International Conference on Composite Materials, Montreal, QC, July 28-August 2, 2013.

Dastjerdi, A.K., Barthelat, F., “Interlaminar Fracture Toughness of nacre : A high performance biological composite”, 19th International Conference on Composite Materials, Montreal, QC, July 28-August 2, 2013.

Valashani, M.M., Barthelat, F., “Nacre-like composites obtained from a simple, fast and inexpensive doctor-blading technique”, ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA, Nov 15-21,2013.

Zhu, D., Szewciw, L., Vernerey, F., Barthelat, F., “Failure mechanisms in a high-performance armor system: teleost fish scales”, ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, CA, Nov 15-21, 2013.

Zhu, D., Szewciw, L., Vernerey, F., Barthelat, F., “Biomimetic and multifunctional study of teleost fish skin”, 5th International Conference on Mechanics of Biomaterials and Tissues, Sitges Spain, 8-12 December, 2013.

Valashani, M.M., Dastjerdi, A.K., Barthelat, F., “Overcoming brittleness through bio-inspiration and micro-architecture: fabrication and testing of a tough and "ductile" glass”, 5th International Conference on Mechanics of Biomaterials and Tissues, Sitges, Spain, 8-12 December, 2013.

BERGTHORSON, J.M.

Journal Publications

Watson, G.M.G., Munzar, JD., Bergthorson, JM., 2013, “Diagnostics and modeling of stagnation flames for the validation of thermochemical combustion models for NOx predictions”, Energy & Fuels 27.11 , 7031-7043.

Yavor, Y., Goroshin, S., Bergthorson, J., Frost, D., Stowe, R., Ringuette, S., 2013, “Enhanced hydrogen generation from aluminum-water reactions”, International Journal of Hydrogen Energy 38.35, 14992-15002.

Fotovat, F., Chaouki, J., Bergthorson, J.M., 2013, “The effect of biomass particles on the gas distribution and dilute phase characteristics of sand-biomass mixtures fluidized in the bubbling regime”, Chemical Engineering Science 102, 129-138.

Munzar, J.D., Akih-Kumgeh, B., Denman B.M., Zia, A., Bergthorson, J.M., 2013, “An experimental and reduced modeling study of the laminar flame speed of jet fuel surrogate components”, Fuel 113, 586-597.

Akih-Kumgeh, B., Bergthorson, J.M., 2013, “Skeletal chemical kinetic mechanisms for syngas, methyl butanoate, n-heptane and n-decane”, Energy & Fuels 27, 2316-2326.

Chung, G.A., Akih-Kumgeh B., Watson G.M.G., Bergthorson, J.M., 2013, “NOx formation and flame velocity profiles of iso- and n- isomers of butane and butanol”, Proceedings of the Combustion Institute 34, 831-838.

Soo, M., Julien, P., Goroshin, S., Bergthorson, J.M., Frost, D., 2013, “Stabilized flames in hybrid aluminum-methane-air mixtures”, Proceedings of the Combustion Institute 34, 2213-2220.

Conference Proceedings

Akih-Kumgeh, B., Bergthorson, J.M., “A four component skeletal model for the analysis of jet fuel surrogate combustion”, Proceedings of the ASME Turbo Expo 2013, San Antonio, Texas, 2013, ASME paper GT2013-94813.

Munzar, J.D., Denman, B.M., Jimenez, R., Zia, A., Bergthorson, J.M., “Flame speed and vapour pressure of biojet fuel blends”, Proceedings of the ASME Turbo Expo 2013, San Antonio, Texas, 2013, ASME paper GT2013-94650

Palecka, J., Goroshin, S., Bergthorson, J.M., Frost, D.L., Higgins, A.J., “Quenching of methane-aluminum hybrid flames in narrow channels”, 7th International Seminar on Fire and Explosion Hazards, Providence, RI, 2013.

Julien, P., Whiteley, S., Goroshin, S., Bergthorson, J.M., Frost, D.L., “Propagation of flames in aluminum-air and aluminum-methane-air mixtures within balloons”, 7th International Seminar on Fire and Explosion Hazards, Providence, RI, 2013.

Akih-Kumgeh B., Bergthorson, J.M., “Skeletal mechanisms of n-butanol, methyl butanoate, and syngas using Alternate Species Elimination (ASE)”, Proceedings of the 8th U.S. National Combustion Meeting, Salt Lake City, UT, 2013.

Watson, G.M.G., Munzar, J.D., Versailles, P.,Bergthorson, J.M., “Experimental diagnostics and modelling of jet-wall stagnation flames for NOx sub-model validation”, Proceedings of the 8th U.S. National Combustion Meeting, Salt Lake City, UT, 2013.

Gauthier, G.P., Watson, G.M.G, Bergthorson, J.M., “Numerical investigation of flame propagation in small thermally-participating, adiabatic tubes”, Proceedings of the 8th U.S. National Combustion Meeting, Salt Lake City, UT, 2013.

Zia, A., Munzar, J.D., Versailles, P., Bergthorson, J.M., “Global and local extinction limits of laminar flames of Jet-A1/biofuel blends and their pure surrogate components”, Proceedings of the 2013, Spring Technical Meeting of the Combustion Institute/Canadian Section. Quebec, Canada, 2013.

Gauthier, G.P., Watson, G.M.G., Bergthorson, J.M., “Numerical investigation of flame propagation in small thermally-participating, adiabatic tubes”, Proceedings of the 2013 Spring Technical Meeting of the Combustion Institute/Canadian Section, Quebec, Canada, 2013.

Julien, P., Whiteley, S., Goroshin, S., Bergthorson, J.M., Frost, D.L., “Isobaric and freely-propagating flames in aluminum and aluminum-methane clouds with balloons”, Proceedings of the 2013 Spring Technical Meeting of the Combustion Institute/Canadian Section. Quebec, Canada, 2013.

Versailles, P., Munzar, J.D., Watson, G.M.G., Bergthorson, J.M., “Validation of chemical kinetic models against experimental measurements of premixed laminar C1-C4 alcohol-air flames”, Proceedings of the 2013 Spring Technical Meeting of the Combustion Institute/Canadian Section. Quebec, QC, 2013.

Whiteley, S., Julien, P., Goroshin, S., Frost, D.L., Bergthorson, J.M., “Stabilized iron-methane-air flames”, Proceedings of the 2013 Spring Technical Meeting of the Combustion Institute/Canadian Section, Quebec, Canada, 2013.

CORTELEZZI, L.

Journal Publications

Germaine, E., Mydlarski, L., Cortelezzi, L., 2013, “3DFLUX: A high-order fully three-dimensional flux integral solver for the scalar transport equation”, Journal of Computational Physics, Vol. 240, pp. 121-144.

Conference Proceedings

Quadrio, M., Rosti, M., Scarselli, D., Cortelezzi, L., “On the Effects of Porous Walls on Transitional and Turbulent Channel Flows”, Proceedings of the European Turbulence Conference 14, 2013.

Quadrio, M., Rosti, M., Scarselli, D., Cortelezzi, L., “On the Effects of Porous Walls on Transitional and Turbulent Channel Flows”, European Turbulence Conference 14, Lyon, France, September 1-4, 2013.

FROST, D.L.

Journal Publications

Yavor, Y., Goroshin, S., Bergthorson, J., Frost, D.L., Stowe, R., Ringuette, S., 2013, “Enhanced hydrogen generation from aluminum-water reactions, International Journal of Hydrogen Energy 38, pp. 14992-15002. DOI information: 10.1016/j.ijhydene.2013.09.070

Petel, O. E., Ouellet, S., Loiseau, J., Marr, B. J., Frost, D. L., Higgins, A. J., 2013, “The effect of particle strength on the ballistic resistance of shear thickening fluids,” Applied Physics Letters, Vol. 102, 064103. URL: http://dx.doi.org/10.1063/1.4791785

Soo, M., Julien, P., Goroshin, S., Bergthorson, J.M., and Frost, D.L., 2013, “Stabilized flames in hybrid aluminum-methane-air mixtures, Proceedings of the Combustion Institute, Vol. 34, No. 2, pp. 2213-2220. URL: http://dx.doi.org/10.1016/j.proci.2012.05.044.

Petel, O.E., Ouellet, S., Higgins, A.J., and Frost, D.L., 2013, “The elastic-plastic behavior of foam under shock loading”, Shock Waves, Vol. 23, No. 1, 55-67. URL: DOI: 10.1007/s00193-012-0414-7.

Conference Proceedings

Petel, O.E., Ouellet, S., Marr, B.J., Higgins, A.J., Frost, D.L., “Ballistic penetration of particle-laden elastomers”, Proc. 27th Int. Ballistics Symposium, Freiberg, Germany, April 22-26, 2013.

Capozzi, A., Loiseau, J., Nabavi, A., Petel, O.E., Higgins, A.J., Frost, D.L., “Ballistic impact response of chromium-sulfur CERMETS”, Proc. 27th Int. Ballistics Symposium, Freiberg, Germany, April 22-26, 2013.

Loiseau, J., Petel, O.E., Huneault, J., Serge, M., Frost, D.L., Higgins, A.J., “Explosive acceleration of plates using nonconventional explosives heavily loaded with inert and reactive materials”, Proceedings of the 19th APS topical meeting on Shock Compression of Condensed Material, July 7-12, 2013.

Frost, D.L., Ruel, J.-F., Zarei, Z., Goroshin, S., Gregoire, Y., Zhang, F., Milne, A., Longbottom, A., “Explosive formation of coherent particle jets”, Proceedings of the 19th APS topical meeting on Shock Compression of Condensed Material, July 7-12, 2013.

Petel, O.E., Appleby-Thomas, G., Hameed, A., Capozzi, A., Goroshin, S., Frost, D.L., Hazell, P., “Lateral stress evolution in chromium sulfide”, Proceedings of the 19th APS topical meeting on Shock Compression of Condensed Material, July 7-12, 2013.

Petel, O.E., Ouellet, S., Higgins, A.J., and Frost, D.L., “Shock Hugoniot measurements in foam”, Proceedings of the 19th APS topical meeting on Shock Compression of Condensed Material, July 7-12, 2013.

Loiseau, J., Huneault, J., Petel, O., Goroshin, S., Frost, D.L., Higgins, A.J., and Zhang, F., “Development of multi-component explosive lenses for arbitrary phase velocity generation”, Proceedings of the 19th APS topical meeting on Shock Compression of Condensed Material, July 7-12, 2013.

Marr, B., Petel, O., Frost, D.L., and Higgins, A., “Shock-induced deformation in dry and wetted particle beds”, Proceedings of the 19th APS topical meeting on Shock Compression of Condensed Material, July 7-12, 2013.

Barua, R., Mongrain, R., Aydin, H., Yue, S., Bertrand, O.F., Frost, D. L., “Degradation behavior of nanostructured stent materials using cold spray”, Proc. of the ASME 2013 Summer Bioengineering Conference, SBC2-2013, June 26-29, 2013.

Julien, P., Whiteley, S., Goroshin, S., Frost, D.L. and Bergthorson, J., “Propagation of flames in aluminum-air and aluminum-methane-air mixtures within balloons”, Proceedings of the Seventh international Seminar on Fire and Explosion Hazards (ISFEH7), May 5-10, 2013.

Palecka, J., Goroshin, S., Bergthorson, J., Frost, D.L., and Higgins, A., “Quenching of methane-aluminum hybrid flames in narrow channels”, Proceedings of the Seventh international Seminar on Fire and Explosion Hazards (ISFEH7), May 5-10, 2013.

Nabavi, A., Capozzi, A., Goroshin, S., Frost, D.L., and Barthelat, F., “Net-shape manufacturing of metal-metal sulfide cermets by SHS”, Proc. 12th Int. Symposium on Self-Propagating High-Temperature Synthesis, South Padre Island, TX, USA, Oct. 21-24, 2013.

Julien, P., Whiteley, S., Goroshin, S., Frost, D.L., and Bergthorson, J., “Isobaric and freely-propagating spherical flames in aluminum and aluminum-methane clouds within balloons”, Proceedings of the 2013 Spring Technical Meeting of the Combustion Institute, Canadian Section, University Laval, May 13-16, 2013.

Whiteley, S., Julien, P., Goroshin, S., Frost, D.L., and Bergthorson, J., “Stabilized iron-methane-air flames”, Proceedings of the 2013 Spring Technical Meeting of the Combustion Institute, Canadian Section, University Laval, May 13-16, 2013.

HABASHI, W.G.

Journal Publications

Zhang, Y., Khurram, R.A., Habashi W.G., 2013, “Multiscale Finite Element Method Applied to Detached-Eddy Simulation for Computational Wind Engineering, Wind and Structures Vol. 17(1), pp. 1-19,

Fossati, M., Habashi, W.G., 2013, “Multi-parameter Analysis of Aero-Icing Problems using Proper Orthogonal Decomposition and Multi-dimensional Interpolation”, AIAA Journal, Vol. 51, No. 4, pp. 946-960.

Keyhan, H., McClure G., Habashi, W.G., 2013, “Dynamic Analysis of an Overhead Transmission Line Subject to Gusty Wind Loading Predicted by Wind-Conductor Interaction", Computers & Structures, Vol. 122, pp. 135–144.

Pourbagian, M., Habashi, W.G., 2013, “Surrogate-Based Optimization of Electro-Thermal Airfoil Anti-Icing Systems”, AIAA Journal of Aircraft, Vol. 50, No. 5, pp. 1555-1563.

Conference Proceedings

Fossati, M., Nilamdeen, S., Moustapha, H., Habashi W.G., “Parametric Analysis of 3D Turbomachinery flows via Reduced Order Modeling”, 20th International Symposium on Air Breathing Engines, Busan, Korea, September, 2013.

Fossati, M., Habashi W.G., “Evaluation of aerodynamic loads via POD-based Reduced Order Methodology”, SAE13-ATC-0349, SAE 2013 Aerotech Congress and Exhibition, Montreal, Quebec, Canada, 2013.

Fouladi, H., Habashi W.G., “FENSAP-ICE: Simulation of ice accretion on an oscillating airfoil”, SAE13-ATC-0354, SAE 2013 AeroTech Congress & Exhibition, Montreal, Canada, September 2013.

Zhan, Z., Habashi, W.G., Fossati, M., “Exploration of Icing Envelopes using Reduced Order Modeling and Iterative Sampling”, SAE13-ATC-0351, SAE 2013 AeroTech Congress and Exhibition, Montreal, September 2013.

Pourbagian, M., Habashi W.G., “Optimal Adjustment of Electro-Thermal Wing Ice Protection Systems in Different Operating Regimes”, SAE13-ATC-0350, SAE 2013 AeroTech Congress and Exhibition, Montreal, September 2013.

Zhang, Y., Habashi W.G., “Performance Degradation of Iced Airfoils via Hybrid RANS/LES”, SAE13-ATC-0352, SAE 2013 AeroTech Congress and Exhibition, Montreal, September 2013.

Abdollahi, V., Habashi, W.G., Fossati, M., “Quasi-molecular Modeling of Supercooled Large Droplets Dynamics for In-flight Icing Simulations”, AIAA Paper 2013-3057, AIAA 43rd Fluid Dynamics Conference, San Diego, USA, June 2013.

Pourbagian, M., Habashi W.G., “On Optimal Design of Electro-Thermal In-Flight Ice Protection Systems”, AIAA Paper 2013-2937, AIAA 43rd Fluid Dynamics Conference, San Diego, USA, June 2013.

Bilodeau, D.R., Habashi W.G., Baruzzi, G.S., Fossati, M., “Numerical Modeling of Splashing and Bouncing Phenomena in SLD Conditions”, AIAA Paper 2013-3058, AIAA 43rd Fluid Dynamics Conference, San Diego, USA, June 2013.

Naggapan, N., Golubev, V., Habashi W.G., “Parametric Analysis of Icing Control Using Synthetic Jet Actuators”, AIAA 43rd Fluid Dynamics Conference, San Diego, USA, June 2013.

Bilodeau, D., Habashi W.G., Fossati, M., “Numerical Modeling of Supercooled Large Droplets Re-impingement”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Bakkar, A., Habashi W.G., Fossati, M., “A Hybrid Taylor-Galerkin Variational Multi-Scale Stabilization Method for the Level Set Equation”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Zhan, Z., Habashi W.G., Fossati, M., “Exploration of the Aero-icing Envelopes via Reduced Order Modeling and Iterative”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Fouladi, H., Habashi W.G., “FENSAP-ICE: Quasi-3D Simulation of Helicopter Rotor Blade Icing in Hover”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Zhang, Y., Habashi W.G., Khurram, R.A., “A Hybrid RANS/LES Method for Turbulent Flow over Iced Wings”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Borna, A., Habashi W.G., McClure, G., “Computational Aeroelastic Modeling of Transmission Line Galloping”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Abdollahi, V., Habashi W.G., Fossati, M., “Quasi-molecular Modeling of Supercooled Large Droplets Dynamics for In-flight Icing Simulations”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Nagappan, N., Golubev, V., Habashi W.G., “Numerical Modeling of Anti-icing Using an Array of Heated Synthetic Jets”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, Canada, May 2013.

Habashi W.G., “The Role of Finite Element Methods in In-flight Icing Simulation”, Keynote Address, Advances in Computational Mechanics (ACM 2013), San Diego, California, USA, February 2013.

Reid, T., Baruzzi, G.S., Ozcer, I.A., Switchenko, D., Habashi W.G., “CFD Simulation of Icing on Wind Turbine Blades, Part 1: Performance Degradation”, AIAA Paper 2013-0750, 51st AIAA Aerospace Sciences Meeting, Grapevine, USA, January 2013.

Reid, T., Baruzzi, G.S., Ozcer, I.A., Switchenko, D., Habashi, W.G., “CFD Simulation of Icing on Wind Turbine Blades, Part 2: Ice Protection System Design”, AIAA Paper 2013-0751, 51st AIAA Aerospace Sciences Meeting, Grapevine, USA, January 2013.

Pourbagian, M., Habashi, W.G., “Multidisciplinary Optimization of Electro-Thermal In-Flight Ice Protection Systems in De-Icing Mode”, AIAA Paper 2013-0654, 51st AIAA Aerospace Sciences Meeting, USA, January 2013.

Naggapan, N., Golubev, V., Nakhla, H., Habashi, W.G., “On Icing Control Using Thermally Activated Synthetic Jets”, AIAA Paper 2013-0093, 51st AIAA Aerospace Sciences Meeting, Grapevine, USA, January 2013.

Ahn, G.B., Jung, K.Y., Myong, R.S., Shin, H.B., Habashi, W.G., “Computational and Experimental Simulation of Ice Accretion on the Surface of Rotorcraft Air Intake Anti-Icing System”, AIAA Paper 2013-1077, 51st AIAA Aerospace Sciences Meeting, Grapevine, USA, January 2013.

HIGGINS, A.J.

Journal Publications

Mi, X., Goroshin, S., Higgins, A.J., Stowe, R., and Ringuette, S., Nov. 2013, “Dual-stage ignition of boron particle agglomerates”, Combustion and Flame, Vol. 160, Issue 11, pp. 2608-2618.

Chiu, P.H., Olney, K.L., Higgins, A., Serge, M., Benson, D.J., Nesterenko, V.F., 2013, “The mechanism of instability and localized reaction in the explosively driven collapse of thick walled Ni-Al laminate cylinders”, Applied Physics Letters, Vol. 102, 241912.

Petel, O.E., Ouellet, S., Loiseau, J., Marr, B.J., Frost, D.L., and Higgins, A.J., 2013, “The effect of particle strength on the ballistic resistance of shear thickening fluids”, Applied Physics Letters, Vol. 102, 064103.

Kiyanda, C. B., Higgins, A. J., 2013, “Photographic investigation into the mechanism of combustion in irregular detonation waves”, Shock Waves, Vol. 23, Issue 2, pp. 115-130.

Petel, O.E., Ouellet, S., Higgins, A.J., Frost, D.L., 2013, “The Elastic-Plastic Behaviour of Foam under Shock Loading”, Shock Waves, Vol. 23, Issue 1, pp 55-67.

Verreault, J., Higgins, A.J., and Stowe, R.A., 2013, “Formation of transverse waves in oblique detonations”, Proceedings of the Combustion Institute, Vol. 34, Issue 2, pp. 1913-1920.

Conference Proceedings

Mi X.C., Goroshin S., Higgins A.J., “Dual-Stage Ignition of Boron Particle Agglomerate”, 24th International Colloquium on the Dynamics of Explosions and Reactive Systems, Taipei, July 28-Aug. 2, 2013.

Devito A., Julien P., Goroshin S., Higgins A.J., “Investigation of Supersonic Combustion of Bulk Metal via Spectroscopy”, 24th International Colloquium on the Dynamics of Explosions and Reactive Systems, Taipei, July 28-Aug. 2, 2013.

Li, J., Higgins A.J., “Geometric Scaling for a Detonation Wave Governed by a Pressure-Dependent Reaction Rate and Yielding Confinement”, 24th International Colloquium on the Dynamics of Explosions and Reactive Systems, Taipei, July 28-Aug. 2, 2013.

Serge, M., Petel, O., Loiseau, J., Higgins, A.J., “Strength effects in an imploding cylinder with constant mass-to-explosive loading”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Olney, K., Chiu, P.H., Higgins, A., Serge, M., Fritz, G., Stover, A., Benson, D., Nesterenko, V., “Mechanisms of high strain, high strain rate plastic flow in the explosively driven collapse of Ni-Al laminate cylinders”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Loiseau, J., Huneault, J., Petel, O., Goroshin, S., Frost, D., Higgins, A., Zhang, F., “Development of multi-component explosive lenses for arbitrary phase velocity generation”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Loiseau, J., Petel, O., Huneault, J., Serge, M., Frost, D., Higgins, A.J., “Explosive acceleration of plates using nonconventional explosives heavily loaded with inert and reactive materials”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Petel, O., Ouellet, S., Frost, D., Higgins, A., “Shock Hugoniot Measurements in Foam”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Serge, M., Nabavi, A., Chiu, P.H., Higgins, A., Nesterenko V., “Reactivity of Ti-B, Cr-S, and Mn-S powder systems during explosively-driven collapse”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Huneault, J., Loiseau, J., Higgins, A.J., “Development of an accelerating-piston implosion-driven launcher”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Marr, B., Petel, O., Frost, D., Higgins, A.J., “Shock-Induced Deformation in Dry and Wetted Particle Beds”, 18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter, Seattle, Washington, July 7-12, 2013.

Capozzi, A., Loiseau, J., Nabavi, A., Petel, O., Higgins, A.J., and Frost, D.L., Ballistic “Impact Response of Chromium-Sulfur CERMETS”, Ballistics 2013: Proceedings of the 27th International Symposium on Ballistics (ed. M. Wickert, M. Salk), Freiberg, Germany, April 22-26, 2013, pp. 1914-1923.

Loiseau, J., Huneault, J., and Higgins, A.J., “Development of an Explosively Driven Two-Stage Light Gas Gun for High-Velocity Impact Studies”, Ballistics 2013: Proceedings of the 27th International Symposium on Ballistics (ed. M. Wickert, M. Salk), Freiberg, Germany, April 22-26, 2013, pp. 382-393.

Petel, O.E., Ouellet, S., Marr, B.J., Higgins, A.J., and Frost, D.L., “Ballistic Penetration of Particle-Laden Elastomers”, Ballistics 2013: Proceedings of the 27th International Symposium on Ballistics (ed. M. Wickert, M. Salk), Freiberg, Germany, April 22-26, 2013, pp. 1019-1029.

Loiseau, J., Huneault, J., Higgins, A.J., “Development of a Linear Implosion-driven Hypervelocity Launcher”, Procedia Engineering, Proceedings of the 12th Hypervelocity Impact Symposium, 2013, Vol. 58, pp. 77–87.

Devito, A., and Higgins, A.J., “Ignition Envelope for Supersonic Combustion of Bulk Metals”, AIAA Paper 2013-0888, 51st AIAA Aerospace Sciences, Grapevine, Texas, January 7–10, 2013.

Huneault, J., Loiseau, J., Higgins, A.J., and Farinaccio, R., “Coupled Lagrangian Gasdynamic and Structural Hydrocode Solvers for Simulating an Implosion-Driven Hypervelocity Launcher”, AIAA Paper 2013-0274, 51st AIAA Aerospace Sciences, Grapevine, Texas, January 7–10, 2013.

HUBERT, P.

Journal Publications

Yourdkhani, M., Mousavand, T., Chapleau, N., Hubert, P., 2013, “Oxygen Barrier and Mechanical Properties of Polylactide-Organoclay Nanocomposites”, Composites Science and Technology, 82 47-53.

Kratz, J., Hubert, P., 2013, “Anisotropic Air Permeability in Out-of-autoclave Prepregs: Effect on Honeycomb Panel Evacuation Prior to Cure”, Composites Part A, 49 179-191.

Feret, V., Ghiasi, H., Hubert, P., 2013, “Effect of Fibre Volume Fraction on Mixed-Mode Fracture of a Fabric Carbon/Epoxy Composite Composites”, Applied Composite Materials, 20(4) 415-429.

Palardy, G., Trudel-Boucher, D., Hubert, P., 2013, “Investigation of a Postprocessing Method to Tailor the Mechanical Properties of Carbon Nanotube/Polyamide Fibers”, Journal of Applied Polymer Science, 6 4375-4382.

Talbot, E., Dubé, M., Yousefpour, A., Hubert, P., 2013, “Optimization of Thermoplastic Composites Resistance Welding Parameters Based on Transient Heat Transfer Finite Element Modeling”, Journal of Thermoplastic Composite Materials, 26(5) 699–717.

Phillips, S., Baets, J., Lessard, L., Hubert, P., Verpoest, I., 2013, “Characterization of Flax/epoxy Prepregs Before and After Cure”, Journal of Reinforced Plastics and Composites, 32(11) 777–785.

Foroutan, R., Nemes, J., Ghiasi, H., Hubert, P., 2013, “Experimental Investigation of High Strain-rate Behaviour of Fabric Composites”, Composite Structures, 106, 264-269.

Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., Lévesque, M., 2013, “Prediction of Elastic Properties in Polymer–clay Nanocomposites: Analytical Homogenization Methods and 3D Finite Element Modeling”, Computational Materials Science, 79, 206-215.

Ashrafi, B., Martinez-Rubi, Y., Khoun, L., Yourdkhani, M., Kingston, C., Hubert, P., Simard, B., Johnston, A., 2013, “Influence of the Reaction Stoichiometry on the Mechanical and Thermal Properties of SWCNT Modified Epoxy Composites”, Nanotechnology, 24, 265701

Yourdkhani, M., Hubert, P., 2013, “Quantitative Dispersion Analysis of Inclusions in Polymer Composites”, ACS Applied Materials & Interfaces, 5, 1, 35-41.

Grunenfelder, L., Centea, T., Hubert, P., Nutt, S., 2013, “Tow Impregnation in an Out-of-autoclave Prepreg as a Function of Room Temperature Aging Time”, Composites Part A, 45, 119-126.

Kratz, J., Hsiao, K., Fernlund, G., Hubert, P., 2013, “Thermal Models for MTM45-1 and Cycom 5320 Out-of-autoclave Prepreg Resins”, Journal of Composite Materials, 47, 3, 341-352.

Book Chapters

Centea, T., and Hubert, P., “The Effect of Material and Process Parameters on Tow Impregnation and Micro-Void Formation in Out-of-Autoclave Prepregs”, American Society for Composites Series on Advances in Composite Materials, Volume 6, Manufacturing of Composites, Editors Alfred C. Loos and Michael W. Hyer, DEStech Publications, 2013.

Conference Proceedings

Hughes, S., Hubert, P., “Out-of-autoclave Prepreg Processing Effect of Integrated Geometric Features on Part Quality”, SAMPE Technical Conference 2013, Wichita, KS, October 21-24, 2013.

Préau, M., Bujun, K., Auda, N., Hubert, P., “Out-of-autoclave Soft Patch Breathing Solutions for Low Porosity Repairs”, SAMPE Technical Conference 2013, Wichita, KS, October 21-24, 2013.

Smith, A., Goyette, K., Kazanas, C., Hubert, P., “Development of a Heated Tooling Solution to Improve Process Flexibility for Out-of-autoclave Prepregs”, SAMPE Technical Conference 2013, Wichita, KS, October 21-24, 2013.

Helmus, R., Centea, T., Hubert, P., Hinterhölzl, R., “An Integrated Process Model for Air Evacuation in Out-of-Autoclave Prepreg Consolidation”, 28th ASC Annual Technical Conference, State College, PA, September 9-11, 2013.

Yourdkhani, M., Hubert, P., “Reagglomeration of Carbon Nanotubes during Processing of Epoxy Nanocomposites”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Cattin, C., Liu, W., Hubert, P., “Comparing Electromechanical Characteristics of Polymer – Carbon Nanotube and Polymer – Carbon Fibre – Carbon Nanotube Composites”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Selezneva, M., Dodji, K., Lessard, L., Hubert, P., “Mechanical Properties of Randomly Oriented Strand (ROS) Thermoplastic Composites”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Trudeau, P., Salek, H., Jette, M.A., Hubert, P., Demaria, C., Palardy, G., “Process Induced Deformation of Aircraft Structural Components”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Landry, B., Hubert, P., “Processing Effect on the Damage Tolerance of Randomly-Oriented Strands Thermoplastic Composites”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Picher-Martel, G.P., Levy, A., Hubert, P., “Squeeze Flow of Randomly Oriented Strands Thermoplastic Composites”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Gagné-Brulotte, X., Levy, A., Hubert, P., “Effect of the Tape/substrate Orientation on the Tape Deformation during Automated Tape Placement”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Phillips, S., Lessard, L., Hubert, P., Kuo, P., Sain, M., Demaria, C., “Development of Multi-Scale Biocomposites From Flax, Nanocellulose and Epoxy by Resin Infusion”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Centea, T., Préau, M., Hubert, P., “Effect of Layup and Ply Morphology on Void Formation in Out-of-Autoclave Prepregs”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Kratz, J., Hubert, P., “Vacuum Bag only Manufacturing of Honeycomb Sandwich Panels”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Khoun, L., Hubert, P., Challagulla, K.S., “Modelling of the Thermo-mechanical Properties of Woven Composites during the Cure”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Pahlavanpour, M., Hubert, P., Lévesque, M., “Homogenization Models for Polymer-clay Nanocomposites One and Two Step Approaches”, The 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, July 28 – August 2, 2013.

Yourdkhani, M., Mousavand, T., Chapleau, N., Hubert, P., “Organoclay-modified Polylactide: A Study on Mechanical, Thermal, and Barrier Properties”, 17th International Conference on Composite Structures, Porto, Portugal, June 17-21, 2013.

KOKKOLARAS, M.

Journal Publications

Li, J., Mourelatos, Z., Kokkolaras, M., Papalambros, P.Y., Gorsich, D., 2013, “Maximizing Design Confidence in Sequential Simulation-based Optimization”, Transactions of the ASME - Journal of Mechanical Design, 135(6).

Kokkolaras, M., Hulbert, G., Papalambros, P., Mourelatos, Z., Yang, R.J., Brudnak, M., Gorsich, D., 2013, “Towards a Comprehensive Framework for Simulation-based Vehicle Systems Design Validation”, International Journal of Vehicle Design, 61(1-4):233-248.

Hoffenson, S., Arepally, S., Kokkolaras, M., Papalambros, P.Y., 2013, “Quantification of the Design Relationship between Ground Vehicle Weight and Occupant Safety under Blast Loading”, International Journal of Vehicle Design, 61(1-4):204-218.

Conference Proceedings

Corl, M.J., Parsons, M.G., Kokkolaras, M., “Optimal Commonality Decisions in Multiple Ship Classes, Advances in Product Family and Product Platform Design: Methods and Applications”, T.W. Simpson, R.J. Jiao, Z. Siddique and K. Holtta-Otto, editors, Springer Verlag, September 2013.

Drignei, D., Mourelatos, Z., Pandey, V., Kokkolaras, M., Gorsich, D., “Accounting for Test Variability through Sizing Local Domains in Sequential Design Optimization with Concurrent Calibration-Based Model Validation”, Proceedings of the 39th ASME Design Automation Conference, Portland, Oregon, August 4-7, 2013, paper no. DETC-2013- 12352.

Drignei, D., Mourelatos, Z., Pandey, V., Baseski, I., Kokkolaras, M., Singh, A., Lamb, D., “A Cost-Driven Method for Design Optimization Using Validated Local Domains, Proceedings of the SAE World Congress”, Detroit, Michigan, April 16-18, 2013, paper no. 2013-01-1385.

Kang, N., Kokkolaras, M., Papalambros, P., “Solution of Multiobjective Optimization Problems via Non-hierarchical Analytical Target Cascading: A Quasi-separable MDO formulation”, Proceedings of the 10th World Congress on Structural and Multi- disciplinary Optimization, Orlando, Florida, May 19-24, 2013.

Drignei, D., Mourelatos, Z.P., Kokkolaras, M., “A New Approach to Model Validation for Design Optimization”, 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, Florida, May 19-24, 2013 (abstract and presentation only).

Kokkolaras, M., “Optimization in Decomposition-based System Design”, Optimization Days, HEC, Montreal, Quebec, Canada, May 6-8, 2013 (abstract and presentation only).

KÖVECSES, J.

Journal Publications

Azimi, A., Kövecses, J., Angeles, J., 2013, “Wheel-Soil Interaction Model for Rover Simulation and Analysis Using Elasto-Plasticity Theory”, IEEE Transactions on Robotics, Vol. 29, No. 5, pp. 1271-1288.

Hirschkorn, M., Kövecses, J., 2013, “The Role of the Mass Matrix in the Analysis of Mechanical Systems”, Multibody System Dynamics, Volume 30, Issue 4, pp 397-412.

Mohtat, A., Kövecses, J., 2013, “Energy-Consistent Force Feedback Laws for Virtual Environments”, ASME Journal of Computing and Information Science in Engineering, Vol. 13, No. 3, pp. 031003_1-13 (13 pages).

Gonzalez Varela, F. J., Kövecses, J., 2013, “Use of Penalty Formulations in the Dynamic Simulation and Analysis of Redundantly Constrained Multibody Systems”, Multibody System Dynamics, Vol. 29, No. 1, pp. 57-76.

Conference Proceedings

Mohtat, A., Kövecses, J., “Energy-Consistent Haptic Rendering of Contact Forces”, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Tokyo, Japan, November 3-8, 2013.

Ghaffari, K.T., Kövecses, J., “A High-performance Velocity Estimator for Haptic Applications”. 2013 IEEE World Haptics Conference, Daejeon, Republic of Korea, April 14-18, 2013.

Shayan Amin, S., Kovács, L.L., Kövecses, J., “The Role of Mechanical Properties on the Behaviour and Performance of Multi-DoF Haptic Devices”. 2013 IEEE World Haptics Conference, Daejeon, Republic of Korea, April 14-18, 2013.

Shayan Amin, S., Kovács, L.L., Kövecses, J., “Virtual Contact Dynamics Behaviour in Haptic Interfacing”. ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013), Portland, OR, USA, August 4-7, 2013.

Azimi, A., Holz, D., Kövecses, J., Angeles, J., Teichmann, M., “Dynamics Simulation of Rovers on Soft Terrain: Modelling and Experimental Validation”. International Society for Terrain-Vehicle Systems (ISTVS) 7th Americas Conference, Tampa, FL, USA, November 4-7, 2013.

Azimi, A., Holz, D., Kövecses, J., Angeles, J., Teichmann, M., “High-Fidelity and Efficient Rover Mobility Modelling and Simulation Based on Plasticity Theory”, International Society for Terrain-Vehicle Systems (ISTVS) 7th Americas Conference, Tampa, FL, USA, November 4-7, 2013.

Nasri, M., González, F., Kövecses, J., Teichmann, M., Wray, W., “A Complementarity Formulation for Rigid Body Contact Problems and a Solution Algorithm”, The 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montréal, Canada, July 23-26, 2013.

Ghotbi, B., González, F., Kövecses, J., Angeles, J., “Experimental Validation of Multibody Algorithms for Dynamics Analysis of Mobile Robots”, The 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montréal, Canada, July 23-26, 2013.

González, F., Dopico, D., Cuadrado, J., Kövecses, J., “Reaction Efforts Associated with Non-Holonomic and Rheonomic Constraints in Index-3 Augmented Lagrangian Formulations”, Multibody Dynamics 2013, ECCOMAS Thematic Conference, Zagreb, Croatia, July 1-4, 2013.

Ghotbi, B., González, F., Azimi, A., Bird, W., Kövecses, J., Angeles, J., Mukherji, R., “Analysis, Optimization, and Testing of Planetary Exploration Rovers: Challenges in Multibody System Modelling”. Multibody Dynamics 2013, ECCOMAS Thematic Conference, Zagreb, Croatia, July 1-4, 2013.

Font-Llagunes, J. M., Pàmies-Vilà, R., Kövecses, J., “Configuration-Dependent Performance Indicators for the Analysis of Foot Impact in Running Gait”, Multibody Dynamics 2013, ECCOMAS Thematic Conference, Zagreb, Croatia, July 1-4, 2013.

Kovacs, L., Shayan Amin, S., Kövecses, J., “Performance Optimization of Haptic Multibody Systems”. Multibody Dynamics 2013, ECCOMAS Thematic Conference, Zagreb, Croatia, July 1-4, 2013.

Azimi, A., Holz, D., Kövecses, J., Angeles, J., Teichmann, M., “Wheel-terrain interaction modelling for dynamics simulation and analysis of wheeled mobile robots”, Proc. CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Montreal, Quebec, Canada, May 30-31, 2013.

LEE, J.H.S.

Journal Publications

Zhang, B., Ng, H.D., Lee, J.H.S., 2013, “Measurement and relationship between critical tube diameter and critical energy for direct blast initiation of gaseous detonations”, Journal of Loss Prevention in the Process Industries, vol. 26: 1293-1299.

Mehrjoo, N., Zhang, B., Portaro, R., Ng, H.D., Lee, J.H.S., 2013, “Response of critical tube diameter phenomenon to small perturbations for gaseous detonations”, Shock Waves Journal, In press. (DOI: 10.1007/s00193-013-0491-2)

Zhang, B., Mehrjoo, N., Ng, H.D., Lee, J.H.S., Bai, C.H. ,2013, “On the dynamic detonation parameters in acetylene-oxygen mixtures with varying amount of argon dilution”, Combustion and Flame, In press. (DOI: 10.1016/j.combustflame.2013.11.016)

Conference Proceedings

Lee, J.H.S., “Comment on detonations in accidental explosions”, Proceedings of the Seventh International Seminar on Fire and Explosion Hazards, Rhode Island, Providence, May 5, 2013, pp. 3-7.

Gao, Y., Lee, J.H.S., Ng, H.D., “Velocity fluctuations near the detonation limits”, Proceedings of the 24th International Colloquium on the Dynamics of Explosions and Reactive Systems, Taipei, Taiwan, July 28-August 2, 2013.

Starr, A., Lee, J.H.S., “Detonation limits in rough walled tubes”, Proceedings of the 24th International Colloquium on the Dynamics of Explosions and Reactive Systems, Taipei, Taiwan, July 28-August 2, 2013.

Gao, Y., Mehrjoo, N., Ng, H.D., Lee, J.H.S., “Scaling Between the Minimum Diameter and Thickness for Detonation Limits in Highly Argon Diluted Mixtures”, Proceedings of the Canadian Section of the Combustion Institute Spring Technical Meeting, Laval University, Quebec, Canada, May 13-16, 2013.

LEE, T.

Journal Publications

Lee, T., Pereira, J., 2013, “Passive control of unsteady-wing tip vortex via a half-delta wing in both regular and reverse configurations”, Experiments in Fluids, Vol. 54, Issue 7, pp. 1564-1575.

Lee, T., Pereira, J., 2013, “Modification of static-wing tip vortex via a slender half-delta wing”, Journal of Fluids and Structures, Vol. 43, pp. 1-14.

LEGRAND, M.

Journal Publications

Jones, S., Legrand, M., 2013, “On solving one-dimensional partial differential equations with spatially dependent variables using the wavelet-Galerkin method”, Journal of Applied Mechanics, 80(6).

Salvat, N., Batailly, A., Legrand, M., 2013, “Modeling of abradable coating removal in aircraft engines through delay differential equations”, ASME Journal of Engineering for Gas Turbines and Power, 135(10).

Batailly, M. Cuny, Legrand, M., Philippon, S., 2013, “Numerical-experimental confrontation in the simulation of tool/abradable material interaction”, ASME Journal of Engineering for Gas Turbines and Power, 135(6).

Conference Proceedings

Meingast, M., Batailly, A., Legrand, M., Pierre, C., “Rotor/stator interaction within a helicopter engine”, Proceedings of the Nonlinear Dynamics in Engineering: Modelling, Analysis and Applications conference, Aberdeen, Scotland, August 21-24, 2013

Meingast, M., Batailly, A., Legrand, M., Ousty, J-P., “A qualitative numerical analysis of rotor-casing interactions in the centrifugal compressor of a helicopter engine”, Proceedings of ASME IDETC 2013, Portland, USA, August 4-7, 2013

Batailly, A., Meingast, M., Legrand, M., Ousty, J-P., “Rotor-stator interaction scenarios for the centrifugal compressor of a helicopter engine”, Proceedings of ASME/IGTI IDETC 2013, Portland, USA, August 4-7, 2013

Meingast, M., Legrand, M., “LCP formulation for solving forced periodic unilateral contact problems”, Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, Montréal, Québec, Canada, July 23-26, 2013

Meingast, M., Batailly, A., Legrand, M., Ousty, J-P. , “Investigation of rotor-casing interactions in the centrifugal compressor of a helicopter engine”, Proceedings of ASME/IGTI Turbo Expo 2013, San Antonio, USA, June 3–7, 2013

Salvat, N., Batailly, A., Legrand, M., “Modeling of abradable coating removal in aircraft engines through delay differential equations”, Proceedings of ASME/IGTI Turbo Expo 2013, San Antonio, USA, 3–7 June, 2013, (Structures & Dynamics Committee 2013 Turbo Expo Best Paper Award)

Salvat, N., Batailly, A., Legrand, M., « Modélisation de l’enlèvement de matériau abradable à l’aide d’équations différentielles à retard », Actes du 11e Colloque National en Calcul des Structures, Giens, France, 13–17 mai 2013

LESSARD, L.

Journal Publications

Phillips, Steven, Baets, Joris, Lessard, Larry, Hubert, Pascal and Verpoest, Ignaas., 2013, “Characterization of flax/epoxy prepregs before and after cure”, J. of Reinforced Plastics and Composites, Vol. 32, pp. 777-785.

Taghvaeipour. Afshin, Angles, Jorge, Lessard, Larry, 2013, “Constraint-wrench Analysis of Robotic Manipulators”, Multibody System Dynamics 2013, Vol. 29, No.2, pp. 139-168.

Fayazbakhsh, Kazem, Arian Nik, Mahdi, Pasini, Damiano, Lessard, Larry, 2013, “Defect Layer Method to Capture Effect of Gaps and Overlaps in Variable Stiffness Laminates made by Automated Fiber Placement“, Composite Structures 2013, Vol. 97, pp. 245-251.

Conference Proceedings

Phillips, Steven and Lessard, Larry, “Characterization of Flax Fabrics for Application in the Resin Infusion Process”, Composites Week in Leuven Conference, Leuven, Belgium, September 16-20, 2013.

Selezneva, Marina, Dodji, Kouwonou, Lessard, Larry and Hubert, Pascal, “Mechanical Properties of Randomly Oriented Strand (ROS) Thermoplastic Composites”, ICCM 19th International Conference on Composite Materials, Montreal, Canada, July 28 -August 2, 2013.

Damodaran, Ajith, Lessard, Larry and Annamalai, Sureshibabu, “Design, Manufacturing and Testing of a Cylindrical Drum-shell using a Sandwich Structure”, ICCM 19th International Conference on Composite Materials, Montreal, Canada, July 28 -August 2, 2013.

Fayazbakhsh, Kazem, Arian Nik, Mahdi, Pasini, Damiano, Lessard, Larry, Chen, Jihua and Yousefpour, Ali, “Design and Manufacturing of Optimum Variable Stiffness Laminates”, ICCM 19th International Conference on Composite Materials, Montreal, Canada, July 28 -August 2, 2013.

Phillips, Steven, Lessard, Larry Hubert, Pascal, Kuo, Peiyu and Sain, Mohini, “Development of Multi-Scale Biocomposites from Flax and Nanocellulose by Resin Infusion”, ICCM 19th International Conference on Composite Materials, Montreal, Canada, July 28 -August 2, 2013.

Fayazbakhsh, Kazem, Arian Nik, Mahdi, Pasini, Damiano, Lessard, Larry, Chen, Jihua and Yousefpour, Ali, “Sensitivity of Pareto Front Solutions to the Presence of Manufacturing Defects in Variable Stiffness Composite Design”, ICCS 17th International Conference on Composite Structures, Porto, Portugal, June 17-21, 2013.

Arian Nik, Mahdi, Fayazbakhsh, Kazem, Pasini, Damiano, Lessard, Larry, Chen, Jihua and Yousefpour, Ali, “Comparison of Surrogate Models for Design and Optimization of Variable Stiffness Composites”, ICCS 17th International Conference on Composite Structures, Porto, Portugal, June 17-21, 2013.

Arian Nik, Mahdi, Fayazbakhsh, Kazem, Pasini, Damiano, Lessard, Larry, “Optimization of Variable Stiffness Laminates with the Presence of Manufacturing Defects Induced by Automated Fiber Placement Machines”, First International Symposium on Automated Composites Manufacturing, Concordia University, Montreal, Quebec, Canada, April 11-12, 2013.

Fayazbakhsh, Kazem, Nik, Mahdi Arian, Lessard, Larry and Pasini, Damiano, “A Toolbox for Analyzing the Effect of Automated Fiber Placement Induced Defects on the Structural Performance of Composite Laminates”, First International Symposium on Automated Composites Manufacturing, Concordia University, Montreal, Quebec, Canada, April 11-12, 2013.

Phillips, Steven, Kuo, Pei-Yu, Demaria, Christian Lessard, Larry, Yan, Ning, Hubert, Pascal, Sain, Mohini, “Development of multi-scale biocomposites from flax, nanocellulose and epoxy by resin infusion”, NIPMMP Annual Scientific Conference, Montreal, Canada, June 11-2, 2013.

Damadoran, Ajith, Mansour, Hossein, Lu, Ye and Lessard, Larry, “Application of Composite Material to the Chenda, and Indian Percussion Instrument”, CIRMMT Symposium, Montreal, Quebec, Canada, May 23, 2013.

Bodjona, Kobye and Lessard, Larry, “Design of Composite Bolted and Bonded Hybrid Joints”, CRIAQ Bombardier Symposium, Montreal, Quebec, Canada, May 16, 2013.

Selezneva, Marina, Landry, Benoit, Huber, Pascal and Lessard, Larry, “Mechanical Characterization of Randomly-Oriented Strands Thermoplastic Composites”, Poster at the ASM International Student Night, Montreal, Quebec, Canada, February 21, 2013.

LIU, Xinyu

Journal Publications

Zhao, C., Thuo, M., Liu, X.Y., 2013, “A microfluidic paper-based electrochemical biosensor array for multiplexed detection of metabolic biomarkers”, Invited article, Science and Technology of Advanced Materials, Vol. 14, No. 5, 054402 (7pp), 2013. (impact factor: 3.8)

Li, X., Zwanenburg, P., Liu, X.Y., 2013, “Magnetic timing valves for fluid control in paper-based microfluidics”, Lab on a Chip, Vol. 13, No. 13, pp. 2609–2614. (impact factor: 5.7)

Book Chapters

Liu, X.Y., Sun, Y., 2013, “Microfluidic devices for automated micro-robotic cell injection and trapping”, Microfluidic Devices for Biomedical Applications, eds. Li, J. X., Zhou, Y., invited chapter, pp. 351-362

Conference Proceedings

Liu, X.Y., Shi, J.Y., Sun, Y., Wan, K.T., “Mechanical characterization of mouse oocytes”, The 50th Annual Technical Meeting of Society of Engineering Science, Providence, RI, July 28-31, 2013.

Liu, X.Y., “Paper-based microfluidic biosensors”, Abstract of invited special lecture, Microfluidics and Lab-on-a-Chip Symposium, Annual Meeting of Canadian Chemistry Society, Quebec City, May 26-31, 2013.

Zhao, C., Liu, X.Y., “Paper-based electrochemical sensor array for multiplexed disease-marker detection”, The 7th International Conference on Microtechnologies in Medicine and Biology (MMB’13), Marina Del Rey, LA, April 10–12, 2013.

Li, X., Liu, X.Y., “Fabrication of three-dimensional microfluidic channels in single layer of cellulose paper”, International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS’13), Freiburg, Germany, October 27–31, 2013.

Zhao, C., Thuo, M., Liu, X.Y., “A paper-based microfluidic device for multiplexed electrochemical detection of biomarkers”, International Conference on Manipulation, Manufacturing, and Measurement on the Nanoscale (3M-NANO), Suzhou, China, August 26–30, 2013. (Best Application Paper Award Finalist)

Zwanenburg, P., Li, X., Liu, X.Y., “Magnetic valves with programma3.ble timing capability for fluid control in paper-based microfluidics”, IEEE International Conference on Micro Electro Mechanical Systems (MEMS’13), Taipei, Waiwan, January 20–24, 2013. (oral presentation, selection rate: 8%)

MISRA, A.K.

Journal Publications

Woo, P., Misra, A.K., 2013, “Mechanics of very long tethered systems”, Acta Astronautica, Vol. 87, pp. 153 - 162.

Aslanov, V.S., Ledkov, A.S., Misra, A.K., Guerman, A.D., 2013, “Dynamics of space elevator after rupture”, Journal of Guidance, Control, and Dynamics, Vol. 36, pp. 986 - 992.

Paak, M., Paidoussis, M.P., Misra, A.K., 2013, “Nonlinear dynamics and stability of cantilevered circular cylindrical shells conveying fluid”, Journal of Sound and Vibration, Vol. 332, pp. 3474 - 3498.

Woo, P., Misra, A.K., Keshmiri, M., 2013, “On the planar motion in the full two-body problem with inertial symmetry”, Celestial Mechanics and Dynamical Astronomy, Vol. 117, pp. 263 - 277.

Conference Proceedings

Kumar, K.D., Misra, A.K., Varma, S., Bellefeuille, F., “Maintenance of satellite formations using environmental forces”, 7th International Workshop on Satellite Constellations and Formation Flying, Lisbon, Portugal, March 13-15, 2013, Paper No. IWSCFF-2013-05-04.

Soltani, M., Keshmiri, M., Misra, A.K., “Dynamic analysis and control synthesis of a tethered space robot (TSR) system”, 29th International Symposium on Space Technology and Science, Nagoya, Japan, June 3-6, 2013.

Gattupalli, A., Shah, S.V., Krishna, K.M., Misra, A.K. “Control strategies for reactionless capture of an orbiting object using a satellite mounted robot”, Advances in Robotics 2013, Pune, India, July 4-6, 2013.

Shah, S.V., Sharf, I., Misra, A.K., “Reactionless path planning strategies for capture of tumbling objects in space using a dual-arm robotic system”, AIAA Guidance, Navigation and Control Conference, Boston, MA, August 19-22, 2013.

Woo, P., Misra, A.K., “Dynamics of a spacecraft in the vicinity of binary asteroids”, 64th International Astronautical Congress, Beijing, China, September 23-27, 2013, Paper No. IAC-13.C1.9.3.

Woo, P., Misra, A.K., “Energy considerations in the partial space elevator”, 64th International Astronautical Congress, Beijing, China, September 23-27, 2013, Paper No. IAC-13.D4.3.2.

Shah, S.V., Gattupalli, A., Misra, A.K., “Energy optimum reactionless path planning for capture of tumbling objects using a dual-arm robot”, Proceedings of the 16th National Conference on Machines and Mechanisms, IIT Roorkee, India, December 18-20, 2013, pp. 383-388.

MONGEAU, L.

Journal Publications

Najafiyazdi, A., Mongeau, L., 2013, “A Low-Dispersion and Low-Dissipation Implicit Runge-Kutta Scheme”, J. Computational Physics, Vol. 233, pp. 315-323

Chan, A., Mongeau, L., Kost, K., 2013, “Vocal fold vibration measurements using laser Doppler vibrometry”, J. Acoust. Soc. Am., Vol. 133, No. 3, pp. 1667-1676

Li, N.Y.K., Heris, H.K., Mongeau, L., 2013, “Current Understanding and Future Directions for Vocal Fold Mechanobiology”, J Cytol Molecul Biol, Vol.1, No.1, pp. 1-9

Kazemirad, S., Heris, H.K., Mongeau, L., 2013, “Experimental methods for the characterization of the frequency-dependent viscoelastic properties of soft tissues and materials”, J. Acoust. Soc. Am., Vol. 133, No. 5, pp. 3186-3197

Kazemirad, S., Mongeau, L., 2013, “Rayleigh wave propagation method for the characterization of layered biomaterials at high frequencies”, J. Acoust. Soc. Am., Vol. 133, No. 6, pp. 4332-4342

Lew, P.T., Najafi-Yazdi, A., Mongeau, L., 2013, “Unsteady numerical simulation of a round jet with impinging microjets for noise suppression”, J. Acoust. Soc. Am., Vol. 134, No. 3, pp. 1982-1989

Miri, A.K., Heris, H.K., Tripathy, U., Wiseman, P., Mongeau, L., 2013, “Microstructural characterization of vocal folds toward a strain-energy model of collagen remodeling”, Acta Biomateriala, Vol. 9, No. 8, pp. 7957-7967

Bakhshaei, H., Yang, J.C.W., Miri, A.K., Young, J., Mongeau, L., 2013, “Determination of Strain Field on the Superior Surface of Excised Larynx Vocal Folds Using Digital Image Correlation”, J. Voice, Vol. 27, No. 6, pp. 659-667

Heris, H.K., Miri, A.K., Tripathy, U., Barthelat, F., Mongeau, L., 2014, “Indentation of poroviscoelastic vocal fold tissue using an atomic force microscope”, J. Mech. Behavior of Biomedical Materials, Vol. 28, pp. 383-392

Bakhshaei, H., Moro, C., Kost, K., Mongeau, L., 2013, “Three dimensional reconstruction of human vocal folds and laryngeal cartilages using CT scan data”, J. Voice, Vol. 27, No. 6, pp. 769-777

Rivard, M., Couture, C.A., Miri, A.K., Laliberté, M., Bertrand-Grenier, A., Mongeau, L., Légaré, F., 2013, “Imaging the bipolarity of myosin filaments with interferometric second harmonic generation microscopy”, Biomedical Optics Express, Vol. 4, No. 10, pp. 2078-2086

Conference Proceedings

Habibi, K., Gong, H., Najafi-Yazdi, A., Mongeau, L., “Numerical Simulations of Sound Radiated from Internal Mixing Nozzles with Forced Mixers using the Lattice Boltzmann Method”, AIAA/CEAS Paper AIAA-2013-2143, 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany, May 27-29, 2013.

Armstrong, D., Najafi-Yazdi, A., Mongeau, L., Raymond, V., “Numerical Simulations of Flow over a Landing Gear with Noise Reduction Devices using the Lattice Boltzmann Method”, AIAA/CEAS Paper AIAA-2011-2114, 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany, May 27-29, 2013.

Lew, P.T., Najafi-Yazdi, A., Mongeau, L., Colavincenzo, S., Lapointe, R., Waller, G., “Unsteady Numerical Simulation of Slat Junction Noise”, AIAA/CEAS Paper AIAA-2011-2161, 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany, May 27-29, 2013.

Najafi-Yazdi, A., Mongeau, L., “Direct Computation of the Sound Radiated from a Diffusion Jet Flame using Large Eddy Simulations”, AIAA/CEAS Paper AIAA-2011-2198, 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany, May 27-29, 2013.

Najafi-Yazdi, A., Mongeau, L., “On the Sources of Jet Noise: a Numerical Study using Bandpass Filtering”, AIAA/CEAS Paper AIAA-2011-2233, 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany, May 27-29, 2013.

Rafat, Y., Habibi, K., Mongeau, L., “Direct numerical simulations of acoustic streaming in standing wave tubes using the Lattice Boltzmann Method”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013, Paper 1aPAa6. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3238, 2013. POMA 19, 045006

Habibi, K., Gong, H., Mongeau, L., “A robust numerical approach for prediction of turbofan engine noise”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013. Paper 3aNSb1. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3420, 2013. POMA 19, 040068

Armstrong, D., Mongeau, L., “Effects of a boundary layer trip in the prediction of noise from flow past tandem cylinders”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013, Paper 4pEAb9. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3546, 2013. POMA 19, 030112

Gong, H., Habibi, K., Mongeau, L., “Effects of scalloping depth on the sound generated by turbofan lobed mixers”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013. Paper 5aEA6. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3589, 2013. POMA 19, 030122

Bakhshaei, H., Yang, J.C.W., Miri, A.K., Mongeau, L., “Determination of the stresses and strain on the superior surface of excised porcine larynges using digital image correlation”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013. Invited Paper 5aSCa3. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3601, 2013. POMA 19, 060238

Kazemirad, S., Bakhshaei, H., Mongeau, L., Kost, K., “Non-invasive in-vivo measurement of the mechanical properties of human vocal fold tissue”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013. Paper 5pSC3. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3617, 2013. POMA 19, 060304

Li, Z., Bakhshaei, H., Helou, L., Li, N.Y.K., Mongeau, L., Kost, K., Rosen, C., Verdolini, K., “Evaluation of contact pressure in human vocal folds during phonation using high-speed videoendoscopy, electroglottography, and magnetic resonance imaging”, Proceedings of the 21th International Conference on Acoustics, Montreal, Canada, June 2-7, 2013. Paper 5pSC5. Abstract published in Journal of the Acoustical Society of America, Vol. 133(5), p. 3618, 2013. POMA 19, 060306

Kazemirad, S., Bakhshaei, H., Mongeau, L., Kost, K., “Wave method for the measurement of the shear modulus of soft tissue and biomaterials”, 19th Congress of the European Society of Biomechanics, Patras, Greece, August 25-28, 2013.

Miri, A.K., Li, L.X., Mongeau, L., “Fracture toughness of the vocal fold lamina propria”, 19th Congress of the European Society of Biomechanics, Patras, Greece, August 25-28, 2013.

Mongeau, L., Li, N.Y.K., Heris, H.K., “Study of vocal fold mechanobiology using an airflow-driven bioreactor”, 19th Congress of the European Society of Biomechanics, Patras, Greece, August 25-28, 2013.

Li, Y., Li, N.Y.K., Najafi Yazdi, A., Mongeau, L., “Implementation of agent based model of tissue inflammation on a graphics processing unit platform”, paper FMD2013-16131, ASME/FDA 2013 1st Annual Frontiers in Medical Devices: Applications of Computer Modeling and Simulation, College Park, Maryland, September 11-13, 2013.

MONGRAIN, R.

Journal Publications

Adelali M., Reiter S., Mongrain R., Bertrand M., L’Allier P.L., Kiritkou E.A., Tardif J.-C., December 2013, “Cap buckling as a potential mechanism of atherosclerotic plaque vulnerability: a numerical, experimental and analytical study with clinical preliminary insights”, J Mech Behav Mat, S1751-6161(13)00431-1, (available online: http://www.sciencedirect.com/science/article/pii/S1751616113004311)

Galaz R., Pagiatakis C., Gaillard E., Mongrain R., 2013, “A parameterized analysis of the mechanical stress for co-ronary plaque fibrous caps”, Journal of Biomedical Science and Engineering, (Special Issue on Modeling and Simulation in Tissue Biomechanics), doi: 10.4236/jbise.2013.612A006, 6(12A), 38-46

Al-Mangour B., Mongrain R., Yue S., 2013, “Coronary Stents Fracture: An Engineering Approach”, Materials Sciences and Applications, 4(10): 606-621, doi:10.4236/msa.2013.410075

Trapeaux J., Busseuil D., Shi Y., Nobari S., Shustik D., Mecteau M., El-Hamamsy I., Lebel M., Mongrain R., Rheaume E., Tardif J.-C., 2013, “Improvement of aortic valve stenosis by ApoA-I mimetic therapy is associated with decreased aortic root and valve remodeling in mice”, doi: 10.1111/bph.12236, Br J Pharmacol, 169(7):1587-99

Nobari S., Mongrain R., Leask R., Cartier R., 2013, “The effect of aortic wall and aortic leaflet stiffening on coronary hemodynamic: a fluid–structure interaction study”, Med Biol Eng Comput, 51(8):923-36, doi: 10.1007/s11517-013-1066-1

Chu B., Gaillard E., Mongrain R., Reiter S, Tardif J.C., 2013, “Characterization of fracture toughness exhaustion in pig aorta”, J Mech Behav Biomed Mater, 17:126-36, doi:10.1016/j.jmbbm.2012.08.007

Conference Proceedings

Shahmansouri N., Leask R., Mongrain R., “Damage model of porcine aortic tissue under cyclic loading”, Proceedings of the APCOM & ISCM 5th Asia Pacific Congress on Computational Mechanics & 4th International Symposium on Computational Mechanics, Abstract ID 1918, Singapore, 2013, (http://www.sci-en-tech.com/apcom2013/APCOM2013-Proceedings/Conference_Pr...)

Miri A.K., Chen L.X., Mongrain R., Mongeau L., “Fracture toughness of the vocal fold lamina propria”, Proceedings of the 19th Congress of the European Society of Biomechanics, Patras, Greece, 2013, p. 62, Abstract ID 129

Barua R., Aydin H., Sriraman K.R., Yue S., Frost D.L., Bertrand O.F, Mongrain R., “Static Immersion Testing of Degradable Implant Materials Using Cold Spray”, Proceedings of the 30th Annual Meeting of the Canadian Biomaterials Society, Ottawa, 2013, p. 23, Abstract ID 56, (http://www.biomaterials.ca/attachments/ProgramCBS2013AnnualMeeting.pdf)

Barua R., Mongrain R., Aydin H., Yue S., Bertrand O.F., Frost D.L., “Degradation behavior of nanostructured stent materials using cold spray”, Next Generation Biomaterials, Materials Science & Technology, Metals for Medical Applications, Montreal, 2013, (abstract available online: http://www.programmaster.org)

Barua R., Mongrain R., Aydin H., Yue S., Bertrand O.F., Frost D.L., “Degradation behavior of nanostructured stent materials using cold spray”, Proceedings of the ASME 2013 Summer Bioengineering Conference, Sunriver, Oregon, SBC, June 26-29, 2013, Paper # SBC2013-14662, (http://www.asmeconferences.org/SBC2013/SearchPaperSchedule.cfm)

Shahmansouri, N., Javid, F., Pasini, D., Angeles, J., Mongrain, R., “Investigation of the fatigue properties of mitral valve leaflets”, Proceedings of the ASME 2013 Summer Bioengineering Conference, Sunriver, Oregon, SBC, June 26-29, 2013, Paper # SBC2013-14758, (http://www.asmeconferences.org/SBC2013/SearchPaperSchedule.cfm)

Farhad J., Shahmansouri N., Mongrain R., Pasini D., Angeles J., “Characterization of toughness properties of mitral valve leaflets”, Proceedings of the ASME 2013 Summer Bioengineering Conference, Sunriver, Oregon, SBC, June 26-29, 2013, Paper # SBC2013-14738, (http://www.asmeconferences.org/SBC2013/SearchPaperSchedule.cfm)

Mohammadi H., Cartier R., Mongrain R., “Development of a 1D model for assessing the aortic pressure drop with viscosity and compliance”, Proceedings of the ASME 2013 Summer Bioengineering Conference, Sunriver, Oregon, SBC, June 26-29, 2013, Paper # SBC2013-14749, (http://www.asmeconferences.org/SBC2013/SearchPaperSchedule.cfm)

Shahmansouri S., Amabili M., Leask R., Mongrain R., “Investigation about the Damage Accumulation of Porcine Aortic Tissue under Fatigue Loading”, Proceedings of the The 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), McGill University, July 23-26, 2013, Paper ID 345-993

Barua R., Mongrain R., Aydin H., Yue S., Bertrand O.F., Frost D.L., “Corrosion rate assessment of degradable implant materials manufactured by cold spray”, Proceedings of the Semi-Annual Surftec Meeting, New Perspectives on Cold Spray Development and Laser Cladding Review, Montreal, June 2013

Azar T., Angeles J., Kovecses J., Mongrain R., Cecere R., “A novel percutaneous mitral repair technique”, McGill Cardiovascular Research Day (poster), 3rd place award, May 30, 2013

Wener E., Chung J., Mongrain R., Pressaco J., Cartier R., Lachapelle K., Leask R.L., “Biomechanics of the ascending aorta”, 15eme Rencontre Quebec-Ontario on Biotechnologies SCGCh, Universite Laval, Quebec, May 2013

MYDLARSKI, L.

Journal Publications

Khorsandi, B., Gaskin, S.J., Mydlarski, L., 2013, “Effect of background turbulence on an axisymmetric turbulent jet”, Journal of Fluid Mechanics, vol. 736, pp. 250-286. (37 pages)

Germaine, E., Mydlarski, L., Cortelezzi, L., 2013, “3DFLUX: A high-order, fully three-dimensional flux integral solver for the scalar transport equation”, Journal of Computational Physics, vol. 240, p. 121–144. (24 pages)

Conference Proceedings

Danaila, L., Mydlarski, L., “Transfer of passive scalar variance in decaying grid turbulence with a mean scalar gradient”, 66th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, San Diego, 24-26, November, 2013, (Bulletin of the American Physical Society, Volume 58, No. 18, p. 238)

Mydlarski, L., Meyer, C., Danaila, L., “Measurement and analysis of incremental averages of passive scalar statistics in grid turbulence”, Fourteenth European Turbulence Conference, Lyon, France, 1-4 September, 2013, (http://etc14.ens-lyon.fr/openconf/modules/request.php?module=oc_program&...)

Afara, S., Medvescek, J., Mydlarski, L., Baliga, B.R., MacDonald, M., “Development of a wall-shear-stress sensor and measurements in mini-channels with blockages”, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisbon, Portugal, 16-20 June, 2013, (Proceedings of the 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics (8 pages))

Mydlarski, L., “Péclet number effects: Ramifications for both fundamental and applied statistics in turbulent flows”, Second ERCOFTAC SIG44 Workshop – “Turbulent flows: fundamentals and applications”, Poitiers, France, 15-16 April, 2013, (https://workspace.imperial.ac.uk/tmfc/Public/POITIERS2013/MYDLARSKI.pdf)

NADARAJAH, S.

Journal Publications

Mosahebi, A., Nadarajah, S., April, 2013, “An Adaptive Non–Linear Frequency Domain Method for Viscous Periodic Steady State Flows”, Computers and Fluids, Elsevier, Vol. 75. pg. 140-154

Walther, B., Nadarajah, S., April, 2013, “Constrained Adjoint-Based Aerodynamic Shape Optimization of a Single-Stage Transonic Compressor”, ASME Journal of Turbomachinery, Vol. 135

Khayatzadeh, P., Nadarajah, S., April, 2013, “Laminar-Turbulent Flow Simulation for Wind Turbine Profiles using the γ − Reθ Transition Model”, Wind Energy, Wiley, [DOI: 10.1002/we.1606]

Cagnone, J.S., Vermier, B., Nadarajah, S., January, 2013, “A p-Adaptive Scheme for the Lifting Collocation Penalty Formulation for Viscous Flows”, Journal of Computational Physics, Elsevier, Volume 233, pg. 324-338

Conference Proceedings

Walther, B., Nadarajah, S., “An Adjoint-Based Optimization Method for Multistage Turbomachines”, International Society of Airbreathing Engines ISABE 2013-1118, Busan, South Korea, September, 2013.

Paul-Dubois-Taine, A., Nadarajah, S., “Sensitivity-Based Sequential Sampling of Cokriging Response Surfaces for Aerodynamic Data”, 31st AIAA Applied Aerodynamics Conference, San Diego, CA, June, 2013.

Bisson, F., Nadarajah, S., “Adjoint-Based Aerodynamic Design Optimization using the Drag Decomposition Method”, 31st AIAA Applied Aerodynamics Conference, San Diego, CA, June, 2013.

Vermeire, B., Nadarajah, S., “Adaptive IMEX Time-Stepping for the Correction Procedure via Reconstruction Scheme”, 21st AIAA Computational Fluid Dynamics Conference, San Diego, CA, June, 2013.

Cagnone, J.S., Nadarajah, S., “An error-norm oriented adaptation procedure for the discontinuous Galerkin method”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, May, 2013.

Vermier, B., Nadarajah, S., “Adaptive IMEX Time-Stepping for ILES Using the Correction Procedure via Reconstruction Scheme”, 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, May, 2013.

Walther, B., Nadarajah, S., “An Adjoint-Based Optimiation Method for 3D Multistage Turbomachines”, 60th CASI Aeronautics Conference, Toronto, ON, April, 2013.

Bisson, F., Nadarajah, S., “Adjoint-Based Aerodynamic Design Optimization using the Drag Decomposition Method”, 60th CASI Aeronautics Conference, Toronto, ON, April, 2013.

Paul-Dubois-Taine, A., Nadarajah, S., “Sensitivity-Based Sequential Sampling of Cokriging Response Surfaces for Aerodynamic Data”, 60th CASI Aeronautics Conference, Toronto, ON, April, 2013.

Cagnone, J-S., Nadarajah, S., “A Polynomial Adaptive LCP Scheme for Viscous Compressible Flows”, AIAA Aerospace Sciences Meeting, Dallas/Ft. Worth, TX, January, 2013.

Vermeire, B., Cagnone, J-S., and Nadarajah, S., “ILES Using the Correction Procedure via Reconstruction Scheme”, AIAA Aerospace Sciences Meeting, Dallas/Ft. Worth, TX, January, 2013.

Mosahebi Mohamadi, A., Nadarajah, S., “Algorithmic Advancements for the Adaptive Non-Linear Frequency Domain Method”, AIAA Aerospace Sciences Meeting, Dallas/Ft. Worth, TX, January, 2013

Walther, B., Nadarajah, S., “An Adjoint-Based Optimization Method for Multistage Turbomachines”, SAE Conference, Montreal, QC, September, 2013.

Bisson, F., Nadarajah, S., “Adjoint-Based Aerodynamic Design Optimization using the Drag Decomposition Method”, SAE Conference, Montreal, QC, September, 2013.

NAHON, M.

Journal Publications

Liesk, T., Nahon, M., Boulet, B., 2013, “Design and Experimental Validation of a Non-linear Low-level Controller for an Unmanned Finless Airship”, IEEE Transactions on Control Systems Technology, Vol. 21, No. 1, pp. 149-161.

Masciola, M., Nahon, M., Driscoll, F., 2013, “Preliminary Assessment of the Importance of Platform–Tendon Coupling in a Tension Leg Platform”, ASME Journal of Offshore Mechanics and Arctic Engineering, Vol. 135, No. 3, 11 pages.

Chiu, O., Nahon, M., Plamondon, N., 2013, “Stability Augmentation and Fault Tolerance for a Hexapod Underwater Vehicle”, Marine Engineering Frontiers, Vol. 1, No. 1, pp. 1-12.

Khan, W., Nahon, M., 2013, “Toward an Accurate Physics-Based UAV Thruster Model”, IEEE/ASME Transactions on Mechatronics, Vol. 18, No. 4, pp. 1269-1279.

Plamondon, N., Nahon, M., 2013, “Adaptive Controller for a Biomimetic Underwater Vehicle”, Journal of Unmanned Vehicle Systems, Vol. 1, No. 1, pp. 1-13.

Conference Proceedings

Nahon, M., Mazhar, H., Liesk, T., “Validation of a Dynamics Model and Controller for an Umanned, Finless Airship”, AIAA Lighter-than-Air Conference, Daytona Beach, March 25-28, 2013

Khan, W., Nahon, M., “Dynamic Modeling of a Highly-Maneuverable Fixed-Wing UAV”, CASI Aero 2013, Toronto, Apr 30-May 2, 2013.

Khan, W., Nahon, M., “Propeller Slipstream Model for Small Unmanned Aerial Vehicles”, AIAA Modeling and Simulation Technologies Conference, Boston, Aug. 19-23, 2013 (Winner of Best Paper Award)

PAÏDOUSSIS, M.

Journal Publications

Ghayesh, M.H., Amabili, M., Paidoussis, M.P., 2013, "Nonlinear Dynamics of Axially Moving Plates", Journal of Sound of Sound and Vibration, 332, 391-406.

Paak, M., Paidoussis, M.P., Misra, A.K., 2013, "Nonlinear dynamics and stability of cantilevered circular cylindrical shells conveying fluid", Journal of Sound and Vibration, 332, 3474-3498.

Kheiri, M., Paidoussis, M.P., Amabili, M., 2013, "A nonlinear model for a towed flexible cylinder", Journal of Sound and Vibration, 332, 1789-1806.

Kheiri, M., Paidoussis, M.P., Amabili, M., Epureanu, B.I., 2013, "Three-dimensional dynamics of long pipes towed underwater. Part 1: The equations of motion", Ocean Engineering, 64, 151-160.

Kheiri, M., Paidoussis, M.P., Amabili, M., Epureanu, B.I., 2013, "Three-dimensional dynamics of long pipes towed underwater. Part 2: Linear dynamics", Ocean Engineering, 64, 161-173.

Modarres-Sadeghi, Y., Paidoussis, M.P., 2013, "Chaotic oscillations of long pipes conveying fluid in the presence of a large end-mass", Computers and Structures, 122, 192-201.

Shen, H., Wen, J., Paidoussis, M.P., Yu, D., Cai, L., Wen, X., 2013, "Parameter derivation for an acoustic cloak based on scattering theory and realization with tunable metamaterials", Modeling and Simulation in Materials Science and Engineering, 21, 06501.

Ghayesh, M.H., Paidoussis, M.P., Amabili, M., 2013, "Nonlinear dynamics of cantilevered extensible pipes conveying fluid", Journal of Sound and Vibration, 332, 6405-6418.

PASINI, D.

Journal Publications

Faisal, T.R., Rey, A., Pasini, D., 2013, “A Multiscale Mechanical Model for Plant Tissue Stiffness”, Multiscale Simulations in Soft Matters (special issue of Polymers), Vol. 5 (2), pp. 730-750

Khanoki, S. A., Pasini, D., 2013, “The Fatigue Design of a Bone Preserving Hip Implant with Functionally Graded Cellular Material”, ASME Journal of Medical Devices, Vol. 7(2), 020908

Khanoki, S. A., Pasini, D., 2013, “Mechanical properties of planar lattice materials via asymptotic homogenization and comparison with alternative homogenization methods”, International Journal of Mechanical Science, Vol 77, pp.249–262

Khanoki Sajad A., Pasini, D., 2013, “Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem”, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 22, pp. 65-83

Vigliotti A., Pasini, D., 2013, “Mechanical properties of hierarchical lattices”, Journal of Mechanics of Materials, vol. 62, pp 32-43

Khalil Abad, E.M., Khanoki Sajad, A., Pasini, D., 2013, “Fatigue design of lattice materials via computational mechanics: application to lattices with smooth transitions in cell geometry”, International Journal of Fatigue, vol 47, pp. 126-136

Murugesan, Y., Pasini, D., Rey, A.D., 2013, “Defect Textures in Polygonal Arrangements of Cylindrical Inclusions in Cholesteric Liquid Crystal Matrices”, Soft Matter, Vol. 9, (4), pp. 1054-1065

Visweswaraiah, S. B., Ghiasi, H., Pasini, D., Lessard, L., 2013, “Multi-objective Optimization of a Composite Rotor Blade Cross-section”, Composites Structures, Vol. 96, pp. 75-81

Fayazbakhsh, K., Arian Nik, M., Pasini, D., Lessard, L., 2013, “Defect layer method to capture effect of gaps and overlaps in variable stiffness laminates made by Automated Fiber Placement”, Composites Structures, Vol. 97, pp. 245-251

Conference Proceedings

Khanoki, S. A., Pasini, D., “A mechanically biocompatible cellular material for hip replacement implants”, MRS meeting, Boston, USA, Dec 1-6, 2013.

Faragalli, M., Pasini D., “Multi-Objective Optimization of Non-Pneumatic Compliant Cellular Wheels”, MRS Meeting, Boston, USA, Dec 1-6, 2013.

Faisal, T.R., Pasini, D., “A Multi-scale Model for the Turgor-driven Stiffness of Plant Tissue”, ASME International Mechanical Engineering Congress and Exposition, San Diego, CA, Nov. 15-21, 2013

Faragalli, M., Pasini D., “Optimum Design of Cellular Wheels for Lunar Rovers”, International Mechanical Engineering Congress and Exposition, San Diego, CA, Nov. 15-21, 2013

Fayazbakhsh, K., Mahdi Arian Nik, Pasini, D., Lessard, “Optimization of variable stiffness laminates with the presence of manufacturing defects induced by Automated Fiber Placement machines”, 1st International Symposium on Automated Composites Manufacturing, Montreal, April 11-12, 2013

Fayazbakhsh, K., Mahdi Arian Nik, Pasini, D., Lessard, “A toolbox for analyzing the effect of Automated Fiber Placement induced defects on the structural performance of composite laminates”, 1st International Symposium on Automated Composites Manufacturing, April 11-12, 2013

Vigliotti, A., Pasini, D., “A nonlinear constitutive model for lattice materials”, Canadian Conference on Nonlinear Solid Mechanics, Montreal, July 19-24, 2013

Fayazbakhsh, K., Mahdi Arian Nik, Pasini, D., Lessard, “Design and Manufacturing of Optimum Variable Stiffness Laminates”, 19th International Conference on Composite Materials (ICCM19), Montreal, July 28 - August 2, 2013

Fayazbakhsh, K., Mahdi Arian Nik, Pasini, D., Lessard, “Comparison of surrogate models for design and optimization of variable stiffness composites”, 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June, 2013

Fayazbakhsh, K., Mahdi Arian Nik, Pasini, D., Lessard, “Sensitivity of Pareto front solutions to the presence of manufacturing defects in variable stiffness composite design”, 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June, 2013

Shahmansouri, N., Javid, F., Pasini, D., Angeles, J., Amabili, M., Mongrain, R., “Investigation of the Fatigue Properties of Mitral Valve Leaflets”, ASME 2013 Summer Bioengineering Conference, Sunriver, Oregon, June 26-29, 2013

Khanoki, S. A., Pasini, D., “A Mechanically Biocompatible Implant for Hip Replacement via Multiobjective Optimization of Material Properties”, 10th World Congress on Structural and Multidisciplinary Optimization, Orlando, Florida, USA, May 19-24, 2013

SHARF, I.

Journal Publications

Nguyen Huynh, T., Sharf, I., 2013, "Adaptive Reactionless Motion and Parameter Identification in Post-capture of Space Debris", Journal of Guidance, Control, and Dynamics, 36, pp. 404-414

Persson, S.M., Sharf, I., 2013, "Invariant Trapezoidal Kalman Filter for Application to Attitude Estimation", AIAA Journal of Guidance, Control and Dynamics, 36(3), pp. 721-733

Harmat, A., Trentini, M., Sharf, I., 2013, "Jumping Behaviour for a Wheeled Quadruped Robot: Simulation and Experiments", Journal of Unmanned Vehicle Systems, 1(1), pp. 41-60

Conference Proceedings

Shah, S., Sharf, I., Misra, A.K., “Reactionless Path Planning Strategies for Capture of Tumbling Objects in Space Using a Dual-Arm Robotic System”, Proc. AIAA Guidance, Navigation, and Control Conference, Boston, Massachusetts, United States, August 19-22, 2013.

Rikovitch, N., Sharf, I., “Kinodynamic Motion Planning for UAVs: A Minimum Energy Approach”, Proc. AIAA Guidance, Navigation and Control Conference, Boston, Massachusetts, United States, August 19-22, 2013.

Persson, S.M., Sharf, I., “Steady-state Invariant Kalman Filter for Attitude and Imbalance Estimation of a Neutrally-buoyant Airship”, Proc. AIAA Guidance, Navigation, and Control Conference, Boston, Massachusetts, United States, August 19-22, 2013.

TIMOFEEV, E.

Conference Proceedings

Ogawa, H., Molder, S., Timofeev, E., “Numerical Investigation of Mach Reflection Hysteresis in Stunted Busemann Intakes for Axisymmetric Scramjet Engines”, Proc. of the 10th International Conference on Flow Dynamics, Sendai, Japan, November 25-27, 2013 (2 pages).

Timofeev, E., Hakkaki-Fard, A., Kleine, H., and Skews, B., “On the Influence of Reynolds Number on the Mach Stem Height at Shock Reflection from a Circular Cylinder”, Proceedings of the 29th International Symposium on Shock Waves, Madison, WI, USA, July 14-19, 2013, Paper 0246-000123 (6 pages).

Moradian, N., Timofeev, E., Tahir, R., Molder, S., “On the Self-Starting Constraints for Busemann Intakes with Overboard Spillage”, Proceedings of the 29th International Symposium on Shock Waves, Madison, WI, USA, July 14-19, 2013, Paper 0246-000333 (6 pages).

Ogawa, H., Molder, S., Timofeev, E., Boyce, R., “Startability and Mach Reflection Hysteresis of Shortened Busemann Intakes for Axisymmetric Scramjet Engines”, Proceedings of the 29th International Symposium on Shock Waves, Madison, WI, USA, July 14-19, 2013, Paper 0246-000197 (6 pages).

Timofeev, E., Hakkaki-Fard, A., Kleine, H., Skews, B., “On the Influence of Reynolds Number on the Mach Stem Height at Shock Reflection from a Circular Cylinder”, In: Book of Abstracts of the 29th International Symposium on Shock Waves, Madison, WI, USA, July 14-19, 2013, p. 91.

Moradian, N., Timofeev, E., “Numerical Study of Self-Starting Limits for Busemann Intakes with Overboard Mass Spillage”, In: Book of Abstracts of the 29th International Symposium on Shock Waves, Madison, WI, USA, July 14-19, 2013, p. 265.

Ogawa, H., Molder, S., Timofeev, E., Boyce, R., “Startability of Wave-Capturing Scramjet Intakes”, In: Book of Abstracts of the 29th International Symposium on Shock Waves, Madison, WI, USA, July 14-19, 2013, p. 155.

Moradian, N., Timofeev, E., Tahir, R., Molder, S., “Numerical Experiments on Self-Starting of Busemann Intakes with Overboard Spillage”, Proceedings of the 21st Annual Conference of the CFD Society of Canada, Sherbrooke, QC, May 6-9, 2013, Paper 111 (8 pages).

VENGALLATORE, S.

Journal Publications

Nourmohammadi, Z., Prabhakar, S., Vengallatore, S., 2013, "Thermoelastic damping in layered microresonators: critical frequencies, peak values, and rule-of-mixture", IEEE/ASME Journal of Microelectromechanical Systems, vol. 22(3), pp. 747-754

Book Chapters

Dompierre, A., Vengallatore, S., Frechette, L., "Power Density Limits and Benchmarking of Resonant Piezoelectric Vibration Energy Harvesters", Novel Advances in Microsystems Technologies and Their Applications, ed. Francis, L., Iniewski, K., CRC Taylor and Francis, July, 2013, pp. 293-334

Dompierre, A., Vengallatore, S., Frechette, L., "Piezoelectric Vibration Energy Harvesters: Modeling, Design, Limits, and Benchmarking", Energy Harvesting with Functional Materials and Microsystems, ed. Bhaskaran, M., Sriram, S., Iniewski, K., CRC Taylor and Francis, November, 2013.

Conference Proceedings

Joshi, S., Hung, S., Sosale, G., Vengallatore, S., Damping in micro and nanomechanical resonators: mechanisms, models, and design, Proceedings of the 10th International Workshop on Nanomechanical Sensing Workshop, Stanford University, Stanford, CA, USA, May 2013, pp.11-14

ZHAO, Y.F.

Journal Publications

Hardwick, M., Zhao,Y.F., Proctor, F.M., et al., 2013, “A Roadmap for STEP-NC Enabled Interoperable Manufacturing”, International Journal of Advanced Manufacturing Technology, Vol. 68, Issue 5-8, pp 1023-1037

Conference Proceedings

Zhao, Y.F., Perry, N., Andriankaja, H., “A Manufacturing Informatics Framework for Manufacturing Sustainability Assessment”, 20th CIRP Conference on Life Cycle Engineering LCE 2013, Singapore, April 17-19, 2013.

Main navigation

Publications 2013

AMABILI, M.

Journal Publications

Conference Proceedings

ANGELES, J.

Journal Publications

Book Chapters

Conference Proceedings

BALIGA, B.R.

Journal Publications

Conference Proceedings

BARTHELAT, F.

Journal Publications

Book Chapters

Conference Proceedings

BERGTHORSON, J.M.

Journal Publications

Conference Proceedings

CORTELEZZI, L.

Journal Publications

Conference Proceedings

FROST, D.L.

Journal Publications

Conference Proceedings

HABASHI, W.G.

Journal Publications

Conference Proceedings

HIGGINS, A.J.

Journal Publications

Conference Proceedings

HUBERT, P.

Journal Publications

Book Chapters

Conference Proceedings

KOKKOLARAS, M.

Journal Publications

Conference Proceedings

KÖVECSES, J.

Journal Publications

Conference Proceedings

LEE, J.H.S.

Journal Publications

Conference Proceedings

LEE, T.

Journal Publications

LEGRAND, M.

Journal Publications

Conference Proceedings

LESSARD, L.

Journal Publications

Conference Proceedings

LIU, Xinyu

Journal Publications

Book Chapters

Conference Proceedings

MISRA, A.K.

Journal Publications

Conference Proceedings

MONGEAU, L.

Journal Publications

Conference Proceedings

MONGRAIN, R.

Journal Publications

Conference Proceedings

MYDLARSKI, L.

Journal Publications

Conference Proceedings

NADARAJAH, S.

Journal Publications

Conference Proceedings

NAHON, M.

Journal Publications

Conference Proceedings

PAÏDOUSSIS, M.

Journal Publications

PASINI, D.

Journal Publications

Conference Proceedings

SHARF, I.