Amabili | Angeles | Baliga | Bergthorson | Cortelezzi | Fried | Frost | Habashi | Higgins | Hubert | Kovecses | Lee J.H.S. | Lee T. | Lessard | Mongeau | Mongrain | Mydlarski | Nadarajah | Nahon | Paidoussis | Pasini | Radziszewski | Sharf | Timofeev | Vengallatore | Zsombor-Murray |
ANGELES, J.
Books
Angeles, J., 2007, Fundamentals of Robotic Mechanical Systems, Third Edition Springer, New York (First edition published in 1997.)
Journal Publications
Modarres Najafabadi, S. A., Kövecses, J. and Angeles, J., 2007, ``Energy analysis and decoupling in three-dimensional impacts of multibody systems'', ASME Journal of Applied Mechanics, Vol. 74. pp. 845--851.
Kövecses, J. and Angeles, J., 2007, ``The stiffness matrix in elastically articulated rigid-body systems'', Multibody System Dynamics, Vol. 18, pp. 169--184.
Larochelle, P., Murray, A. and Angeles, J., 2007, ``A distance metric for finite sets of rigid-body displacements via the polar decomposition'', Journal of Mechanical Design, Vol. 129, pp. 883--886.
Chen, C., Zhang, X. and Angeles, J., 2007, ``Kinematic and geometric analysis of a pure-rolling epicyclic train'', Journal of Mechanical Design, Vol. 129, No. 8, pp. 852--857.
Nasrallah, D., Angeles, J. and Michalska, H., 2007, ``Controllability and Posture Control of a Wheeled Pendulum Moving on an Inclined Plane'' IEEE Transactions on Robotics, Vol. 23, No. 3, pp. 564--577.
Figliolini, G., Stachel, H. and Angeles, J., 2007, ``A new look at the Ball-Disteli diagram and its relevance to spatial gearing'', Mechanism and Machine Theory, Vol. 42. pp. 1362--1375.
Chen, C., and Angeles, J., 2007, ``Generalized transmission index and transmission quality for spatial linkages'', Mechanisms and Machine Theory, Vol. 42, pp. 1225--1237.
Theingin, Chen, I.-M., Angeles, J. and Li, C., 2007, ``Management of parallel-manipulator singularities using joint-coupling'', Advanced Robotics, Vol. 21, No. 5--6, pp. 583--600.
Salerno, A. and Angeles, J., 2007, ``A new family of two-wheeled mobile robots: modeling and controllability'', IEEE Transactions on Robotics, Vol. 23, No. 1, pp. 169--173.
Chen, C. and Angeles, J., 2007, ``Virtual-power flow and mechanical gear-mesh power losses of epicyclic gear trains'', Journal of Mechanical Design, Vol. 129, pp. 107--113.
Chen, C. and Angeles, J., 2007, ``Optimum kinematics design of drives for wheeled mobile robots based on cam-roller pairs'', Journal of Mechanical Design, Vol. 129, pp. 7--16.
Morozov, A. and Angeles, J., 2007, ``The mechanical design of a novel Schönflies-motion generator'', Robotics and Computer-Integrated Manufacturing, Vol. 23, pp. 82--93.
Refereed Conference Proceedings
Salerno, A. and Angeles, J., 2007, ``Robustness and controllability analysis for autonomous navigation of two-wheeled mobile robots'', Proc. of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2007-34415, Las Vegas, Nevada, USA, Sept. 4--7.
Modarres Najafabadi, S .A., Kövecses, J. and Angeles, J., 2007, ``An energy-based approach to the dynamics of impacts in unilaterally-constrained multibody systems'', 2007, ASME International Design Engineering Technical Conferences, 6th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Paper #: DETC2007-35736, Las Vegas, Nevada, USA,Sept. 4--7.
Bouyer, E., Caro, S., Chablat, D. and Angeles, J., 2007, ``The multiobjective optimization of a prismatic drive'', 2007, Proc. of ASME International Design Engineering Technical Conferences Computers and Information in Engineering Conference, DETC2007-34795, Las Vegas, Nevada, USA,Sept. 4--7.
Chen, C. and Angeles, J., 2007, ``Design of wheeled mobile robots with advanced drives'', Proc. of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2007-34178, Las Vegas, Nevada, USA,Sept. 4--7.
Khan, W.A., Caro, S., Angeles, J. and Pasini, D., 2007, ``A formulation of complexity-based rules for the preliminary design stage of robotic architectures,'' Proc. Int. Conf.Engineering Design, ICED '07, Paris, August 28--31.
Khan, W. A., Zhuang, H., and Angeles, J., 2007, ``RVS4W: A visualization tool for robot design'', Proc. CDEN/C2E2 2007 Conference, Winnipeg, Alberta, July 22--24.
Khan, W. A. and Angeles, J., 2007 ``The role of entropy in design theory and methodology'', Proc. CDEN/C2E2 2007 Conference, Winnipeg, Alberta, July 22--24.
Modarres Najafabadi, S. A., Kövecses, J. and Angeles, J.,2007, ``Dynamic analysis of multiple- point impacts in multibody systems'', Proc. of ECCOMAS Thematic Conference on Multibody Dynamics, Milano, pp. 419--420, Italy, June 25--28.
Modarres Najafabadi, S. A., Kövecses, J. and Angeles, J., 2007, ''Energy analysis of contacts in multibody systems: A novel interpretation of the energetic coefficient of restitution'', Proc. of 12th IFToMM World Congress on Mechanism and Machine Science, Paper # 840, in Besançon, France, June 18--21.
Figliolini, G., Rea, P. and Angeles, J., 2007, ''Synthesis of Geneva mechanisms and their equivalent pure-rolling cams``, Proc. of 12th IFToMM World Congress, in Besançon, France, June18--21.
Bourrelle, J. S., Chen, C., Caro, S. and Angeles, J., 2007, ``Graphical user interface to solve the Burmester problem'', Proc. of 12th IFToMM World Congress, in Besançon, France, June 18--21.
Cardou, P. and Angeles, J., 2007, ``Singularity analysis of accelerometer strapdowns for the estimation of the acceleration field of a planar rigid-body motion'', Proc. of 12th IFToMM World Congress, in Besançon, France, June 18--21.
Chen, C. and Angeles, J., 2007 ``Kinematic synthesis of an eight-bar linkage to visit eleven poses exactly'', Proc. of 12th IFToMM World Congress, in Besançon, France, June 18--21.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles, J.: 2007, “An energy approach to dynamics analysis of impacts in multibody systems”. 21st Canadian Congress of Applied Mechanics, pp. 583--584, Toronto, Ontario, June 3 - June 7.
Cardou, P. and Angeles, J., 2007, ``Simpletic architectures for true multi-axial accelerometers: a novel application of parallel robots'', Proc. 2007 IEEE International Conference on Robotics and Automation, Rome, Italy, April 10--14.
BALIGA, B.R.
Journal Publications
Lamoureux, A., Camargo, L., and Baliga, B.R., Power spectrums and Strouhal number distributions for turbulent fully-developed flows in rectangular ducts with spatially-periodic plate inserts, Advances in Compact Heat Exchangers – special supplemental issue of the International Journal of Heat Exchangers, pp. 169-185, January, 2007.
Acharya, S., Baliga, B.R., Karki, K., Murthy, J.Y., Prakash, C., and Vanka, S.P., Pressure-based finite volume methods in computational fluid dynamics, ASME J. Heat Transfer, Vol. 129, pp. 407-424,2007.
Atabaki, N. and Baliga, B.R., Effective thermal conductivity of water-saturated sintered powder-metal plates, Heat and Mass Transfer, Vol. 44, pp. 85-99, 2007.
Refereed Conference Proceedings
Costa, V.A.F., Oliveira, L.A., and Baliga, B.R., On first- and second-order mass-weighted schemes for control-volume finite element methods, Proc. International Conference on Computational Heat and Mass Transfer, pp. 378-384, Canmore, Alberta, Canada, June 18-22, 2007.
Atabaki, N., Jesuthasan, N., and Baliga, B.R., Steady-state network thermofluid models of loop heat pipes, Proc. ASME-JSME Thermal Engineering Summer Heat Transfer Conference (HT2007), Paper HT2007-32681, pp. 1-11, Vancouver, British Columbia, Canada, July 8-12, 2007.
Lamoureux, A. and Baliga, B.R., Temporally- and spatially-periodic laminar flow and heat transfer in staggered-plate arrays, Proc. ASME-JSME Thermal Engineering Summer Heat Transfer Conference (HT2007), Paper HT2007-32679, pp. 1-10, Vancouver, British Columbia, Canada, July 8-12, 2007.
Lamoureux, A. and Baliga, B.R., Temporally-periodic developing laminar flow and heat transfer in staggered-plate arrays, Proc. Sixth International Conference on Enhanced, Compact and Ultra- Compact Heat Exchangers (CHE2007), pp. 1-8, Potsdam, Germany, September 16-21, 2007.
BARTHELAT, F.
Journal Publications
F. Barthelat, “Biomimetics for Next Generation Materials”. Philosophical Transactions of the Royal Society A: Mathematical and Engineering Sciences 365, p 2907-2919 (2007).
F. Barthelat and H.D. Espinosa, “An Experimental Investigation of Deformation and Fracture of Nacre-Mother of Pearl”. Experimental Mechanics 47 (3), p 311-324 (2007).
H. Tang, F. Barthelat and H.D. Espinosa, “An Elasto-Viscoplastic Interface Model for Investigating the Constitutive Behavior of Nacre”. Journal of the Mechanics and Physics of Solids. 55 (7), p1410-1438 (2007).
F. Barthelat, H. Tang, P.D. Zavattieri, C.-M. Li and H.D. Espinosa, “On the mechanics of mother- of-pearl: A key feature in the material hierarchical structure”. Journal of the Mechanics and Physics of Solids 55 (2), p 306-337 (2007).
BERGTHORSON, J.
Journal Publications
J M Bergthorson & P E Dimotakis, 2007. Premixed laminar C1-C2 stagnation flames: experimentsand simulationswith detailed thermochemistry models Proceedings of the Combustion Institute, vol.31, pp.1139-1147.
Published Conference Proceedings
J M Bergthorson, M B Johnson, A M Bonanos, & P E Dimotakis, 2007. Measurements of molecular mixing in an expansion-ramp combustor. In: Proceedings of the21st International Colloquium on the Dynamics of Explosions and Reactive Systems, paper number 63, http://www.icders2007-poitiers.org/ICDERS_program/ORAL_EXT/ICDERS21_0063.pdf.
CORTELEZZI, L.
Journal Publications
N. Tilton and L. Cortelezzi, "Effects of Wall-Permeability on the Asymptotic Suction Boundary Layer (ASBL)", presented at the 61st Annual Meeting Division of Fluid dynamics of the American Physical Society and published in the Bulletin Amer. Phys. Soc., Vol. 52, No. 9, 2007.
FROST, D.L.
Journal Publications
Frost, D.L., Ornthanalai, C., Zarei, Z., Tanguay, V., and Zhang, F., “Particle Momentum Effects from Detonation of Heterogeneous Explosives,” J. Applied Physics, Vol. 101, Issue 11, 113529, 2007.
Refereed Conference Proceedings
Frost, D.L., Cairns, M., Goroshin, S., and Zhang, F., “Reaction of titanium and zirconium particles in cylindrical explosive charges,” Proc. of 15th American Physical Society Topical Conference on Shock Compression of Condensed Matter, Big Island, HI, June, 2007.
Leadbetter, J., Ripley, R.C., Zhang, F., and Frost, D.L., “Multiple energy scaling of blast waves from heterogeneous explosives,” Proceedings of 21st International Colloquium on the Dynamics of Explosions and Reactive Systems (ICDERS), Poitiers, France, July 23 – 27, 2007.
HABASHI, W.G.
Refereed Conference Proceedings
K. Nakakita, W. G. Habashi and S. Nadarajah, “Toward Real-time Aero-Icing Simulation Using Reduced Order Models,” Paper 071CE-125, SAE Aircraft and Engine Icing International Conference, Seville, Spain, September 2007.
M. S. Aubé, C. N. Aliaga, W. G. Habashi and G. S. Baruzze, “Applicaton of FENSAP-ICE – Unsteady to Helicopter Icing,” Paper 071CE-56, SAE Aircraft and Engine Icing International Conference, Seville, Spain, September 2007.
X. Viellard, C.N. Aliaga and W. G. Habashi, “FENSAP-ICE Modelling of the Ice Particle Threat to Engines in Flight,” Paper 071CE-132, SAE Aircraft and Engine Icing International Conference, Seville, Spain, September 2007.
C. N. Aliaga, W. G. Habashi, M. S. Aubé and G. S. Baruzzi, “A Third-generation In-Flight Icing Code: FENSAP-ICE-Unsteady,” Paper 071CE-33, SAE Aircraft and Engine Icing International Conference, Seville, Spain, September 2007.
H. Wang, P. Tran, W. G. Habashi, Y. Chen, M. Zhang, L. Feng, “Anti-Icing Simulation in Wet Air of a Piccolo System using FENSAP-ICE,” Paper 071CE-60, SAE Aircraft and Engine Icing International Conference, Seville, Spain, September 2007.
G. S. Baruzzi, P. Lagace, W. G. Habashi, M. S. Aubé, “FENSAP-ICE: A computational Approach to Shed-Ice Trajectory Simulation,” Paper 071CE-34, SAE Aircraft and Engine Icing International Conference, Seville, Spain, September 2007.
K. Nakakita, W. G. Habashi and S. Nadarajah, “ Toward Real-time Areo-icing Simulatin using Reduced Order Models, “ AIAA Paper 2007-4281, 37th AIAA Fluid Dynamics Conference, Miami, June 2007.
L. Remaki, W. G. Habashi, S. Nadarajah, “Functional Output Error-based Mesh Adaptation,” AIAA Paper 2007-1297, 45th AIAA Aerospace Sciences Meeting, Reno, January 2007.
HIGGINS, A.
Journal Publications
Goroshin, S., Mamen, J., Higgins, A., Bazyn, T., Glumac, N., and Krier, H., “Emission Spectroscopy of FlameFronts Aluminum Suspensions,” Proceedings of the Combustion Institute, Vol. 31, Issue 2, January 2007, pp. 2011-2019.
Petel, O.E., Mack, D., Higgins, A.J. Turcotte R., and Chan, S.K., “Minimum Propagation Diameter and Thickness of High Explosives,” Journal of Loss Prevention in the Process Industries, Vol. 20, No. 4, July, 2007, pp.578-583.
Refereed Conference Proceedings
Knowlen, C., Higgins, A.J., and Harris, P., “Experimental Investigation of Shock-Induced Combustion Propulsion,”21st International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers, France, July 23 – July 27, 2007.
Depraz, S., Knowlen, C., Bauer, P., Higgins, A.J., “New Tools for Ram Accelerator Performance Modeling,” 21st International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers, France, July 23 – July 27, 2007.
Tang, F.D., Higgins, A.J.,and Goroshin, S., “Flame Propagation Limit in Solid Fuel Suspension without Heat Loss,” 21st International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers, France, July 23 – July 27, 2007.
Loiseau, J., and Higgins, A.J., “Statistical Measurement of Critical Tube Diameter,” 21st International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers, France, July 23 – July 27, 2007.
Vincent, T., Samuel G., Higgins, A.J., and Zhang, F., “Combustion of Metal Particles in Gaseous Detonation Products,” 21st International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers, France, July 23 – July 27, 2007.
Vu, P., Leung, H.W., Tanguay, V., Tahir, R., Higgins, A., and Timofeev, E. “Numerical and theoretical analysis of the precursor shock wave formation at high-explosive channel detonation,” Proceedings of 26th International Symposium on Shock Waves, Goettingen, Germany, July 15-20, 2007.
Loiseau, J., Szirti, D., Batchelor, P., Higgins, A., Tanguay, V., Yoshinaka, A., Zhang, Z., “Phase Velocity Generator for Two-Stage Implosion Driven Hypervelocity Launcher,”Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
Szirti, D., Loiseau, J., Batchelor, P., Higgins, A.J., Tanguay, V., Zhang, F., “Development of a Single-Stage Implosion-Driven Hypervelocity Launcher,” Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
Jetté, F.X., and Higgins, A.J., “Critical Diameter Prediction for Steady Detonation in Gassless Metal-Sulfur Compositions,” Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
Jetté, F.X., Goroshin,S., and Higgins, A.J., “Shock Reactivity of Non-Porous Mixtures of Manganese and Sulfur,” Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
Jetté, F.X., Goroshin, S., and Higgins, A.J., “Time-Resolved Temperature Measurements of Shock Initiation in a Manganese-Sulfur,” Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
Mack, D., Petel, O., and Higgins, A.J., “Detonation Failure Thickness Measurement in an Annular Geometry,” Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
Petel, O.E., Higgins, A.J., Yoshinaka A.C., and Zhang, F., “High-Speed Photography of Detonation Propagation in Dynamically Precompressed Liquid Explosives,” Shock Compression of Condensed Matter–2007, American Institute of Physics, June 24–29, 2007, Kohala Coast, Hawaii.
HUBERT, P.
Journal Publications
M. Haider, P. Hubert, L. Lessard, “Cure Shrinkage Characterization and Modeling of a Polyester Resin Containing Low Profile Additives”, Composites Part A, 38 (2007) 994–1009.
M. Dubé, P. Hubert, A. Yousefpour and J. Denault, “Resistance Welding of Thermoplastic Composites Skin/Stringer Joints”, Composites Part A, 38 (2007) 2541–2552.
M. Haider, P. Hubert and L. Lessard, “An Experimental Investigation for Class A Surface Finish in Resin Transfer Molding Process”, Composites Science and Technology, 67 (2007) 3176-3186.
Refereed Conference Proceedings
M. Dubé, P. Hubert,J. Gallet, D. Stavrov, H. Bersee and A. Yousefpour, “Heating Element Optimization in Resistance Welding of Semi-Crystalline and Amorphous Thermoplastic Composites”, The 6th Canadian International Composites Conference, Winnipeg, MB, August 14- 17 2007.
L. Khoun, P. Hubert, “Processing Characterization of a RTM Carbon Epoxy System for Aeronautical Applications”, The 6th Canadian International Composites Conference, Winnipeg, MB, August 14-17 2007.
P. Hubert, B. Ashrafi, K. Adhikari, J. Meredith, S. Vengallatore, “Carbon Nanotube Composite Microactuators: Design and Characterization”, The 16th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 2007.
M. Dubé, P. Hubert, A. Yousefpour,J. Denault, “Fatigue Performance of Resistance Welded Thermoplastic Composite Skins/Stringer Joints”, 28th SAMPE Europe International Conference, Paris April 2-4, 2007.
G. Palardy, P. Hubert, “Effect of the Painting Process on the Surface Finish of RTM Composite Car Body Panels”, 28th SAMPE Europe International Conference, Paris April 2-4, 2007.
KÖVECSES, J.
Journal Publications
Modarres Najafabadi, S.A., Kövecses, J. and Angeles J., “Energy Analysis and Decoupling in Three-Dimensional Impacts of Multibody Systems”. ASME Journal of Applied Mechanics, Vol. 74, pp. 845-851, September 2007.
Kövecses, J. and Angeles, J., “The Stiffness Matrix in Elastically Articulated Rigid-Body Systems” Multibody System Dynamics, Vol. 18, No. 2, pp. 169-184, 2007.
Kövecses, J., Kovács, L.L. and Stépán, G., “Dynamics Modelling and Stability of Robotic Systems with Discrete-Time Force Control”. Archive of Applied Mechanics, Vol. 77, No. 5, pp. 293-299, May 2007.
Refereed Conference Proceedings
Modarres Najafabadi, S.A., Kövecses, J. and Angeles, J., “An Energy-Based Approach to the Dynamics of Impacts in Unilaterally-Constrained Multibody Systems”. 2007 ASME International Design Engineering Technical Conferences, 6th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Paper #:DETC2007-35736, Las Vegas, Nevada, Sep. 4-7, 2007.
Wong, P.F., Kövecses, J., Lange, C. and Gonthier, Y., “Dynamics Simulation of Space Robotic Systems: Algorithms, Validation and Benchmarking”. 2007 Eccomas Thematic Conference on Multibody Dynamics, pp. 168-169, Milan, Italy, June 25-28, 2007.
Meshreki, M., Kövecses, J., and Attia, H., “Model Formulation for the Dynamics of Thin-Walled Aerospace Structures in High-Speed Machining”. 2007 Eccomas Thematic Conference on Multibody Dynamics, pp. 306-307, Milan, Italy, June 25-28, 2007.
Modarres Najafabadi, S.A., Kövecses, J., and Angeles, J., “Dynamic Analysis of Multiple-Point Impacts in Multibody Systems”. 2007 Eccomas Thematic Conference on Multibody Dynamics, pp. 419-420, Milan, Italy, June 25-28, 2007.
Modarres Najafabadi, S.A., Kövecses, J., and Angeles, J., “Energy Analysis of Contacts in Multibody Systems: A Novel Interpretation of the Energetic Coefficient of Restitution”. 12th IFToMM World Congress on Mechanism and Machine Science, Paper #: 840, Besançon, France, June 17-21, 2007.
Kovács, L.L., Stépán, G., and Kövecses, J., “Stability and Optimization Aspects of Slightly Damped Oscillatory Systems with Digital Force Control”. 12th IFToMM World Congress on Mechanism and Machine Science, Paper #: 808, Besançon, France, June 17-21, 2007.
Modarres Najafabadi, S.A., Kövecses, J. and Angeles, J., “An Energy Approach to Dynamics Analysis of Impacts in Multibody Systems”. 21st Canadian Congress of Applied Mechanics, pp. 583-584, Toronto, Ontario, June 3 - June 7, 2007.
Kövecses, J., “Development and Teaching of a Course on Mechanisms for Mechanical Engineering Students at the Undergraduate Level”. 21st Canadian Congress of Applied Mechanics, p. 116, Toronto, Ontario, June 3 - June 7, 2007.
Lange, C., Kövecses, J., and Gonthier, Y., “Benchmarking of Multibody System Simulations: Points to Consider”. 2007 CcToMM Symposium on Mechanisms, Machines, and Mechatronics, Paper #: CCToMM07-N08, Saint-Hubert, Quebéc, May 31 - June 1, 2007.
Modarres Najafabadi, S.A., Kövecses, J., and Angeles, J.. “A Novel Approach to Dynamics Analysis of Multiple-Point Impacts Involving Multibody Systems”. 2007 CcToMM Symposium on Mechanisms, Machines, and Mechatronics, Paper #: CCToMM07-N09, Saint-Hubert, Quebéc, May 31 - June 1, 2007.
LEE, H.T.
Journal Publications
Lee, T., (2007) "Effectiveness of dynamic trailing-edge flap control of tip vortex," AIAA Journal, vol. 45, no. 2, pp. 2994-3002.
Gerontakos, P. and Lee, T., (2007) "Lift-induced drag of a cambered wing for Re < 1,000,000," Experiments in Fluids, vol. 42, no. 3, pp. 363-369.
Gerontakos, P. and Lee, T., (2007) "Trailing-edge flap control of dynamic pitching moment," AIAA Journal, vol. 45, no. 7, pp. 1688-1694.
Saad, M. and Lee, T., (2007) "Shear layers behind a circular cylinder with rotary oscillation," Experiments in Fluids, vol. 43, no. 4, pp. 569-578.
Lee, T. and Pereira, J., (2007) "Impact of short-span spoiler and tab on unsteady tip vortex," Experiments in Fluids, vol. 43, no. 4, pp. 617-626.
Gerontakos, P. and Lee, T., (2007) "Dynamic wing airloads with higher harmonic flap motion," Journal of Aircraft, vol. 44, no. 3, pp. 954-962.
Lee, T., (2007) "Effect of flap motion on unsteady aerodynamic loads," Journal of Aircraft, vol. 44, no. 1, pp. 333-337.
Daccache, E. and Lee, T., (2007) "Effect of a winglet on normal blade-vortex interaction," Journal of Aircraft, vol. 44, no. 1, pp. 264-273.
Lee, L., and Lee, T., (2007) "Effect of Gurney flap on unsteady wake vortex," Journal of Aircraft, vol. 44, no. 4, pp. 1398-1402.
Gerontakos, P. and Lee, T., (2007) "PIV investigation of flow over unsteady airfoil with trailing- edge strip," Experiments in Fluids, published online (DOI 10.1007/s00348-007-0414-z): December 12, pp. 1-18.
LEE, J.H.S.
Journal Publications
Radulescu, M.I., Sharpe, G.J., Law Chung, Kai., Lee, J.H.S. (2007) The Hydrodynamic Structure of Cellular Detonations, Journal of Fluid Mechanics, Vol. 580, pp. 31-81.
Ng, H.D., Ju, Y., Lee, J.H.S. (2007) Assessment of Detonation Hazards in High-Pressure Hydrogen Storage from Chemical Sensitivity Analysis, International Journal of Hydrogen Energy, No. 32, pp. 93-99.
Zhu, Y.J., Chao, J., Lee, J.H.S. (2007) An Experimental Investigation of the Propagation Mechanism of Critical Deflagration Waves that Lead to the Onset of Detonation, Proceedings of the Combustion Institute, No. 31, pp. 2455-2462.
Refereed Conference Proceedings
Ng, H.D., Chao, J., Yatsufusa, T., Haeck, J.F., Lee, J.H.S. (2007) “Detonation Properties in Dimethyl Ether-Oxygen Mixtures,” Proceedings of the 21st ICDERS, Poitiers, France, July 23rd to 27th, 2007.
Chao, J., Yatsufusa, T., Lee, J.H.S. (2007) Meta-Stable Deflagration Waves, Proceedings of the 21st ICDERS, Poitiers, France, July 23rd to 27th, 2007.
Yatsufusa, T., Chao, J., Lee, J.H.S. (2007) The Effect of Perturbations on the Onset of Detonation, Proceedings of the 21st ICDERS, Poitiers, France, July 23rd to 27th, 2007. "The Detonation Phenomenon" Cambridge University Press (June 2008).
LESSARD, L.
Journal Publications
Haider, M., Hubert, P. and Lessard, L., “An Experimental Investigation For Class A Surface Finish of Composites Made By The Resin Transfer Molding Process,” Composites Science and Technology, Vol. 67, 2007, pp. 3176-3186.
Shokrieh, M., Lessard, L. and Golubovic, A., “Adhesively Bonded Carbon/Titanium Joints Under In-Plane and Bending Loads,” Iranian Polymer Journal Vol. 16, No. 5, 2007, pp. 291-307.
Haider, M., Hubert, P. and Lessard L., "Cure Shrinkage Characterization and Modeling of a Polyester Resin Containing Low Profile Additives", Composites Part A, 2007, 38, 994-1009.
Refereed Conference Proceedings
Octeau, M.A., Hojjati, M., O‟Flynn, J., Theriault, F. and Lessard, L., “Design for Manufacturing Aeronautical Components Produced by RTM”, CANCOM 2007 International Conference on Composite Materials, Winnipeg, August 14-17, 2007.
Ghiasi, M.H., Pasini, D., and Lessard, L., “Improved Globalized Nelder-Mead Method for Optimization of a Composite Bracket”, ICCM 16th International Conference on Composite Materials, Kyoto, Japan, July 8 - 13, 2007.
O‟Flynn, J., Octeau, M.A, Theriault, F., and Lessard, L., “Coupled Design of a Helicopter Part and Mould for Resin Transfer Moulding”, ICCM 16th International Conference on Composite Materials, Kyoto, Japan, July 8 - 13, 2007.
MATEESCU, D.
Journal Publications
D. Mateescu, Y. Han and A.K. Misra. Dynamics of structures with piezoelectric sensors and actuators for structural health monitoring. Key Engineering Materials, Vol. 347, 2007, pp. 493-498.
Refereed Conference Proceedings
D. Mateescu, Y. Han and A.K. Misra. Analysis of smart structures with piezoelectric strips subjected to unsteady aerodynamic loads. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, April 2007, AIAA Paper 2007-2001, pp. 1-26.
D. Mateescu, Y. Han and A.K. Misra. Dynamics of structures with piezoelectric sensors and actuators for structural health monitoring. 7th International Conference on Damage Assessment of Structures, DAMAS 2007 (ASME), June 2007, pp. 1-6.
MISRA, A.K.
Journal Publications
Cohen, S.S. and Misra, A.K. (2007). Elastic oscillations of the space elevator ribbon. Journal of Guidance, Control and Dynamics, Volume 30, No. 6, pp. 1711-1717.
Gosselin, F., Paidoussis, M.P. and Misra, A.K. (2007). Stability of a deploying/extruding beam in dense fluid. Journal of Sound and Vibration, Vol. 299, pp. 123-142.
Karagiozis, K.N., Paidoussis, M.P. and Misra, A.K. (2007). Transmural pressure effects on the stability of clamped cylindrical shells subjected to internal fluid flow: Theory and experiments. International Journal of Non-Linear Mechanics, Vol. 42, pp. 13-23.
Mateescu, D., Han, Yong and Misra, A.K. (2007). Dynamics of structures with piezoelectric sensors and actuators for structural health monitoring. Key Engineering Materials, Vol. 347, pp. 493-498.
Proceedings of the 7th International Conference on Damage Assessment of Structures, DAMAS 2007, pp. 1-6.
Refereed Conference Proceedings
Cohen, S. and Misra, A.K. Effects of climber transit on the space elevator dynamics. 58th International Astronautical Congress, Hyderabad, India, September 2007, Paper No. IAC-07- D4.1.04.
Mateescu, D., Han, Y. and Misra, A.K. Analysis of smart structures with piezoelectric strips subjected to unsteady aerodynamic loads. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, April 2007, Paper No. AIAA 2007-2001.
Misra, A.K. and Cohen, S. Elastic oscillations of space tethers and the space elevator. 8th International Conference on Vibration Problems (ICOVP-2007), January-February 2007, BESU, Shibpur, India. Invited Lecture.
MONGEAU, L.
Journal Publications
Park, J.B., and Mongeau, L., “Instantaneous orifice discharge coefficient measurements of a physical driven model of the human larynx,” J. Acoust. Soc. Am., Vol. 121, No. 1, pp. 442-455, 2007.
Zanartu, M., Mongeau, L. and Wodicka, G. R., "Influence of acoustic loading on an effective single mass model of the human larynx", J. Acoust. Soc. Am., Vol. 121, No. 2, pp. 1119-1129, 2007.
Cook, D.D., and Mongeau, L., “Sensitivity of a continuum vocal fold model to geometric parameters, constraints, and boundary conditions,” J. Acoust. Soc. Am., Vol. 121, No. 4, pp. 2247-2253, 2007.
Paek, I., Braun, J.E., and Mongeau, L., “Evaluation of standing-wave thermoacoustic cycles for cooling applications,” Int. J. Refrigeration, Vol. 30, No. 6, pp. 1059-1071, 2007.
Thomson, S.L., Mongeau, L., and Frankel, S.H., “Flow over a membrane-covered, fluid-filled cavity,” Computers and Structures, Vol. 85, No. 11, pp. 1012-1019, 2007.
Singh, K.K., Mongeau, L., Frankel, S.H., and Gore, J.P., “Effect of Co- and Counterswirl on Noise from Swirling Flows and Flames,” AIAA Journal, Vol. 45, No. 3, pp. 651-661, 2007.
Mejia, P., Park, J.B., and Mongeau, L., “Surface pressure fluctuations in separated-reattached flows behind notched spoilers,” SAE 2007 Transactions, Journal of Passenger Cars: Mechanical Systems.
Kim, U., Mongeau, L., and Krousgrill, C., “Simulations of friction-induced vibrations of window sealing systems,” SAE 2007 Transactions, Journal of Passenger Cars: Mechanical Systems.
Refereed Conference Proceedings
Lew, P., Lyrintzis, A., Crouse, B., Balasubramanian, G., Freed, D., and Mongeau, L., “Noise Prediction of a Subsonic Turbulent Round Jet using the Lattice-Boltzmann Method,” AIAA/CEAS Paper AIAA-2007-3636, 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference), Rome, Italy, May 21-23, 2007.
Mejia, P., Park, J.B., and Mongeau, L., “Surface pressure fluctuations in separated-reattached flows behind notched spoilers,” Proceedings of the 2007 SAE Noise & Vibration Conference, Paper 2007-01-2399, St-Charles, Illinois, May 15-17, 2007.
Kim, U., Mongeau, L., and Krousgrill, C., “Simulations of friction-induced vibrations of window sealing systems,” Proceedings of the 2007 SAE Noise & Vibration Conference, Paper 2007-01- 2268, St-Charles, Illinois, May 15-17, 2007.
MONGRAIN, R.
Journal Publications
Nagano N., Cartier R., Zigras T., Mongrain R., Leask R., Mechanical properties and microscopic findings of a Dacron graft explanted 27 years after coarctation repair, The Journal of Thoracic and Cardiovascular Surgery, 134(4), 2007.
Mongrain R., Faik I., Leask R., Bulman-Fleming N., Bertrand O.F., Effects of diffusion coefficients and struts apposition using numerical simulations for drug eluting coronary stents, ASME Journal of Biomechanical Engineering, 129:733-742, 2007.
Fromageau J., Gernisson J.L., Schmitt C., Maurice R., Mongrain R., Cloutier G., Estimation of polyvinyl alcohol cryogel mechanical properties with four ultrasound elastography methods and comparison with gold standard testings, IEEE TUFFC Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 54(3): 498-511, 2007.
Faik I., Mongrain R., Bertrand O.F., Characterization of the Hemodynamic Parameters in a Stented Coronary Artery, Biomedical Materials, 2: S28-S37, 2007.
Galaz R., Mongrain R., Pazos V., Leask R., Tardif J.-C., Transient fluid-structure interaction computational analyses to assess patient specific atherosclerotic plaque vulnerability (abstract), Simulation in Healthcare (abstract), 2(2):158, 2007.
MYDLARSKI, L.
Refereed Conference Proceedings
Mydlarski, L., Danaila, L. and Lavertu, R.A., 2007. Isotropy of the temperature field downstream of a line source in turbulent channel flow. Advances in Turbulence XI: Proceedings of the Eleventh EUROMECH European Turbulence Conference (June 25-28, 2007), p. 500-502.
Khorsandi, B., Lavertu, T., Gaskin, S.J. and Mydlarski, L., 2007. A random jet array for laboratory studies of jet dilution within a turbulent environment.
Proceedings of the Eighteenth Canadian Hydrotechnical Conference (August 22-24, 2007), Canadian Society for Civil Engineering, Paper HYD-057, p. 1-10.
Lepore, J. and Mydlarski L., 2007. The directional dependence of scalar mixing downstream of a concentrated source in turbulent channel flow. Bulletin of the American Physical Society, Volume 52, No. 17, p. 144.
Khorsandi, B., Mydlarski, L. and Gaskin, S.J., 2007. Effect of background turbulence on the velocity field of a turbulent jet. Proceedings of the 5th International Symposium on Environmental Hydraulics: ISEH V (December 4-7, 2007), International Association of Hydraulic Engineering and Research, p. 1-6.
Mydlarski, L., Danaila, L. and Lavertu, R.A., 2007. Isotropy of the temperature field downstream of a line source in turbulent channel flow. Presented at The Eleventh European Turbulence Conference, Porto, Portugal, June 25-28, 2007.
Khorsandi, B., Lavertu, T., Gaskin, S.J. and Mydlarski, L., 2007. A random jet array for laboratory studies of jet dilution within a turbulent environment. Presented at The Eighteenth Canadian Hydrotechnical Conference and Symposium, Winnipeg, MB, August 22-24, 2007.
Lepore, J. and Mydlarski L., 2007. The directional dependence of scalar mixing downstream of a concentrated source in turbulent channel flow. Presented at The Sixtieth Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Salt Lake City, UT, 18-20 November, 2007.
Khorsandi, B., Mydlarski, L. and Gaskin, S.J., 2007. Effect of background turbulence on the velocity field of a turbulent jet. Presented at The Fifth International Symposium on Environmental Hydraulics (ISEH V), Tempe, AZ, December 4-7, 2007.
NADARAJAH, S.
Journal Publications
Nadarajah, S, “Convergence Studies of the Time Accurate and Non-Linear Frequency Domain Methods for Optimum Shape Design”, International Journal of Computational Fluid Dynamics, Vol. 21, No. 5-6 pp 189-207, June-July 2007.
Nadarajah, S and Jameson, A, “Optimum Shape Design for Unsteady Flows with a Time Accurate Continuous and Discrete Adjoint Method”, AIAA Journal, Vol.45, No.7, pp 1478-1491, 2007.
Nadarajah, S, and Jameson, A, “Optimum Shape Design for Unsteady Three-Dimensional Viscous Flows using a Non-Linear Frequency Domain Method”, AIAA Journal of Aircraft, Vol.44, No. 5, pp 1513-1527, 2007.
Refereed Conference Proceedings
Aliaga, C; Aube, M; Baruzzi, G; Habashi, W, and Nadarajah, S, “A Third-generation In-flight Icing Code: FENSAP-ICE-Unsteady”, 2007 SAE International Icing Conference, September 2007, Seville, Spain.
Nakakita, K; Nadarajah, S, and Habashi W., “Toward Real-Time Aero-Icing Simulation using Reduced Order Models on Complete Aircraft Configurations in Viscous Flow”, AIAA 37th Fluid Dynamics Conference and Exhibit, AIAA-2007-3837, June 2007, Miami FL.
Tatossian, C and Nadarajah, S, “Optimum Shape Design of Helicopter Rotors”, AIAA 37th Fluid Dynamics Conference and Exhibit, AIAA-2007-3837, June 2007, Miami FL.
Mousavi, A; Castonguay, P, and Nadarajah, S, “Survey of Shape Parameterization Techniques and its Effect on Three-Dimensional Aerodynamic Shape Optimization”, AIAA 37th Fluid Dynamics Conference.
Tatossian, C and Nadarajah, S, “Multi-objective Constrained Optimization using a Non-Linear Frequency Domain based Adjoint Approach”, 63rd Annual AHS Forum and Technology Display, May 2007, Virginia Beach VA
Soucy, O and Nadarajah, S, “Near Field Pressure Optimization for Sonic Boom Reduction”, 15th Annual Conference of the CFD Society of Canada, Toronto, Canada, May 27-31, 2007.
Mohamed, K; Nadarajah, S, and Paraschivoiu, M, “Unsteady Simulation of Turbulent Flows over Oscillating Wings”, CASI AERO 2007 Conference, Toronto, ON Canada, April, 2007.
Nakakita, K; Nadarajah, S, and W. Habashi, “Toward Real-Time Aero-Icing Simulation using Reduced Order Models on Complete Aircraft Configurations in Viscous Flow”, CASI AERO 2007 Conference, Toronto, ON Canada, April, 2007.
Mousavi, A; Castonguay, P, and Nadarajah, S, “Survey of Shape Parameterization Techniques and its Effect on Three-Dimensional Aerodynamic Shape Optimization”, CASI AERO 2007 Conference, Toronto, ON Canada, April, 2007.
Tatossian, C and Nadarajah, S, “Optimum Shape Design of Helicopter Rotors”, AIAA 2007-1274, 45th Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2007.
Castonguay, P and Nadarajah, S, “Effect of Shape Parameterization on Aerodynamic Shape Optimization”, AIAA 2007-0059, 45th Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2007.
Soucy, O, Nadarajah, S, Balloch, C, “Sonic Boom Reduction via Remote Inverse Adjoint Approach”, AIAA 2007-0056, 45th Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2007.
Remaki, L; Nadarajah, S, and Habashi, W, “Finite Element Solver with Bubble Elements and Mesh Adaptation for Accurate Drag and Lift Prediction”, 45th Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2007.
NAHON, M.
Journal Publications
C. Lambert, M. Nahon and D. Chalmers, 2007, "Implementation of an Aerial Positioning System with Cable Control‟, IEEE/ASME Transactions on Mechatronics, Vol. 12, No. 1, pp. 32-40.
C. Lambert, M. Nahon, D. Chalmers and G. Gilardi, 2007, „Cable Control of an Aerostat Platform - Experimental Results and Model Validation‟, AIAA Journal of Guidance, Control and Dynamics, Vol. 30, No. 2, pp. 620-628.
J. Miller and M. Nahon, "The Analysis and Design of Robust Helium Aerostats‟, AIAA Journal of Aircraft, Vol. 44, No. 5, pp. 1447-1458.
Y. Li and M. Nahon, "Simulation of Airship Dynamics‟, AIAA Journal of Guidance, Control and Dynamics, Vol. 30, No. 6, pp. 1691-1700.
Refereed Conference Proceedings
Y. Li, M. Nahon and I. Sharf, "Dynamics Modeling of Flexible Airships‟, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, April 23-26, 2007.
A. Howard and M. Nahon, „Experimental Testing and Simulation of an Aerostat with Actuated Tail Fins‟, AIAA Balloon Systems Conference, Williamsburg, Virginia, May 21-24, 2007.
N. Plamondon and M. Nahon, "A Flexible Oscillating Foil model for an Underwater AUV‟, CANCAM 2007, Toronto, June 3-7.
N. Plamondon and M. Nahon, "Modeling and Control of an Underwater Biomimetic Robot‟, UUST‟07, Durham, NH, Aug. 19-22.
G. Stante, M. Nahon and C. Williams, „Simulation of an Underwater Glider‟, UUST‟07, Durham, NH, Aug. 19-22.
O. Chiu, M. Nahon and N. Plamondon, "Stability Augmentation for a Hexapod Underwater Vehicle‟, UUST‟07, Durham, NH, Aug. 19-22.
P. Peddiraju, M. Nahon, and E. Earon, "Modeling and Simulation of a High-Performance Unmanned Airship‟, UVS Canada Conference, St. John‟s, November 2007.
H. Taghirad and M. Nahon, Forward Kinematics of A Macro–Micro Parallel Manipulator, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Zurich, Switzerland, Sept 2007.
H. Taghirad and M. Nahon, Jacobian Analysis of a Macro–Micro Parallel Manipulator, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Zurich, Switzerland, Sept 2007.
H. Taghirad and M. Nahon, Dynamic Analysis of A Redundantly Actuated Parallel Manipulator: A Virtual Work Approach, Proceedings of 15th Int. Iranian Conference on Electrical Engineering, May 2007, Tehran.
PAÏDOUSSIS, M.P.P.
Journal Publications
F. Gosselin, M.P. Païdoussis & A.K. Misra, 2007. Stability of a Deploying/Extruding Beam in Dense Fluid. J. Sound Vib. 299, 123-142.
E. de Langre, M.P. Païdoussis, O. Doaré & Y. Modarres-Sadeghi, 2007. "Flutter of Long Flexible Cylinders in Axial Flow.", J. Fluid Mech. 571, 371-389.
S.J. Price, M.P. Païdoussis & S. Krishnamoorthy, 2007. "Cross-flow past a pair of nearly in-line cylinders with the upstream cylinder subjected to a transverse harmonic oscillation". J. Fluids Struct. 23, 39-57.
A. Mekanik & M.P. Païdoussis, 2007. Stability analysis of uniform and non-uniform annular passages conducting incompressible laminar flows for small and large amplitude oscillatory motions of the outer cylinder. J. Sound Vib. 303, 78-108.
K.N. Karagiozis, M.P. Païdoussis & M. Amabili, 2007. Effect of geometry on the stability of cylindrical clamped shells subjected to internal fluid flow. Comput. Struct. 85, 645-659.
K.N. Karagiozis, M.P. Païdoussis & A.K. Misra, 2007. Transmural pressure effects on the stability of clamped cylindrical shells subjected to internal fluid flow: Theory and experiments. Int'l J. Non- Linear Mech. 42, 13-23.
L. Tang & M.P. Païdoussis, 2007. A fluidelastic model for the dynamics of cantilevered plates with an additional spring support in axial flow. Comput. Struct. 85, 1089-1096.
Y. Modarres-Sadeghi, M.P. Païdoussis & C. Semler, 2007. The nonlinear behaviour of a slender flexible cylinder pinned or clamped at both ends and subjected to axial flow. Comput. Struct. 85, 1121-1133.
M. Wadham-Gagnon, M.P. Païdoussis & C. Semler, 2007. Dynamics of cantilevered pipes conveying fluid. Part 1: Nonlinear equations of three-dimensional motion. J. Fluids Struct. 23, 545-567.
M.P. Païdoussis, C. Semler, M. Wadham-Gagnon & S. Saaid, 2007. Dynamics of cantilevered pipes conveying fluid. Part 2: Dynamics of the system with intermediate spring support. J. Fluids Struct. 23, 569-587.
Y. Modarres-Sadeghi, C. Semler, M. Wadham-Gagnon & M.P. Païdoussis, 2007. Dynamics of cantilevered pipes conveying fluid. Part 3: Three-dimensional dynamics in the presence of an end- mass. J. Fluids Struct. 23, 589-603.
L. Tang & M.P. Païdoussis, 2007. On the instability and the post-critical behaviour of two- dimensional cantilevered flexible plates in axial flow. J. Sound Vib. 305, 97-115.
A. Mekanik & M.P. Païdoussis, 2007. Unsteady pressure in the annular flow between two concentric cylinders, one of which is oscillating: experiment and theory. J. Fluids Struct. 23, 1029-1046.
Refereed Conference Proceedings
M.P. Païdoussis, 2007. From fluid-conveying pipes to offshore, power generation and nuclear engineering applications. Invited Paper, 15th Annual Int'l Conference on Mechanical Engineering (ISME 2007), Tehran, Iran, May 2007, Invited Papers volume (eds M. Sadeghi & M. Salehi), pp. 1-28. Amirkabir University of Technology Publications.
F. Gosselin & M.P. Païdoussis, 2007. Stability of a rotating cylindrical shell containing axial flow. 18ème Congrès Français de Mécanique (CFM'07), Grenoble, France, CFM 2007, pp. 1578.
PASINI, D.
Journal Publications
Pasini D., Shape Transformers for Material and Shape Selection of Lightweight Beams, Journal of Mat...
Refereed Conference Proceedings
Khan, W.A., Caro, S., Angeles, J. and Pasini, D., “A formulation of complexity-based rules for the preliminary design stage of robotic architectures,” 10th International Conference on Engineering Design, ICED 07, Paris, August 2007.
Ghiasi, H., Pasini, D., Lessard, L., “Improved Globalized Nelder-Mead method for Optimization of a composite bracket”, ICCM16, 16th International Conference on Composite Materials, Kyoto, Japan, July, 2007.
Amany, A. and Pasini D., “Characterization of Shear and Bending Stiffness for Rectangular Beams Concepts”, CANCAM 2007 conference, Toronto, July 2007.
Mirjalili V. and Pasini D., Shape efficiency maps for Optimum Shape selection in torsion stiffness design, the 18th IASTED International Conference on Modelling and Simulation, May 30 – June 1, Montreal, 2007.
Amany, A. and Pasini D., “Shape and Material Selection for optimum structural efficiency in bending and shear stiffness”, WCSMO-7, 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, Korea, May 21-25, 2007.
PRICE, S.
Journal Publications
Poirel, D., Price, S.J., Bifurcation characteristics of a two-dimensionally structurally non-linear airfoil in turbulent flow. Nonlinear Dynamics 48, 423 435.
Price, S.J., Paidoussis, M.P., Krishnamoorthy, S., 2007 Cross-flow past a pair of nearly in-line cylinders with the upstream cylinder subjected to a transverse harmonic oscillation. Journal of Fluids and Structures 23, 39-57.
Marsden, C.C., Price S.J., 2007. Transient and limit cycle simulation of a nonlinear aeroelastic system. AIAA Journal of Aircraft 44, 60-70.
RADZISZEWSKI, P.
Refereed Conference Proceedings
Ouellette, S., Dahan, C., Lee, E., Mathews, A., Proulx, O., Richardson, A., Turner, J., Radziszewski, P. (2007), Design Challenges and Possible Benefits of Electric/Hybrid Utility Snowmobiles, Plug-In Hybrid Electric Vehicle Conference – PHEV07, Winnipeg, Can, Nov. 1-2.
Dahan, C., Lee, E., Mathews, A., Ouellette, S., Proulx, O., Richardson, A., Turner, J., Radziszewski, P. (2007), the Conversion of a Personal Watercraft to Electric/Hybrid Drive Through the Use of MATLABSimulink, Plug-In Hybrid Electric Vehicle Conference – PHEV07, Winnipeg, Canada, November 1-2.
Ouellette, S., Turner, J., Mathews, A., Dahan, C., Lee, E., Proulx, O., Richardson, A., Joos, G., Radziszewski, P. (2007), Development of a Series PHEV Formula Style Race Car, Plug-In Hybrid Electric Vehicle Conference – PHEV07, Winnipeg, Canada, November 1-2.
Martins, S., Li, W., Radziszewski, P., Caron, S. (2007), Investigating the Differences in Charge Dynamics due to a Variation of the Instrumented Ball Properties, 12th IFAC Symposium on Automation in Mining, Mineral and Metal Processing, Quebec, Canada, August 21-23.
Radziszewski, P., Martins, S., Picard, B., Caron, S. (2007),Towards AG/SAG/Ball Mill On-Line Performance Prediction?, 6th Int‟l Copper Conference, Toronto, Canada, Aug. 25-30.
Martins, S., Radziszewski, P., Picard, B., Brochu, M., Seminari, U. (2007), Exploring the Feasibility of using a Commercial Hardware and Software Physics Engine for Milling System Simulation, Discrete Element Methods - DEM‟07, Brisbane, Australia, Aug. 27-29.
Martins, S., Li, W., Radziszewski, P., Caron, S., Aguanno, M., Bakhos, M., Petch, E.L. (2007), Validating the Instrumented Ball Outputs with Simple Trajectories, Discrete Element Methods (DEM) ‟07, Brisbane, Australia, August 27-29.
Wang, G., Radziszewski, P., Caron, S. (2007), Particle modeling of material comminution, Discrete Element Methods (DEM) ‟07, Brisbane, Australia, August 27-29.
Wang, G., Radziszewski, P., Ouellet, J. (2007), Exploring DEM model development for the simulation of thermal effects on ore breakage, Discrete Element Methods (DEM) ‟07, Brisbane, Australia, August 27-29.
St-Pierre, L., Hassani, F.P., Radziszewski, P., Ouellet, J. (2007), An investigation on dynamic testing, properties and responses of support systems. Proceedings of the 11th Congress of the International Society of Rock Mechanics, Lisbon (Portugal), July 2007, Vol. 1, pp 175-178.
St-Pierre, L., Hassani, F.P., Radziszewski, P., Ouellet, J., Plouffe, (2007), M. Testing and analyzing the dynamic response of rock support elements. Proceedings of the 4th International Symposium on High Performance Mine Production, Aachen (Germany), May 2007, pp 353-368.
SHARF, I.
Journal Publications
Smith, J.A.and I. Sharf, "Velocity Adjustment in a Bounding Quadruped", Journal of Biomechanics, 40(S2):S305, 2007.
Zhang, Y. and I. Sharf, "Rigid Body Impact Modeling Using Integral Formulation," ASME Journal of Computational and Nonlinear Dynamics, Vol. 2, No. 1, pp. 98-102, 2007.
Refereed Conference Proceedings
Zhang, Y. and I. Sharf, "Experimental Validation of Nonlinear Compliant Contact Force Models," Proc. ASME International Design Engineering Technical Conferences, DETC2007-34978, pp. 1-11, Las Vegas, NV, September 4-7, 2007.
Mu, X. and I. Sharf, ''Nonlinear Contact Parameter Estimation for Robotic Systems with Payload,'' Proc. ASME International Design Engineering Technical Conferences, DETC2007-35391, pp. 1-10, Las Vegas, NV, September 4-7, 2007.
Li, Y., M. Nahon and I. Sharf, "Dynamics Modeling of Flexible Airships", Proc. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA-2007-2212, pp. 1-27, Honolulu, Hawaii, April 23-26, 2007.
Cowan, D. and I. Sharf, "Dynamics Modeling and Simulation of Mars Rovers" , Proc. 58th International Astronautical Congress, IAC-07-A5.2.08, pp. 1-13, Hyderabad, India, September 24 - 28, 2007.
Robert, J. and I. Sharf, "Autonomous Capture of Free-floating Objects Using Predictive Approach,'' Proc. 58th International Astronautical Congress, IAC-07-C1.2.07, pp. 1-15, Hyderabad, India, September 24 - 28, 2007.
TIMOFEEV, E.V.
Journal Publications
Rahman, S., Timofeev E., and Kleine, H., 2007, “On pressure measurements in blast wave flow fields generated by milligram charges,” Review of Scientific Instruments, vol. 78, 125106.
Refereed Conference Proceedings
Tahir, R., Smith, H., Timofeev, E., Higgins, A., Lesage, F., Pimentel, R., and Molder, S., 2007 “Analytical, numerical and experimental modeling of flow starting in a two-shock inlet,” Proceedings of 16th CASI Propulsion Conference, Toronto, Ontario, Canada, April 25 and 26, 2007, 11p.
Najafiyazdi, A., Tahir, R., and Timofeev, E., 2007, “Numerical and analytical study of mass spillage through individual slots,” In: Groth, C.P.T., Lightstone, M.F., Yokota, J.W. (eds.) Proceedings of 15th Annual Conference of the CFD Society of Canada, Toronto, Ontario, 27-31 May, 2007, 8p.
Veillard, X., Tahir, R., Timofeev, E., and Molder, S., 2007, “Limiting contractions for starting a ramp intake with overboard spillage,” In: Janabi-Sharifi, F., Papini, M., Naylor, D. (eds.) Proceedings of the 21st Canadian Congress of Applied Mechanics, Ryerson University, Toronto, Ontario, Canada, June 3-7, 2007, 2p.
Najafiyazdi, A., Tahir, R., Timofeev, E., and Molder, S., 2007, "Numerical and theoretical analysis of flow starting in supersonic inlets by mass spillage,” AIAA Paper, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, Ohio, 8-11 July, 2007, 15p.
Rahman, S., Timofeev, E., Kleine, H., and Takayama, K., 2007, “On pressure measurements in blast wave flow fields generated by milligram charges,” In: Hannemann, K., Seiler, F. (eds) Proceedings of 26th International Symposium on Shock Waves, Goettingen, Germany, 15-20 July, 2007, 6p.
Kleine, H., Tetreault-Friend, M., Timofeev, E., Gojani, A., and Takayama, K., 2007 “On the ongoing quest to pinpoint the location of RR-MR transition in blast wave reflections,” In: Hannemann, K., Seiler, F. (eds) Proceedings of 26th International Symposium on Shock Waves, Goettingen, Germany, 15-20 July, 2007, 6p.
Timofeev, E., Noble, G., Goroshin, S., Lee, J., and Murray, S., 2007 “Numerical, theoretical and experimental study of shock wave reflection from a layer of spherical particles,” In: Hannemann, K., Seiler, F. (eds) Proceedings of 26th International Symposium on Shock Waves, Goettingen, Germany, 15-20 July, 2007, 6p.
Vu, P., Leung, H.W., Tanguay, V., Tahir, R., Higgins, A., and Timofeev, E., 2007 “Numerical and theoretical analysis of the precursor shock wave formation at high-explosive channel detonation,” In: Hannemann, K., Seiler, F. (eds) Proceedings of 26th International Symposium on Shock Waves, Goettingen, Germany, 15-20 July, 2007, 6p.
Timofeev, E., 2007 “Unsteady Navier-Stokes simulations of regular-to-Mach reflection transition on an ideal surface,” In: Hannemann, K., Seiler, F. (eds) Proceedings of 26th International Symposium on Shock Waves, Goettingen, Germany, 15-20 July, 2007, 6p.
VENGALLATORE, S.
Journal Publications
S. Prabhakar and S. Vengallatore (2007), “Thermoelastic Damping in Bilayered Micromechanical Beam Resonators,” Journal of Micromechanics and Microengineering, vol. 17 pp. 532-538.
Refereed Conference Publications
G. Sosale, S. A. Hacking, M. Suss, and S. Vengallatore, “Multiscale Topography Analysis of Microtextured Titanium: Importance of Lateral Spatial Resolution,” Transactions of the 32nd Annual Meeting of the Society for Biomaterials, Chicago, USA. April 18-21, 2007. p.799.
J. Crocker, G. Sosale, and S. Vengallatore, “Nanomechanical Characterization of Hexoloy-SG Silicon Carbide Thin Films,” Proceedings of the 21st Canadian Congress of Applied Mechanics (CANCAM), June 3-7, 2007, Toronto, Canada.
S. Prabhakar and S. Vengallatore, “Thermoelastic Coupling in Flexural Microresonators: Damping and Frequency Shifts,” Proceedings of the 21st Canadian Congress of Applied Mechanics (CANCAM), June 3-7, 2007, Toronto, Canada.
P. Hubert, B. Ashrafi, K. Adhikari, J. Meredith, and S. Vengallatore, “Carbon Nanotube Composite Actuators: Design and Characterization,” Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan
G. Sosale, S. A. Hacking, E. J. Harvey, J. E. Henderson, and S. Vengallatore (2007), "A comparison of White Light Interferometry and Atomic Force Microscopy for the analysis of implant microtexture" Bone, vol. 40, p. S275 (Abstracts of the 17th Scientific Meeting of the International Bone and Mineral Society, June 24-30, 2007, Montreal, Canada).
S. A. Hacking, L. Z. Lim, G. N. Kaufman, G. Sosale, S. Vengallatore, E. J. Harvey, and J. E. Henderson (2007), “Osseous response to micro-textured surfaces in the rat in vivo and in vitro,” Bone, vol. 40, p. S269. (Abstracts of the 17th Scientific Meeting of the International Bone and Mineral Society, June 24-30, 2007, Montreal, Canada).
L. Z. Lim, S. A. Hacking, G. N. Kaufman, G. Sosale, S. Vengallatore, E. J. Harvey, and J. E. Henderson (2007), “Micro-textured femoral implants promote bone regeneration in a mouse model,” Bone, vol. 40, p. S267. (Abstracts of the 17th Scientific Meeting of the International Bone and Mineral Society, June 24-30, 2007, Montreal, Canada).
M. Kuhn, T. Napporn, M. Meunier, S. Vengallatore, and D. Therriault, “Fabrication and Characterization of Single-Chamber Solid-Oxide Fuel Cells with Interdigitated Electrodes,” Proceedings of Hydrogen and Fuel Cells 2007: International Conference and Trade Show, April 29 – May 2, 2007, Vancouver, BC, Canada. (7 pages).
M. Kuhn, T. Napporn, M. Meunier, S. Vengallatore, and D. Therriault, “Direct-Write Microfabrication and Testing of Solid-Oxide Micro Fuel Cells,” Proceedings of the 13th Canadian Semiconductor Technology Conference, August 14 -17, 2007, Montreal, QC, Canada (2 Pages).
G. Sosale, S. A. Hacking, M. Suss, and S. Vengallatore, “Multiscale Topography Analysis of Microtextured Titanium: Importance of Lateral Spatial Resolution,” Transactions of the 32nd Annual Meeting of the Society for Biomaterials, Chicago, USA. April 18-21, 2007. p.799.
J. Crocker, G. Sosale, and S. Vengallatore, “Nanomechanical Characterization of Hexoloy-SG Silicon Carbide Thin Films,” Proceedings of the 21st Canadian Congress of Applied Mechanics (CANCAM), June 3-7, 2007, Toronto, Canada.
S. Prabhakar and S. Vengallatore, “Thermoelastic Coupling in Flexural Microresonators: Damping and Frequency Shifts,” Proceedings of the 21st Canadian Congress of Applied Mechanics (CANCAM), June 3-7, 2007, Toronto, Canada.
P. Hubert, B. Ashrafi, K. Adhikari, J. Meredith, and S. Vengallatore, “Carbon Nanotube Composite Actuators: Design and Characterization,” Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan.
G. Sosale, S. A. Hacking, E. J. Harvey, J. E. Henderson, and S. Vengallatore (2007), “A comparison of White Light Interferometry and Atomic Force Microscopy for the analysis of implant microtexture" Bone, vol. 40, p. S275 (Abstracts of the 17th Scientific Meeting of the International Bone and Mineral Society, June 24-30, 2007, Montreal, Canada).
S. A. Hacking, L. Z. Lim, G. N. Kaufman, G. Sosale, S. Vengallatore, E. J. Harvey, and J. E. Henderson (2007), “Osseous response to micro-textured surfaces in the rat in vivo and in vitro,” Bone, vol. 40, p. S269. (Abstracts of the 17th Scientific Meeting of the International Bone and Mineral Society, June 24-30, 2007, Montreal, Canada).
L. Z. Lim, S. A. Hacking, G. N. Kaufman, G. Sosale, S. Vengallatore, E. J. Harvey, and J. E. Henderson (2007), “Micro-textured femoral implants promote bone regeneration in a mouse model,” Bone, vol. 40, p. S267. (Abstracts of the 17th Scientific Meeting of the International Bone and Mineral Society, June 24-30, 2007, Montreal, Canada).
M. Kuhn, T. Napporn, M. Meunier, S. Vengallatore, and D. Therriault, “Fabrication and Characterization of Single-Chamber Solid-Oxide Fuel Cells with Interdigitated Electrodes,” Proceedings of Hydrogen and Fuel Cells 2007: International Conference and Trade Show, April 29 – May 2, 2007, Vancouver, BC, Canada. (7 pages).
M. Kuhn, T. Napporn, M. Meunier, S. Vengallatore, and D. Therriault, “Direct-Write Microfabrication and Testing of Solid-Oxide Micro Fuel Cells,” Proceedings of the 13th Canadian Semiconductor Technology Conference, August 14 -17, 2007, Montreal, QC, Canada (2 Pages).
ZSOMBOR-MURRAY, P.
Journal Publications
St-Pierre, L. & Zsombor-Murray, P.J., (2007) “Singularities in Redundant 4R Positioning Manipulators, CSME Trans., v.31, n.4, pp.373-391.
Zsombor-Murray, P.J., (2007) “Platonic Symmetry & Geometric Thinking”, Engineering Design Graphics Journal, v.71, n.3, pp.20-24.
Harker, M., O‟Leary, P. & Zsombor-Murray, P.J., (2007) “Direct Image-Specific Conic Fitting and Eigenvalue Bias Correction”, Image & Vision Computing, www.elsvier.com/locate/imavis, 10pp.
Zsombor-Murray, P.J. & El Fashny, S., (2007) “A Cylinder of Revolution on Five Points”, Journal for Geometry & Graphics, v.10, n.2, pp.125-131.
Yu, A., Bonev, I.A. & Zsombor-Murray, P.J., (2007) “Geometric Approach to the Accuracy Analysis of a Class of 3-DOF Planar Parallel Robots”, Mechanism and Machine Theory, v.43, n.3, 12pp.
Refereed Conference Proceedings
Zsombor-Murray, P.J. & Chen, C., (2007) “Two Degree of Freedom Parallel Manipulators and the Burmester Problem”, Proc. 12th IFTOMM World Congress, Besançon, 07-06, 5pp.
St-Pierre, L. & Zsombor-Murray, P.J., (2007) “Singularities of a Redundant 4R Positioning Manipulator”, Proc. CCToMM 2007 Symp., St-Hubert, 07-05, 10pp.