Angeles | Baliga | Cortelezzi | Frost | Habashi | Higgins | Hubert | Kovecses | Lee J.H.S. | Lee T. | Lessard | Mateescu | Misra | Mongeau | Mongrain | Mydlarski | Nadarajah | Nahon | Nemes | Paidoussis | Pasini | Price | Radziszewski | Sharf | Thomson | Timofeev | Vengallatore | Zsombor-Murray |

## ANGELES, J.

### Journal Publications

Khan, W.A., Krovi, V., Saha, S.K., and **Angeles, J.** , 2005, “Recursive kinematics and inverse dynamics for a planar 3R parallel manipulator”, ASME J. Dynamic Systems, Measurement, and Control, vol. 127, Vol. 4, pp. 529-536.

Khan, W.A., Krovi, V., Saha, S.K., and **Angeles, J.** , 2005, “Modular and recursive kinematics and dynamics for parallel manipulator", Multibody System Dynamics, vol. 14, pp. 419-455.

Figliolini, G. and **Angeles, J.** , 2005, “Algorithms for involute and octoidal bevel-gear generation”, ASME Journal of Mechanical Design, Vol. 127, pp. 664-672.

Figliolini, G. and **Angeles, J.** , 2005, “Synthesis of the base curves for n-lobed elliptical gears”, ASME Journal of Mechanical Design, Vol. 127, No. 5, pp. 997-1005.

Parsa, K., **Angeles, J.** and Misra, A.K., 2005, “Estimation of the flexural states of a macro-micro manipulator using point-acceleration data”, IEEE Transactions on Robotics, Vol. 21, No. 4, pp. 565-573.

Teng, C.P. and **Angeles, J.** , 2005, “An optimality criterion for the structural optimization of machine elements”, ASME Journal of Mechanical Design, Vol. 127, pp. 415-423.

Al-Widyan, K. and **Angeles, J.** , 2005, “A model-based formulation of robust design”, ASME Journal of Mechanical, Vol. 127, pp. 388-396.**Angeles, J.** , 2005, “An innovative drive for wheeled mobile robots”, IEEE/ASME Transactions on Mechatronics, Vol. 10, No. 1, pp. 43-49.

### Refereed Conference Proceedings

**Angeles, J.** and Michalska, H., 2005, “Modeling of an anti-tilting outdoor mobile robot”, Proc. of ASME International Design Engineering”,Technical Conferences & Computers and Information in Engineering Conference, DETC2005-85098, Long Beach, California, USA, Sept. 24-28.**Angeles, J.** and Bai Shaoping, 2005, “Some special cases of the Burmester problem for four and poses”, Proc. of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2005-84271, Long Beach, California, USA, Sept. 24-28.

Chen, C., **Angeles, J.** , 2005, “A generalized transmission index for spatial linkages”, Proc. of ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2005-84291, Long Beach, California, USA, Sept. 2-28.

Khan, W., and **Angeles, J.** , 2005, “A formulation of the preliminary design phase using complexity-based rules”, Proc. 2nd CDEN International Conference on Design Education, Innovation, and Practice, Kananaskis, Alberta, July 18-20.

Bouleti, J., Caro, S. and **Angeles, J.** , 2005, “Globally Robust Engineering Design Using Complexity Rules”, Proc. 2nd CDEN International Conference on Design Education, Innovation, and Practice, Kananaskis, Alberta, July 18-20.**Angeles, J.** , 2005, “The morphology design for a parallel Shönflies-motion generator”, Proc. 2nd International Colloquium on Robotic Systems for Handling and Assembly, Braunschweig, Germany, May 10-11, pp. 37-56.**Angeles, J.** , 2005, “Is there a characteristic length of a rigid-body displacement?”, Proc. of CK2005, International Workshop on Computational Kinematics, Cassino, Italy, May 4-6.

Chablat, D. and **Angeles, J.** , 2005, “Strategies for the design of a slide-o-cam transmission”, Proc. Of CK2005, International Workshop on Computational Kinematics, Cassino, Italy, May 4-6.

Bai, S.P. and **Angeles, J.** , 2005, “The design of a gearless pitch-roll wrist”, Proc. of IEEE International Conference on Robotics & Automation, Barcelona, Spain, April 18-22, ISBN 0-7803-8915-8, pp. 3224-3229.

Low, K.H., Loh, W.K., Wang, H., and **Angeles, J.** , 2005, “Motion study of an omni-directional rover for step climbing”, Proc. of IEEE International Conference on Robotics & Automation, Barcelona, Spain, April 18-22, ISBN 0-7803-8915-8, pp. 1597-1602.**Angeles, J.** , 2005, “The degree of freedom of parallel robots: a group-theoretic approach” , Proc. of IEEE International Conference on Robotics & Automation, Barcelona, Spain, April 18-22, ISBN 0-7803-8915-8, pp. 1017-1024.

(see also Kovecses, J., and Misra, A.K.)

## BALIGA, B.R.

### Refereed Conference Proceedings

Lamoureux, A., Camargo, L., and **Baliga, B.R.**, “Strouhal Numbers and Power Spectrums for Turbulent Fully-Developed Flows in Rectangular Ducts with Spatially-Periodic Interrupted-Plate Inserts”, Proc. Fifth International Conference on Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology, pp. 1-8, Whistler, British Columbia, Canada, September 11-16, 2005.

Atabaki, N. and **Baliga, B.R.**, “Measurement of Bulk Temperature in Thermally Developed Laminar Flows in Pipes”, Proc. 20th Canadian Congress of Applied Mechanics (CANCAM 2005), Mini-Symposium on Fluid Flow and Heat Transfer: Fundamentals and Applications, pp. 1-2, Montreal, Quebec, Canada, May 30-June 2, 2005.

Jesuthasan, N., **Baliga, B.R.**, and Savage, S.B., “Particle Sizing using Elements of a Particle Tracking Velocimetry System for Granular Flows”, Proc. 20th Canadian Congress of Applied Mechanics (CANCAM 2005), Mini-Symposium on Fluid Flow and Heat Transfer: Fundamentals and Applications, pp. 1-2, Montreal, Quebec, Canada, May 30-June 2, 2005.

Atabaki, N. and **Baliga, B.R.**, “Determination of Maximum Effective Pore Size of Sintered Porous Metal Plates” , Proc. 20th Canadian Congress of Applied Mechanics (CANCAM 2005), Mini-Symposium on Fluid Flow and Heat Transfer: Fundamentals and Applications, pp. 1-2, Montreal, Quebec, Canada, May 30-June 2, 2005.

## CORTELEZZI, L.

### Journal Publications

Campolo, M., Degano,G.M., Soldati, A. and **Cortelezzi, L.**, "Influence of jet inlet conditions on time-average behavior of transverse jets", AIAA Journal Vol. 43, no. 7, pp. 1549-1555, 2005.

### Refereed Conference Proceedings

**Cortelezzi, L.** and Mezic, I., "Stirring Generated by a Pair of Elliptic Vortex Patches", 2005 APS Division of Fluid Dynamics 58th Annual Meeting, Chicago, Nov.20-22; published in: Bulletin of the Amer. Phys. Soc., Vol. 50, No. 9, 2005.

Vainchtein, D., Mezic, I. and **Cortelezzi, L.**"Adiabatic Control of a Pair of Elliptical Vortex Patches", 2005 APS Division of Fluid Dynamics 58th Annual Meeting, Chicago, Nov.20-22; published in: Bulletin of the Amer. Phys. Soc., Vol. 50, No. 9, 2005.

Tilton, N. and **Cortelezzi, L.**, "Linear Stability Analysis of a Channel Flow with Porous Wall", 2005 APS Division of Fluid Dynamics 58th Annual Meeting, Chicago, Nov.20-22; published in: Bulletin of the Amer. Phys. Soc., Vol. 50, No. 9, 2005.

Adrover, A., Cerbelli, S., Giona, M. and **Cortelezzi, L.** "Influence of Diffusion on Optimal Mixing Protocols", 2005 APS Division of Fluid Dynamics 58th Annual Meeting, Chicago, Nov.20-22; published in: Bulletin of the Amer. Phys. Soc., Vol. 50, No. 9, 2005**Cortelezzi, L.**, "An Introduction to Analysis, Control and Applications of Mixing", Advanced School on Analysis and Control of Mixing with an Application to Micro and Macro Flow Processes, International Center for Mechanical Sciences, Udine, Italy, June 27 - July 1, 2005.**Cortelezzi, L.**, "Vortex Pairing: A Fundamental Stirring Mechanism in Two-Dimensional Turbulent Flows", Advanced School on Analysis and Control of Mixing with an Application to Micro and Macro Flow Processes, International Center for Mechanical Sciences, Udine, Italy, June 27 - July 1, 2005.**Cortelezzi, L.**, "A New Technique for Characterizing the Geometry of Mixing Flows", Advanced School on Analysis and Control of Mixing with an Application to Micro and Macro Flow Processes, International Center for Mechanical Sciences, Udine, Italy, June 27 - July 1, 2005.

## FROST, D.L.

### Refereed Conference Proceedings

**Frost, D.L.**, Goroshin, S., Levine, J., Ripley, R., and Zhang, F., 2005, “Critical Conditions for Ignition of Aluminum Particles in Cylindrical Charges,” Proc. of 14th APS Topical Conference on Shock Compression of Condensed Matter, Baltimore, MD, Jul. 31 – Aug. 5, 2005.**Frost, D.L.**, Zarei, Z., and Zhang, F., 2005, “Instability of Combustion Products Interface from Detonation of Heterogeneous Explosives,” Proc. of 20th Int. Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Que, Jul. 31 – Aug. 5, 2005.

Zarei, Z., **Frost, D.L.**, Donahue, L., and Whitehouse, D.R., 2005, “Simplified Modeling of Non-Ideal Blast Waves from Metallized Heterogeneous Explosives,” Proc. of 20th Int. Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Que, Jul. 31 – Aug. 5, 2005.

Katrina Brandstadt, **David L. Frost**, and Janusz A. Kozinski, 2005, “Nano- and Micrometer-Scale Aluminum Powder Oxidation in Carbon Dioxide,” Proceedings of 6-ISICP: Sixth International Symposium on Special Topics in Chemical Propulsion, Advancements in Energetic Materials and Chemical Propulsion, March 8-11, 2005, Santiago de Chile.

## HABASHI, W.G.

### Refereed Conference Proceedings

Morency, F., Wang, H.Z., **Habashi, W.G.**, Nadarajah, S., Pueyo, A. and Kafyeke, F. “Thermal Validation of FENSAP-ICE Anti-Icing Procedure”, 11th CASI Aerodynamics Symposium, Toronto, April 2005.

Remaki, L., and **Habashi, W.G.,** “Toward an Optimal Initial Grid for CFD”, 43rd AIAA Aerospace Sciences Meeting, Reno, January 2005.

L. Remaki and **W.G. Habashi**, “Pacing CFD: automatic mesh adaptation as an efficient tool to improve CFD accuracy”, International Journal of Computational Fluid Dynamics, Vol. 19, N0. 8, pp. 571-580, November 2005.

(see also Nadarajah, S.)

## HIGGINS, A.J.

### Journal Publications:

Ng, H.D., Radulescu, M.I., **Higgins, A.J.**, Nikiforakis, N., and Lee, J.H.S., “Numerical Investigation of the Instability for One-Dimensional Chapman-Jouguet Detonations with Chain-Branching Kinetics,” Combustion Theory and Modelling, Volume 9, Number 3, August 2005, pp. 385 - 401.

Ng, H.D., **Higgins, A.J.**, Kiyanda, C.B., Radulescu, M.I., Lee, J.H.S., Bates, K.R., Nikiforakis, N., “Nonlinear Dynamics and Chaos Analysis of One-Dimensional Pulsating Detonations,” Combustion Theory and Modelling, Volume 9, Number 1, February 2005, pp. 159 - 170.

### Refereed Conference Proceedings

Petel, O.E., **Higgins, A.J.**, Yoshinaka, A.C., and Zhang, F, “Effect of Shock Compression on the Critical Diameter of Liquid Explosives,” Shock Compression of Condensed Matter–2005, American Institute of Physics, Baltimore, Maryland, July 31- August 5, 2005.

Petel, O.E., and **Higgins, A.J.**, “Comparison of Failure Thickness and Critical Diameter of Nitromethane,” Shock Compression of Condensed Matter–2005, American Institute of Physics, Baltimore, Maryland, July 31- August 5, 2005.**Higgins, A.J.**, “The Effect of Discrete Energy Sources on Detonation Propagation,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

Kiyanda, C.B., and **Higgins, A.J.**, “Photographic Study of the Two-Dimensional Dynamics of Irregular Detonation Waves ,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.**Higgins, A.J.**, Knowlen, C., and Kiyanda, C.B., “Gasdynamic Operation of Baffled Tube Ram Accelerator in Highly Energetic Mixtures,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

Tanguay, V., and **Higgins, A.J.**, “On the Inclusion of Frictional Work in Non-Ideal Detonations,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

Mamen, J., Goroshin, S., and **Higgins, A.J.**, “Spectral Structure of the Aluminum Dust Flame,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

El-Saadi, R., Tanguay, V. , and **Higgins, A.J.**, “Combustion of Bulk Metals in Supersonic Flow,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

Tanguay, V. , Goroshin, S., **Higgins, A.J.**, Yoshinaka, A., and Zhang, F., “Reaction of Metal Particles in Gas-Phase Detonation Products,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

Tanguay, V. and **Higgins, A.J.**, “Simple Analytical Model for Metal Particle Ignition in Condensed Explosive,” 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Quebec, July 31 - August 5, 2005.

(see also Lee, J.H.S.)

## HUBERT, P.

### Refereed Conference Proceedings

Dubé, M., **Hubert, P.**, Yousefpour, P. and Denault, J., "Mechanical Performance of Resistance-Welded Thermoplastic Composite Skin/Stringer Specimen", 37th International SAMPE Technical Conference, Seattle, WA, October 31-November 3 2005.**Hubert, P.**, Lemire, D., Grimsley, B.W., Loos, A.C. and Cano, R.J., “Sensitivity Analysis of the Infusion Process for Fabrication of Tailored Composite Structures”, The 5th Canadian International Composites Conference, Vancouver, BC, August 16-19 2005.

Petrescue, L., **Hubert, P.**, Gordon, S., Johnston, A. and Munro, M., “Process-induced Defects in Low-Cost Resin-Infused Aeronautical Structures”, The 5th Canadian International Composites Conference, Vancouver, BC, August 16-19 2005.

Li, C., Johnston, A. and **Hubert, P.**, “Development of Process Maps for a High-Temperature Liquid Moulding Process”, The 5th Canadian International Composites Conference, Vancouver, BC, August 16-19 2005.

Haider, M., **Hubert, P.**, Lessard, L., St-Amant, E. and Trochu, F., “Factors Affecting the Surface Finish of Composite Automotive Components Manufactured by RTM”, The 5th Canadian International Composites Conference, Vancouver, BC, August 16-19 2005.

Yousefpour, A., Hojjati, M., Talbot, E. and **Hubert, P.**, “Manufacturing Process Modeling of Resistance Welding”, The 5th Canadian International Composites Conference, Vancouver, BC, August 16-19 2005.

Talbot, E., Yousefpour, A., **Hubert, P.** and Hojjati, M., "Thermal Behaviour During Thermoplastic Composites Resistance Welding", ANTEC 2005, Boston, MA, May 1-5 2005.**Hubert, P.**, Pazdzior, P., Johnston, A. and Djokic, D., "Development of Residual Stresses During E-Beam Processing", 50th SAMPE International Symposium, Long Beach, CA, May 1-5 2005.

Li, C., Johnston, A., Petrescue, L., Djokic, D., Cole, K.C., Chen, J-H and **Hubert, P.**, "Development of a Cure Kinetics Model for an EB-Cured Epoxy Resin", 50th SAMPE International Symposium, Long Beach, CA, May 1-5 2005.

Loos, A.C., Grimsley, B.W., Cano, R.J. and **Hubert, P.**, "VARTM Processing of Tailored Composite Structures for Aerospace Applications", 50th SAMPE International Symposium, Long Beach, CA, May 1-5 2005.**Hubert, P.**, Khoun, L. Petrescue, L., Johnston, A. and Gordon, S., “Processing Variability in Low-Cost VARTM Aeronautical Structures",. SAMPE Europe 26th International Conference, Paris, France, April 5-7 2005.

Ashrafi, B., **Hubert, P.** , and Vengallatore, S., (2005), “Are Polymer-Matrix Nanocomposites Useful Structural Materials for Microsystems?” Proceedings of the 20th Canadian Congress of Applied Mechanics, 30 May – 2 June 2005, Montreal, QC, Canada, pp. 137 -138.

(see also Lessard, L.)

## KÖVECSES, J.

### Book Chapters

Stépán, G., Kovács, L.L. and **Kövecses, J.**, 2005, "Bifurcations Caused by Sampling Effects in Robotic Force Control". in Vibration Control of Nonlinear Mechanisms and Structures (eds: H. Ulbrich and W. Gunthner) Solid Mechanics and Its Applications Series, Vol. 130., Springer, Dordrecht, pp. 331-342.

### Refereed Conference Proceedings

Kovács, L.L. **Kövecses, J.** and Stépán, G., 2005, "Dynamic behavior of robots with digital force control", Proceedings of the 8th Conference on Dynamical Systems Theory and Application, December 12-15, 2005, Lodz, Poland, pp. 335-342.

Modarres Najafabadi, S.A., **Kövecses, J.** and Angeles, J., 2005, “A Comparative Study of Approaches to Dynamics Modeling of Contact Transitions in Multibody Systems”. 2005 ASME International Design Engineering Technical Conferences, 5th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Long Beach, California, Sep. 24-28, DETC 2005-85418.**Kövecses, J.**, Kovács, L.L. and Stépán, G., 2005, “Stability of Multibody Systems with Digital Force Feedback”. presented at the 5th EUROMECH Nonlinear Dynamics Conference, Eindhoven, The Netherlands, August 7-12, Abstract MS-03-339.

Modarres Najafabadi, S.A., **Kövecses, J.** and Angeles, J., 2005, “Dynamic Analysis and Control of Contact Transitions in Unilaterally Constrained Mechanical Systems”. 2005 Eccomas Thematic Conference on Computational Multibody Dynamics, Madrid, Spain, June 21-24.**Kövecses, J.**, 2005, “A Forward Dynamics Algorithm for State- and Phase-Space Based Simulations of Multibody Systems”. 20th Canadian Congress of Applied Mechanics, Montreal, Québec, May 30- June 2, pp. 158-159.

Modarres Najafabadi, S.A., **Kövecses, J.** and Angeles, J., 2005, “Approaches to Modelling and Control of Contact Transitions in Mechanical Systems with Time-Varying Topology”. 20th Canadian Congress of Applied Mechanics, Montreal, Québec, May 30- June 2, pp. 419-420.

Kovács, L.L., Stépán, G. and **Kövecses, J.**, 2005, “A Case Study on the Stability of Digital Force Control of Robotic Manipulators”. 20th Canadian Congress of Applied Mechanics, Montreal, Québec, May 30- June 2, pp. 427-428.

Modarres Najafabadi, S.A., **Kövecses, J.** and Angeles, J., 2005, “An Approach to Modelling and Analysis of Unilaterally Constrained Mechanical Systems”. 2005 CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Saint-Hubert, Québec, May 26-27, CCToMM-N08.

Kovács, L.L., Stépán, G. and **Kövecses, J.**, 2005, “Discrete-Time Stability and Vibrations of Systems with Unidirectional Force Control”. 2005 CCToMM Symposium on Mechanisms, Machines, and Mechatronics, Saint-Hubert, Québec, May 26-27, CCToMM-P17.

## LEE, J.H.S.

### Journal Publications:

**Lee, J.H.S.** and Radulescu, M.I., (2005), “On the Hydrodynamic Thickness of Cellular Detonations”, Combustion, Explosion and Shock Waves, pp. 745-765

Chao, J., Otsuka, T. and **Lee, J.H.S.**, (2005), “An experimental investigation of the onset of detonation”, Proceedings of the Combustion Institute 30, pp.1889-1897

Goroshin, S, Camargo, L., **Lee, J.H.S.**, (2005), “Liquid flame: combustion of metal suspensions in liquid sulfur”, Proceedings of the Combustion Institute 30, pp. 2561-2568

Radulescu, M.I., Sharpe, G.J., **Lee, J.H.S.**, Kiyanda, C., Higgins, A.J., Hanson, R.K., “The Ignition Mechanism in Irregular Structure Gaseous Detonations,” Proceedings of the Combustion Institute, Vol. 30, 2005, pp. 1859-1867.

### Refereed Conference Proceedings

Ng, H.D., Zhu,Y.J. and **Lee, J.H.S.**, (2005), “Study of Detonation Sensitivity of Hydrogen-Air Mixture Using an Updated Comprehensive Chemical Kinetic Mechanism”, Proceedings of the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, McGill University, Montreal, Canada, July 31 to August 5, 2005.

Botros, B.B., Zhu, Y.J., Ng, H.D. and **Lee, J.H.S.**, (2005), “The unsteady dynamics of the head-on collision between a detonation and a shock wave”, Proceedings of the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, McGill University, Montreal, Canada, July 31 to August 5, 2005.

Ng, H.D., Chao, J., and **Lee, J.H.S.**, (2005), “The Role of Turbulent Transport for Detonation Initiation at a Turbulent Interface ”, Proceedings of the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, McGill University, Montreal, Canada, July 31 to August 5, 2005.

(see also Higgins, A.)

## LEE, T.

### Journal Publications

Birch, D. and **Lee, T.**, (2005) ?Investigation of the near-field tip vortex behind an oscillating wing,? Journal of Fluid Mechanics, Vol. 544, pp. 201-241.

Birch, D. and **Lee, T.**, (2005) ?Tip vortex behind a wing undergoing deep-stall oscillation,? AIAA Journal, Vol. 43, No. 10, pp. 2081-2092.

Gerontakos, P. and **Lee, T.**, (2005) ?PIV study of an airfoil with LERC control,? Journal of Aircraft, Vol. 42, No. 2, pp. 561-567.

Birch, D. and **Lee, T.**, (2005) ?Effect of trailing-edge flap on the tip vortex flow,? Journal of Aircraft, Vol. 42, No. 2, pp. 442-447.

Gerontakos, P. and **Lee, T.**, (2005) ?Near-field tip vortex behind a swept and tapered wing model,? Experiments in Fluids, Vol. 40, pp. 141-155.

Birch, D. and **Lee, T.**, (2005) ?Tip vortex behind a wing oscillated with small amplitude,? Journal of Aircraft, Vol. 42, No. 5, pp. 1200-1208.

### Refereed Conference Proceedings

Gerontakos, P., Birch, D., and **Lee, T.**, (2005) ?Tip vortex behind a swept wing with winglet,? 20th CANCAM, May 30-June 2, McGill University, pp. 197-198.

Gerontakos, P. and **Lee, T.**, (2005) ?Oscillating wing loading with small trailing-edge strips,? 20th CANCAM, May 30-June, McGill University, pp. 230-231.

## LESSARD, L.

### Journal Publications

Hosseinzadeh, R., Shokrieh, M., **Lessard, L.**, "Parametric Study of Automotive Composite Bumper Beams Subjected to Low-Velocity Impacts," Composite Structures Vol. 68, pp. 419-427. --(see also Hubert, P.)

## MATEESCU, D.

### Referred Conference Proceedings

Abdo, M. and **Mateescu, D.** “Low Reynolds number aerodynamics of airfoils at incidence”. Applied Aerodynamics Conference, 43rd AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2005, AIAA Paper 2006-1038, pp. 1-26.**Mateescu, D.**, Mei, C-B. and Zuppel, E., “Computational solutions of unsteady confined viscous flows with variable inflow velocities for unsteady fluid-structure interaction problems”. Proceedings of the Symposium of Flow-Induced Vibrations-2005, ASME PVP Conference, Denver, Colorado, July 2005, ASME Paper PVP2005-71777, pp. 1-11.

Han, Y., **Mateescu, D.** and Misra, A.K. “A method for crack detection in structures using piezoelectric sensors and actuators”. Proceedings of the International Conference on MEMS, NANO and Smart Systems, Banff, Alberta, July 2005, pp. 353-354.

Abdo, M. and **Mateescu, D.** “ Low Reynolds number aerodynamics of airfoils at incidence”. Applied Aerodynamics Conference, 43rd AIAA Aerospace Sciences Meeting, Reno, Nevada, January 2005, AIAA Paper 2006-1038, pp. 1-26.

Zuppel, E. and **Mateescu, D.** Computational solutions for steady and unsteady viscous flows. 20th Canadian Congress of Applied Mechanics, Montreal, 30 May-2 June 2005, pp. 249-250.

## MISRA, A.K.

### Journal Publications

Parsa, K., **Misra, A.K.** and Angeles, J. 2005, “Control of macro-micro manipulators revisited”, ASME Journal of Dynamic Systems, Measurement and Control, Vol. 127, Vol. 4, pp. 688-699.

Lanoix, E.L.M., **Misra, A.K.**, Modi, V.J. and Tyc, G., “Effect of electrodynamic forces on the orbital dynamics of tethered satellites”, Journal of Guidance, Control and Dynamics, Vol. 28, No. 6, 2005, pp. 1309-1315.

Wong, B. and **Misra, A.K.**, “Dynamics of Lagrangian point multi-tethered satellite systems”, Journal of the Astronautical Sciences, Vol. 53, No. 3, 2005, pp. 221-250.

### Refereed Conference Proceedings

Landry, M.A., Pelletier, F.J., **Misra, A.K.** and Ng, A., "Rendezvous and formation flying related to the TECSAS mission", Proceedings of the 4th International Workshop on Satellite Constellations and Formation Flying, Sao Jose dos Campos, Brazil, February 2005, pp. 106-113.

Landry, M.A., **Misra, A.K.**, Heald, J.C., Pelletier, F.J. and Ng, A., “Trajectory analysis of the terminal rendez vous phase of the TECSAS mission”, AAS/AIAA Astrodynamics Specialists Conference, Lake Tahoe, CA, Aug. 2005, Paper No. AAS-05-408.

Wong, B. and **Misra, A.K.**, “Planar dynamics of a variable length multi-tethered satellite system near the Sun-Earth Lagrangian point”, AAS/AIAA Astrodynamics Specialists Conference, Lake Tahoe, CA, Aug. 2005, Paper No. AAS-05-346.

Pizarro-Chong, A. and **Misra, A.K.**, “Dynamics of spinning multi-tethered satellite formations containing a central body”, 56th International Astronautical Congress, Fukuoka, Japan, Oct. 2005, Paper No. IAC-05-C1.4.01.

(see also Mateescu, D. and Païdoussis, M.P.P.)

## MONGRAIN, R.

### Journal Publications

Cartier R., Ranga A., **Mongrain R.**, “Aortic Root Reconstruction: From Principles to Numerical Modeling”, Canadian Journal of Cardiology, 21, (12), 1071-1076, 2005 (article, indexed in Pubmed, impact factor: 1.297).**Mongrain R.**, Leask R., Brunette J., Faik I., Bulman-Fleming N., Nguyen T.,” Numerical Modeling of Coronary Drug Eluting Stents”, Studies in Health Technology and Informatics, 113, 443-458, 2005 (article, indexed in Cisti, Pubmed).**Mongrain R.**, Leask R., Galaz R., Ranga A., Brunette J., Joshi A., Tardif J.-C., Bertrand O.F., “Image Based Biomechanics of Coronary Plaque”, Studies in Health Technology and Informatics, 113, 443-458, 2005 (article, indexed in Cisti, Pubmed).

Sherknies D., Meunier J., **Mongrain R.**, Tardif J.-C., “Three-Dimensional Trajectory Assessment of an IVUS Transducer From Single-Plane Cineangiograms: A Phantom Study”, IEEE Transactions on Biomedical Engineering, 52, (3), 543-549, 2005 (article, indexed in Articlefirst, Cisti, Pubmed, impact factor: 1.815)

### Refereed Conference Proceedings

**Mongrain R.**, Galaz R., Bulman-Fleming N., Ruzzeh B., Bertrand O.F., Tardif J.-C., “Multidisciplinary Design Optimization of Stents” , Proceedings of the ASME Summer Bioengineering Conference ISBN 0-9742492-1-1, Vail, Colorado, June 22 - 26, 2005.

Ranga A., Bouchot O., Cartier R., **Mongrain R.**, “Fluid-Structure Interaction in the Aortic Valve: A Tool for Surgical Evaluation”, Proceedings of the ASME Summer Bioengineering Conference ISBN 0-9742492-1-1, Vail, Colorado, June 22 - 26, 2005.

Rouleau L., Farcas M., Tardif J.-C., Merhi Y., **Mongrain R.**, Thorin E., Leask R.L., “Development of an Asymmetric Stenosis Model to Study the Interaction of Platelets and Endothelial Cells”, to be presented at European Medical & Biological Engineering Conference, Prague Czech Republic November 20-25, 2005.

Choudhury N., Butany J., Cartier R., **Mongrain R.**, Leask R.L., “Evaluation of the Regional Variation in Human Ascending Aortic Tissue” , to be presented at European Medical & Biological Engineering Conference, Prague Czech Republic November 20-25, 2005.

Rouleau L., Laurier J., Maltais C., L’Heureux N., Leask R., **Mongrain R.**, Cartier R., “Local Differences in the Mechanical Properties of Fixed and Fresh Aortic Tissues”, Proceedings of the American Heart Association Conference, Dallas, Texas, abstract # 05-SS-A-9270, Nov 2005.

Ranga A., Bouchot O., **Mongrain R.**, Cartier R., “The Virtual Aortic Valve : Evaluation of Surgical Reconstruction Techniques”, Proceedings of the American Heart Association Conference, Dallas, Texas, abstract # 05-SS-A-9295, Nov 2005.

Gennisson J.L., Fromageau J., Schmitt C., Maurice R.L., **Mongrain R.**, Cloutier G., “Assessment of Mechanical Properties of PVA-C with Four Different Elastographic Methods”, Proceedings of the 4th International Conference on the Ultrasonic Measurement and Imaging of Tissue Elasticity, Austin, Texas, Oct 16-19, 2005.

Ranga A., Bouchot O., **Mongrain R.**, Cartier R., “Fluid-Structure Interaction Simulations in the Aortic Valve: Evaluation of Surgical Reconstruction Techniques”, Proceedings of the 3rd Biennial Meeting of the Society for Heart Valve Disease, abstract # 104, June 17-20, Vancouver, 2005.

Ranga A., Bouchot O., **Mongrain R.**, Cartier R., “Computational Simulations of the Aortic Valve Validated by Imaging Data : Evaluation of Valve-Sparing Techniques”, Proceedings of the 4th EACTS (European Association for Cardio-Thoracic Surgery)-ESTS (European Society of Thoracic Surgeons), Joint Meeting, Barcelona Spain, Abstract # 26342, September 22-28, 2005.

Ranga A., Bouchot O., **Mongrain R.**, Cartier R., “The Virtual Aortic Valve - Evaluation of Surgical Reconstruction Techniques”, Proceedings of the CCC 2005 Canadian Cardiovascular Congress, Montreal, October 22-26, 2005.

Rouleau L., Laurier J., Maltais C., L’Heureux N., Leask R., **Mongrain R.**, “Local Differences in the Mechanical Properties of Fixed and Fresh Aortic Tissue”, Proceedings of the Canadian Cardiovascular Congress, Montreal, October 22-25, abstract # 4174, 2005.

Choudhury N., Butany J., Cartier R., **Mongrain R.**, Leask R. L., “Regional Variation in Human Ascending Aortic Tissue”, to be presented at the Canadian Cardiovascular Congress, Montreal, October 22-26, 2005.

Rouleau L., Leask R., **Mongrain R.**, Delorme S., Cartier R., “Effect of Formalin on the Local Mechanical Properties of Aortic Tissues”, Proceedings of CANCAM 2005 20th Canadian Congress of Applied Mechanics, May 30 – June 2, Montreal, pp. 120-121, 2005.**Mongrain R.**, Rousselin P., Nguyen T., Tardif J.-C., “Development of a non-Newtonian Blood Analog for Flow Visualization and Hemolysis Investigations”, Proceedings of CANCAM 2005 20th Canadian Congress of Applied Mechanics, May 30 – June 2, Montreal, pp. 109-110, 2005.

Ranga A., **Mongrain R.**, Leask R., Bouchot O., Cartier R., “Modeling of Blood in Fluid-Structure Interaction Simulations”, Proceedings of CANCAM 2005 20th Canadian Congress of Applied Mechanics, Montreal, May 30 – June 2, pp. 105-106, 2005.

Jourdain M., Meunier J., Tardif J.-C., **Mongrain R.**, “3D Reconstruction of an IVUS Transducer Trajectory with a Single View in Cineangiography”, Proceedings of SPIE Medical Imaging, San Diego, USA, 5747, pp. 1430, 2005.

Rousselin P., **Mongrain R.**, Tardif J.-C., “Development of a Non-Newtonian Blood Analog for PIV Experiments”, Proceedings of the 3rd International Symposium on Advanced Biomaterials/Biomechanics, April, 2005, Montréal, Canada, abstract # IS 165.

Faik I., **Mongrain R.**, Bertrand O.F., “3D Characterization of the Wall Shear Stress in a Stented Coronary Artery”, Proceedings of the 3rd International Symposium on Advanced Biomaterials/Biomechanics, April, 2005, Montréal, Canada, abstract # IS 183.

## MYDLARSKI, L.

### Invited Lecture

Differential Diffusion in a Turbulent Jet. Cornell Fluid Dynamics Seminar Series, Cornell University, Ithaca, NY, USA, 8 November, 2005.

### Journal Publications

Lavertu R.A. and **Mydlarski, L.**, 2005 “Scalar mixing from a concentrated source in turbulent channel flow”, Journal of Fluid Mechanics, Vol. 528, pp. 135-172.

McAlpine L., Gandell T., Winer L., Gruzleski J., **Mydlarski, L.**, Nicell J. and Harris R., 2005.“A collective approach towards enhancing undergraduate engineering education”, European Journal of Engineering Education, Vol. 30, No. 3, pp. 377 - 384.

### Refereed Conference Proceedings

Lavertu, T., Gaskin, S. and **Mydlarski, L.**, 2005. “Effects of radial position and Reynolds number in differential diffusion in a turbulent jet”, Proceedings of the Twentieth Canadian Congress of Applied Mechanics, pp. 587-588.

Costa-Patry, E. and **Mydlarski, L.**, 2005. “Covariance of passive scalars emitted from concentrated sources in turbulent channel flow”, Proceedings of the Twentieth Canadian Congress of Applied Mechanics, pp. 577-578.

Costa-Patry, E. and **Mydlarski, L.**, 2005. “Mixing of two scalars in turbulent channel flow”, Bulletin of the American Physical Society, Volume 50, No. 9, p. 120-121.

Lavertu, T., Wahab, A., **Mydlarski, L.** and Gaskin, S., 2005. “The effect of background turbulence on differential diffusion in a turbulent jet”, Bulletin of the American Physical Society, Volume 50, No. 9, p. 121.

## NADARAJAH, S.

### Journal Publications

**Nadarajah, Siva**; Jameson, Antony; Alonso, Juan, "Adjoint-Based Sonic Boom Reduction for Wing-Body Configurations in Supersonic Flow," Canadian Aeronautics and Space Journal, Vol. 51, No. 4, pp. 187-199, December 2005.

### Refereed Conference Proceedings

**Nadarajah, Siva**; McMullen, Matthew, and Jameson, Antony. "Non-Linear Frequency Domain Based Optimum Shape Design for Unsteady Three-Dimensional Flows," AIAA Paper 2006-1052, 44th Aerospace Sciences Meeting and Exhibit, January 9 - 12, 2006, Reno, Nevada.

Kachra, Farid; **Nadarajah, Siva**, "Aeroelastic Solutions using the Time Accurate and Non-Linear Frequency Domain Methods," AIAA Paper 2006-0445, 44th Aerospace Sciences Meeting and Exhibit, January 9 - 12, 2006, Reno, Nevada.

Remaki, L; **Nadarajah, S.**; Habashi, W; Bogstad, M; Kho, C; Mokhtarian, " On A-Posteriori Error Estimation in Mesh Adaptation to Improve CFD Solutions," AIAA Paper 2006-0890, 44th Aerospace Sciences Meeting and Exhibit, January 9 - 12, 2006, Reno, Nevada.

## NAHON, M.

### Book Chapter

**Nahon, M.**, Lambert, C., Chalmers, D. and Bo, W., 2005, "Model Validation and Performance Evaluation for the Multi-Tethered Aerostat Subsystem of the Large Adaptive Reflector", in P. J. Hall (editor), The Square Kilometer Array: An Engineering Perspective, Springer, Dordrecht, pp. 163-175.

### Journal Publications

Carretero, J. and **Nahon, M.**, 2005, "Solving Minimum Distance Problems with Convex or Concave Bodies Using Combinatorial Global Optimization Algorithms", IEEE Transactions on Systems, Man and Cybernetics, Vol. 35, No. 6, pp. 1144-1155.

### Refereed Conference Proceedings

Luo, L. and **Nahon, M.**, 2005, "A Contact Dynamics Model for Space Robotic Systems", CANCAM 2005 (20th Canadian Congress of Applied Mechanics), Montreal, Canada, May 30-June 2.

Coulombe-Pontbriand, P. and **Nahon, M.**, 2005, "Experimental Characterization of a Tethered Spherical Helium Balloon in an Outdoor Environment", CANCAM 2005 (20th Canadian Congress of Applied Mechanics), Montreal, Canada, May 30-June 2.

Deschesnes, F. and **Nahon, M.**, 2005, "Design Improvements for a Multi-Tethered Aerostat System", AIAA Atmospheric Flight Mechanics Conference, San Francisco, California, USA, Aug. 15-18.

Georgiades, C., Buehler, M. and **Nahon, M.**, 2005, "Simulation of an Underwater Hexapod Robot", 14th International Symposium on Unmanned Untethered Submersible Technology, Durham, New Hampshire, USA, Aug. 21-24.

Luo, L. and **Nahon, M.**, 2005, "A compliant Contact Model including interference geometry for Space robotic systems", Proceedings of the ASME International Design Conferences, Vol. 6, pp. 487-496, Long Beach, California, USA, Sept. 24-28.

Lambert, C. and **Nahon, M.**, 2005, "Study of a Multi-tethered Aerostat System – Experimental Observations and Model Validation", AIAA 16th Lighter-than-Air and Balloon Systems, Arlington, Virginia, USA, Sept. 26-28.

Coulombe-Pontbriand, P. and **Nahon, M.**, 2005, "Simulation and Validation of a Tethered Spherical Balloon in an Outdoor Environment", AIAA 16th Lighter-than-Air and Balloon Systems, Arlington, Virginia, USA, Sept. 26-28.

Miller, J. and **Nahon, M.**, 2005, "The Design of Robust Helium Aerostats", AIAA 16th Lighter-than-Air and Balloon Systems, Arlington, Virginia, USA, Sept. 26-28.

## NEMES, J.A.

### Journal Publications

Qu J., Dabboussi, W., Hassani F., **Nemes, J.A.** and Yue,S., - 2005. “Effect of Microstructure on Static and Dynamic Mechanical Property of a Dual Phase Steel Studied by Shear Punch Testing”. The Iron and Steel Institute of Japan (ISIJ International), Vol. 45, pp. 1741-1746.

Bande G., and **Nemes, J.A.** – 2005. “A New Approach for Single Crystal Materials Analysis: Theory and Application to Initial Yielding”. Journal of Engineering Materials and Technology, Vol. 127, pp. 119-127.

Dabboussi, W., and **Nemes, J.A.**. - 2005. “Modeling of Ductile Fracture Using the Dynamic Punch Test”. International Journal of Mechanical Sciences, Vol. 47, pp. 1282-1299.

Sabih, A., Wanjara P., and. **Nemes, J.A.** - 2005. “Characterization of Internal Voids and Cracks in Cold Heading of Dual Phase Steel”. The Iron and Steel Institute of Japan (ISIJ International), Vol. 45, pp. 1179-1186.

Milani, A.S., Shanian, A., Madoliat, R., and **Nemes, J.A.**, 2005, “The Effect of Normalization Norms in Multiple Attribute Decision Making Models: A Case Study in Gear Material Selection”, Structural and Multidisciplinary Optimization, Vol. 29, pp. 312-318.

### Refereed Conference Proceedings

Ragai, I., and **Nemes, J.A.** - 2005. “Experimental Investigation of Springback of Dual-Phase Steels”. SAE 2005 World Congress, Detroit, Michigan, USA, April 11-14, SAE Technical Paper No. 2005-01-1332.

Dabboussi,W., Qu J., **Nemes, J.A.**, and Yue, S., - 2005. “On the Use of the Shear Punch Experiments in Determining Mechanical Properties of Various Dual Phase Steels”. SAE World Congress 2005, pp. 1-6.

## PAIDOUSSIS, M.P.

### Journal Publications

**Päidoussis, M.P.**, Sarkar, A., Semler, C., “A Horizontal Fluid-Conveying Cantilever: Spatial Coherent Structures, Beam Modes and Jumps in Stability Diagram”, Journal of Sound and Vibration, 2005, 280, 141-157.**Päidoussis, M.P.**, Semler, C., and Wadham-Gagnon, W., “A Reappraisal of why Aspirating Pipes do not Flutter at Infinitesimal Flow”, Journal of Fluids and Structures, 2005, 20,147-156.**Päidoussis, M.P.**, “Some Unresolved Issues in Fluid-Structure Interactions”, Journal of Fluids and Structures, 2005, 20, 871-890.

Karagiozis, K.N., **Päidoussis, M.P.**, Misra, A.K., and Grinevich, E., “An Experimental Study of the Nonlinear Dynamics of Cylindrical Shells with Clamped Ends Subjected to Axial Flow”, Journal of Fluids and Structures, 2005, 20, 801-816.

Karagiozis, K.N., **Päidoussis, M.P.**, and Misra, A.K., “Nonlinear Vibrations of Fluid-Filled Clamped Circular Cylindrical Shells”, Journal of Fluids and Structures, 2005, 21, 579-595.

Modarres-Sadeghi, Y., **Päidoussis, M.P.**, and Semler, C., “A Nonlinear Model for an Extensible Slender Flexible Cylinder subjected to Axial Flow”, Journal of Fluids and Structures, 2005, 21, 609-627.

### Refereed Conference Proceedings

**Päidoussis, M.P.**,and Misra, A.K., “Nonlinear Dynamics and Stability Analysis of Clamped Cylindrical Shells Subjected to Axial Flow”, Proceedings, 5th European Nonlinear Dynamics Conference (ENOC-2005), (eds D.H. van Campen, M.D. Lazurko, and W.P.J.M. van der Oever), paper 22-467 (CD Rom, ISBN 90 386 2667 3) pp. 2568-2575.

Wadham-Gagnon, W., **Päidoussis, M.P.**, and Semler, C., “Three-Dimensional Dynamics of Cantilevered Pipes Conveying Fluid on the Presence of an End-Mass”, Proceedings CANCAM 2005, McGill University, Montreal, QC, May-June 2005, pp 307-308.

Gosselin, F., **Päidoussis, M.P.**, and Misra, A.K., “Stability of Deploying/Extruding Beam in Dense Fluid”, Proceedings, CANCAM 2005,McGill University, Montreal, QC, May-June 2005, pp. 309-310.

Karagiozis, K.N., **Päidoussis, M.P.**, and Misra, A.K., “Stability of the Nonlinear Dynamics of Clamped Shells in Contact with Fluid”, Proceedings CANCAM 2005, McGill University, Montreal, QC, May-June 2005, pp. 312a-312b.

Amabili, M., Sarkar, A., and **Päidoussis, M.P.**, “Reduced-order POD Models for Nonlinear Vibrations of Fluid-Filled Circular Cylindrical Shells” , Proceedings CANCAM 2005, McGill University, Montreal, QC, May-June 2005, pp. 313-314.

De Langre, E., **Päidoussis, M.P.**, and Doaré,O., “Flutter of Long Cantilevered Cylinders in Axial Flow”, Proceedings CANCAM 2005, McGill University, Montreal, QC, May-June 2005, pp.325-326.

Modarres-Sadeghi, Y., **Päidoussis, M.P.**, and Semler, C., “Nonlinear Dynamics of Slender Flexible Cylinders Clamped at Both Ends and Subjected to Axial Flow”, Proceedings CANCAM 2005, McGill University, Montreal, QC. May-June 2005, pp 333-334.**Päidoussis, M.P.**, “Real-Life Experience with Flow-Induced Vibration”, Plenary Talk, Proceedings of the 4th Conference on Bluff Body Wakes and Vortex-Induced Vibrations (BBVIV4), (eds T. Leweke and C.H.K. Williamson), Santorini, Greece. June 2005, pp 1-8 .

Karagiozis, K.N., **Päidoussis, M.P.**, and Misra, A.K., “Nonlinear Dynamics and Stability Analysis of Clamped Cylindrical Shells Subjected to Axial Flow”, Book of Abstracts, 5th European Nonlinear Dynamics Conference (ENOC-2005), (eds. D.H. van Campen, M.D. Lazurko and W.P.J.M. van der Oever), Eindhoven, The Netherlands, August 2005, p. 335.

(see also Price, S.J.)

## PASINI, D.

### Refereed Conference Proceedings

**Pasini, D.**, 2005, “Shape Transformers for material and shape selection'', Proc. ASME 2005 Design Engineering Technical Conferences, Long Beach, California, USA, Sept. 24— 28, DETC2005-84894.**Pasini, D.**, 2005, ‘’ A graphical exploration of the general performance indices for bending stiffness design”, CDEN 2005 International Design Conference, From Inspiration to innovation. Kananaskis, Canada, July 18-20.

## PRICE, S.J.

### Journal Publications

Marsden, C.C. and **Price, S.J.** - 2005. “The aeroelastic response of a wing section with a structural freeplay nonlinearity: An experimental investigation”. Journal of Fluids and Structures, 21, 257-276.

Akbari, M.H. and **Price S.J.** - 2005. “Numerical investigation of flow patterns for staggered cylinder pairs in cross-flow”. Journal of Fluids and Structures, 20, 533-554.

### Refereed Conference Proceedings

Marsden, C.C. and **Price, S.J.**, 2005 An experimental investigation of the limit cycle oscillation of a structurally nonlinear two-dimensional airfoil in subsonic flow. In Proceedings of 20th Canadian Congress of Applied Mechanics, 90-91.

Pinto, W.T., **Price, S.J.** and Paidoussis, M.P. – 2005. “ An experimental investigation of the cross-flow around a pair of staggered cylinders with the downstream cylinder subject to forced transverse harmonic oscillation”. In Proceedings of 20th Canadian Congress of Applied Mechanics, 357-358.

Poirel, D. and **Price S.J.** - 2005. “Multi-modal probability structure of a LCO with random excitation— Application to an airfoil”. In Proceedings of 20th Canadian Congress of Applied Mechanics, 600-601.

## RADZISZEWSKI, P.

### Journal Publications

Satish, H., **Radziszewski, P.**, Ouellet, J. (2005), Design issues and challenges in lunar/martian mining applications, Mining Technology (Trans. Inst. Min. Metall. A), Vol. 114, pp. A107-A117.**Radziszewski, P.**, Varadi, R., Chenje, T., Santella, L., Sciannamblo, A. (2005), Tumbling mill steel media abrasion wear test development, Minerals Engineering, Vol. 18, No. 3, pp.333-341.**Radziszewski, P.**, Picard, B., Bourret, A-M., Brunet, J-P., Tétreault, M., Zaras,K., Cheriet, M., Ouellet, J. (2005), Particleboard surface roughness classification system modelling, simulation and bench testing, ASME Journal of Manufacturing Science and Engineering, Vol. 127, pp.677-686.

Orford, I., **Radziszewski, P.**, Larsen, C., Cooper, M., Renaud, M., Strah, L. (2005), Design and wear sag mill shell liners at Brunswick mines, CIM Bulletin, January/February, pp. 7.

### Refereed Conference Proceedings

**Radziszewski, P.**, Brunet, J.-P. (2005), Exploring the development of a Particleboard surface roughness classification system, ScanTech conference, Las Vegas, July.**Radziszewski, P.**, Poirier, J. (2005), Tensioning Circular Saws through the use of Shape Memory Alloys, SawTech conference, Las Vegas, July.

Satish, H., **Radziszewski, P.**, Ouellet, J. (2005), A Review Of Mining Technologies For Space, CDEN conference, Kananaskis, Alberta, July.**Radziszewski, P.**, Quan, Y. Y., Poirier, J. (2005),Design Parameters Affecting Tumbling Mill Natural Frequencies, CDEN conference, Kananaskis, Alberta, July.

Poirier, J., **Radziszewski, P.** (2005), Effective Stiffening of Thin Rotating Disks using Shape Memory Alloys, CDEN conference, Kananaskis, Alberta, July.

Arekar, C., **Radziszewski, P.**, Roy, D., Faucher, A., Caron, S. (2005), Liner Wear as a function of Abrasive and Impact Wear Mechanisms, CANCAM conference, Montreal, May/June, 382-383 .

Satish, H., **Radziszewski, P.**, Ouellet, J. (2005), Mining on Moon/Mars-A review, 20th CANCAM conference, Montreal, May/June, 370-371.

Martins, S., **Radziszewski, P.**, Li, W., Benson, C. (2005), An Instrumented Lifter for Tumbling Mill Wear Monitoring, CANCAM conference, Montreal, May/June, 380-381.

Poirier, J., **Radziszewski, P.** (2005), Compensating Stiffness in a Peripherally Heated Rotating Thin Disk, CANCAM conference, Montreal, May/June, 531-532.**Radziszewski, P.**, Quan, Y. Y., Poirier, J. (2005), Exploring Tumbling Mill Natural Frequencies, CANCAM conference, Montreal, May/June, 372-373.

## SHARF, I.

### Journal Publications

**Sharf, I.** and Bykov.,A., 2005, ''Compliance Optimisation for Robotic Assembly,'' International Journal of Robotics and Automation, Vol. 20, No. 3, pp. 177-191.

Boivin, E. and **Sharf, I.**, 2005, ''Optimum Grasp Planner and Vision-guided Grasping Using a Three-Finger Hand,'' Industrial Robot, Vol. 32, No. 1, pp. 35-42.

### Refereed Conference Proceedings

Rouleau, G., Verma, S., **Sharf, I.**, and Martin, E., 2005, ''Vision-based Tracking and Trajectory Generation for Robotic Capture of Objects in Space,'' Collection of Technical Papers - AIAA Guidance, Navigation, and Control Conference 2005, p 5937-5950, San Francisco, CA, August 15-18.

Agar, J., **Sharf, I.**, Lange C., and Gonthier, Y., 2005, ''Contact Parameter Estimation with a Space Robot Verification Facility,'' Proc. of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005, Vol. 6 A, 5th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, pp. 433-442, Long Beach, CA, September 24-28.

## THOMSON, V.

### Journal Publications

Shuiabi, E., **Thomson, V.**, Bhuiyan, N. “Entropy as a Measure of Operational Flexibility”, European Journal of Operations Research, 2005, Vol 165/3, pp 696-707

Iranmanesh, S., **Thomson, V.**, Salimi, M. “Design Parameter Estimation using a Modified QFD Method to Improve Customer Perception”, CERA, Vol 13, No 1, Mar 2005, pp 57-67

### Refereed Conference Proceedings

Girard P., DiRaddo R., **Thomson, V.**, Boulet B. “Advanced on-line adaptive control for thermoforming of large thermoplastic sheets”, 2005 SAE World Congress, Detroit, May 2005

Boulet B., **Thomson, V.**, Girard P., DiRaddo R., Haurani, A. “Advanced on-line adaptive control for thermoforming of large thermoplastic sheets”, The Sixth International Conference on Intelligent Processing and Manufacturing of Materials, May 2005

Ramudhin, A., Paquet, M. Artiba, A., Dupré, P., Varvaro, D., **Thomson, V.**, 2005. “Maintenance, Repair and Overhaul activities in the aerospace industry. A framework for better planning and execution of MRO activities using RFID”, International Conference on Industrial Engineering and Systems Management, May, Marrakech**Thomson, V.**, Lari, K. 2005. “Challenges in new applications of RFID”, International Conference on Industrial Engineering and Systems Management, May, Marrakech (invited paper)

Boulet B., DiRaddo R.W., Girard P., **Thomson, V.**, “The Use of Model Based Control for Highly Adaptive Manufacturing”, IMLF (International Manufacturing Leaders Forum), February 2005, Adelaide, Australia.

## TIMOFEEV, E.

### Journal Publications

Sun, M., Saito, T., Jacobs, P.A., **Timofeev, E.**, Ohtani, K., and Takayama, K., 2005, "Axisymmetric shock wave interaction with a cone: a benchmark test," Shock Waves, Vol. 14, No. 5-6, pp. 313-331

Kleine, H., **Timofeev, E.**, Takayama, K., 2005, “Laboratory-scale blast wave phenomena – optical diagnostics and applications'', Shock Waves, Vol. 14, No. 5-6, pp.343-357

Hassan, T., **Timofeev, E.**, Saito, T., Shimizu, H., Ezura, M., Matsumoto, Y., Takayama, K., Tominaga, T., and Takahashi, A., 2005, "A proposed parent vessel geometry-based categorization of saccular intracranial aneurysms: computational flow dynamics analysis of the risk factor for lesion rupture", Journal of Neurosurgery, Vol. 103, pp 662-680

### Refereed Conference Proceedings

Tanguay, V., Vu, P., Oliver, P.J., **Timofeev, E.**, and Higgins, A.J., 2005 "Effect of fill pressure on the precursor shock in the channel effect", 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, January 10-13, AIAA Paper 2005-0278, 10p.

Hassan, T., Saito, T., **Timofeev, E.**, Shimuzu, H., Ezura, M., Matsumoto, Y., Takayama, K., Tominaga, T., and Takahashi, A., 2005, “High aneurysmal wall temperature at their ruptured blebs – is it a true responsible factor for symptomatology of saccular intracranial aneurysms. Computational flow dynamics study,” 2nd International ymposium on Interdisciplinary Shock Wave Research, Sendai, Japan, March 2005

## VENGALLATORE, S.

### Journal Publications

**S. Vengallatore** (2005) “Gorsky Damping in Nanomechanical Structures,” Scripta Materialia, vol. 52, pp. 1265 – 1268.**S. Vengallatore** (2005) “Analysis of Thermoelastic Damping in Laminated Composite Micromechanical Beam Resonators,” Journal of Micromechanics and Microengineering, vol. 15, pp. 2398 – 2404.

### Refereed Conference Proceedings

M. Jensen, Y. Peles, **S. Vengallatore**, A. Kosar, C.H.-Kuo, “Enhanced Boiling Heat Transfer in Second-Generation Microchannels –Part A: Methods and Preliminary Results,” Proceedings of ICMM2005, ASME 3rd International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada (10 pages).**S. Vengallatore**, “Gorsky Damping in Nanomechanical Structures,” Proceedings of the 20th Canadian Congress of Applied Mechanics, 30 May – 2 June 2005, Montreal, QC, Canada, pp. 139 -140.**S. Vengallatore** (2005), “Thermoelastic Damping in Composite Micromechanical Beams,” 5th Canadian International Composites Conference (CANCOM), August 16 – 19, 2005, Vancouver, B.C., Canada. (CD-ROM, 12 pages)

(see also Hubert, P.)

## ZSOMBOR-MURRAY, P

### Journal Publications

Cebula, A.J. & **Zsombor-Murray, P.J.** (2005) "Formulation of the Workspace Equations for Wrist-Partitioned Spatial Manipulators", Mechanism & Machine Theory, v.41, n.7, pp.778-789.

O'Leary, P., Harker, M. & **Zsombor-Murray, P.J.** (2005) "Direct & Least Square Fitting of Coupled Geometric Objects for Metric Vision", IEE Vision, Image & Signal Processing, v.152, n.6, pp.687-694.

### Refereered Conference Proceedings

Rath, G., **Zsombor-Murray** & O'Leary, P. (2005) "Real Time Cutter Path Generation & Control of a Hydraulically Actuated Tunnelling Robot", Proc. ISR2005-36th Int. Symp. on Robotics, Tokyo, 05-11, 8pp.

O'Leary, P., Harker, M. & **Zsombor-Murray, P.J.** (2005) "Incremental Matrix Orthogonalization with an Application to Curve Fitting", IS&T/SPIE Symp. Electronic Imaging, San José, 05-01, 7pp.