Quick Links

mechanics

Mechanical Engineering

Programs | Application Procedures and Deadlines

 

Mechanical Engineering

Location

  • Department of Mechanical Engineering
  • Macdonald Engineering Building
  • 817 Sherbrooke Street West, Room MD-270
  • Montreal QC H3A 0C3
  • Canada
  • Telephone (Admissions & Scholarships): 514-398-8869
  • Telephone (All other inquiries): 514-398-6281
  • Fax: 514-398-7365
  • Email (Admissions & Scholarships): grad [dot] mecheng [at] mcgill [dot] ca
  • Email (All other inquiries): gradcoordinator [dot] mecheng [at] mcgill [dot] ca
  • Website: www.mcgill.ca/mecheng/grad

About Mechanical Engineering

Mechanical engineers are traditionally concerned with the conception, design, implementation, and operation of mechanical systems. Common fields of work include aerospace, energy, manufacturing, machinery, and transportation. Due to the broad nature of the discipline, there is usually a high demand for mechanical engineers with advanced training.

The Department includes more than 30 faculty members and 200 graduate students, and is housed primarily within the recently renovated Macdonald Engineering building. The Department contains state-of-the-art experimental facilities (including a major wind tunnel facility) and has extensive computational facilities. Professors within the Department collaborate widely with professors in other units, often through research centres including the Centre for Intelligent Machines (CIM); the McGill Institute for Advanced Materials (MIAM); and the Montreal Neurological Institute and Hospital (MNI). The research interests within the Department are very broad and fall largely within the following five areas:

  • aerodynamics, fluids, and thermal engineering
  • mechanics of materials and structures
  • dynamics and control
  • design and manufacturing
  • bioengineering

Within these areas, specific topics of research are given in the following:

Aerodynamics, fluids, and thermal engineering

Experimental fluid mechanics and aerodynamics, aeroelasticity, and aeroacoustics; theoretical fluid mechanics; turbulence; mixing in turbulent flows; fluid flow control; fluid-structure interactions; computational fluid dynamics, multidisciplinary optimization, and computer flow visualization; heat transfer; combustion, shock wave physics, energetic materials, high-speed reacting flows, hypersonic propulsion, and alternative fuels.

Mechanics of materials and structures

Composite materials: structural design, analysis, manufacturing, and processing; micro/nano mechanics; MEMS/NEMS; adaptronic structures; thermomechanics, wave propagation, and computational mechanics.

Dynamics and control

Multibody systems, legged and wheeled vehicles, compliant mechanisms, and kinematic geometry; tethered systems, lighter-than-air craft, and underwater vehicles; spacecraft dynamics and space robotics; modelling and simulation; fluid-structure interactions, nonlinear and chaotic dynamics; dynamics of bladed assemblies.

Design and manufacturing

Design theory and methodology, design optimization; biomimetics; machine tools and systems, manufacturing processes, and management and control; micro/nano machining; wear and comminution processes.

Bioengineering

Biomechanics, biomaterials, blood and respiratory flows, mechanics of soft tissues, cardiovascular devices, image processing for medical diagnostics, voice production.

Programs Offered

The Department offers programs of study leading to the M.Eng., M.Sc., and Ph.D. degrees in Mechanical Engineering. Both M.Eng. (Thesis) and M.Eng. (Non-Thesis) programs are offered.

There are several options for completing master’s degrees that do not involve the completion of a thesis. The M.Eng. (Non-Thesis) program has more extensive course requirements and will appeal to students who desire to gain both a broad understanding of subjects within Mechanical Engineering as well as in-depth information in a specific area. Two other non-thesis master’s degree options are described below.

Master of Engineering (M.Eng.); Mechanical Engineering (Thesis) (45 credits)
The M.Eng. (Thesis) program requires the completion of 16 credits of technical complementary courses, a seminar course, and a thesis. The thesis involves advanced research supervised by one or more professors who are internationally known in their field. This program prepares students for either an industrial research career or further academic research at the Ph.D. level.
Master of Engineering (M.Eng.); Mechanical Engineering (Thesis) — Computational Science and Engineering (46 credits)
For students who would like to concentrate on computational work for their research, the M.Eng. (Thesis) – Computational Science and Engineering (CSE) option is available. CSE is a rapidly growing multidisciplinary area with connections to the sciences, engineering, mathematics, and computer science. CSE focuses on the development of problem-solving methodologies and robust tools for the solution of scientific and engineering problems. In this program, students choose their complementary courses from within a list of scientific computing courses and courses that involve applications and specialized methods.
Master of Engineering (M.Eng.); Mechanical Engineering (Non-Thesis) (45 credits)
Students in this program must complete four required courses in addition to 16 credits of complementary courses and a seminar course. They also complete a project that is less involved than a thesis and may involve a limited research project, or a technical or design study. Graduates of this program are well-prepared for carrying out research and development in industry and may also proceed to further research at the Ph.D. level.
Master of Engineering (M.Eng.); Aerospace Engineering (Non-Thesis) (45 credits)

The M.Eng. Aerospace degree is offered to students who wish to specialize in the general area of aerospace engineering. This degree is given in conjunction with Concordia University, École Polytechnique, Université Laval, Université de Sherbrooke, and École de Technologie Supérieure. Students registered at McGill are required to take two courses from two other institutions.

The aerospace industry is strongly established in Quebec. Representatives of the aerospace industry therefore requested that measures be taken to provide for qualified scientists in aerospace. Five universities offering courses in engineering came together to offer a master’s degree program in the field of aeronautics and space technology. This program is offered to students who wish to specialize in these disciplines. The industry’s participation is a special feature of this program. The universities and the participating industries, with the cooperation of the Centre of Aerospace Manpower Activities in Quebec (CAMAQ), have formed a Coordinating Committee, CIMGAS, to arrange for industrial internships and case study courses for the students and to implement specific program developments to meet the needs of the industry.

The M.Eng. (Aerospace) program requires a minimum of 45 credits, including an “Industrial Stage” (i.e., engineering work in an aerospace industry) of four months. Enrolment is limited to the number of industrial stages available, so admission to the program is typically quite competitive. While intended to be a full-time program, the M.Eng. Aerospace program may be completed on a part-time basis over a maximum of five years. By the time of completion of the program, graduates are extremely well-prepared to enter into a career in the aerospace industry.

Depending on their background, students would specialize in one of the four areas:

  1. Aeronautics and Space Engineering
  2. Avionics and Control
  3. Aerospace Materials and Structures
  4. Virtual Environment
Master of Management (M.M.); Manufacturing Management (Non-Thesis) (56 credits)

This program is currently not offered

The Master in Manufacturing Management (M.M.M.) program attracts business professionals from around the world who wish to pursue a career in the effective management of global operations and supply chain. It is a professionally-oriented graduate program offered jointly through the Faculties of Engineering and Management, aimed at those candidates with engineering or science backgrounds.

In just eleven months of academic studies, M.M.M. students sharpen their expertise in supply chain and operations through an intensive program that includes:

  • A challenging curriculum
  • Extensive industrial interaction
  • Innovative research projects

Additionally, students are exposed to the latest trends and developments in management and participate in professional development seminars to leverage their communication and leadership skills. After less than one year of studies, participants complete a paid work term at an industrial location. This is a unique opportunity to work on a real-world project with an M.M.M. partner company in North America.

Master of Science (M.Sc.); Mechanical Engineering (Thesis) (45 credits)
Please consult the Department for more information on this program.
Doctor of Philosophy (Ph.D.); Mechanical Engineering
In the Ph.D. program, students are required to demonstrate a significant new contribution to their field of research, as documented in an externally reviewed thesis. The research is carried out under the supervision of professors who are leaders in their field. Since research in Mechanical Engineering is often interdisciplinary in nature, it is common for Ph.D. students to have a co-supervisor in addition to their principle supervisor. Graduates from this program typically proceed to careers in research in either industrial or academic environments.
Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Mechanical Engineering Admission Requirements and Application Procedures

Admission Requirements

The general rules of Graduate and Postdoctoral Studies apply. Candidates who come from other institutions are expected to have an academic background equivalent to the undergraduate curriculum in mechanical engineering at McGill or to make up any deficiencies in a Qualifying year.

Applicants to the M.Eng. (Thesis) program must hold an undergraduate degree (or equivalent) in Engineering. Applicants who hold an undergraduate degree in a non-Engineering discipline—typically the Physical Sciences—may apply for the M.Sc. (Thesis) program, which is governed by the same regulations as the M.Eng. (Thesis) program.

Applicants to the M.Eng. (Non-Thesis) program must hold an undergraduate degree (or equivalent) in Mechanical Engineering.

Applicants to the M.Eng. (Aerospace) program must hold an undergraduate degree (or equivalent) in Engineering.

Applicants to the Ph.D. program must have successfully completed a master's degree program (or equivalent) in Engineering or the Physical Sciences. In exceptional circumstances, students with outstanding performance at the bachelor's level may be offered direct entry into the Ph.D. program (Ph.D. 1).

In the case of all programs, applicants must have successfully completed their prior degree(s) with a minimum CGPA equivalent to 3.3 on a scale of 4.0. Satisfaction of these minimum requirements does not guarantee admission. Applicants to graduate studies whose mother tongue is not English, and who have not completed an undergraduate or graduate degree from a recognized foreign institution where English is the language of instruction or from a recognized Canadian institution (anglophone or francophone), must submit official results of either a TOEFL or an IELTS test. The minimum score required is 92 for the Internet-based TOEFL test, with each component score not less than 20 (or 580 on the paper-based test, with a minimum of 4.0 on the “Test of Written English”); or a minimum overall band of 7.0 on the IELTS test.

Application Procedures

McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.

See Application Procedures for detailed application procedures.

Please consult www.mcgill.ca/mecheng/grad for further details on required application documents.

Additional Requirements

The items and clarifications below are additional requirements set by this department:
  • two official Referee Reports
  • Personal Statement – one page
  • Curriculum Vitae – please include a list of publications, if relevant
  • proof of French proficiency (for Aerospace program only)

Application Deadlines

The application deadlines listed here are set by the Department of Mechanical Engineering and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at www.mcgill.ca/gps/contact/graduate-program.

Canadian International Special/Exchange/Visiting
Fall: Jan. 15 Fall: Jan. 15 Fall: Jan. 15
Winter: Oct. 15 Winter: Sept. 15 Winter: Oct. 15
Summer: N/A Summer: N/A Summer: N/A

Please also consult the Departmental website for the application deadlines: www.mcgill.ca/mecheng/grad/date.

Admission to graduate studies is competitive; accordingly, late and/or incomplete applications are considered only as time and space permit.

Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 31, 2014).

Civil Engineering and Applied Mechanics

Programs | Application Procedures and Deadlines

 

Civil Engineering and Applied Mechanics

Location

  • Department of Civil Engineering and Applied Mechanics
  • Macdonald Engineering Building, Room 492
  • 817 Sherbrooke Street West
  • Montreal QC H3A 0C3
  • Canada
  • Telephone: 514-398-6858
  • Fax: 514-398-7361
  • Email: gradinfo [dot] civil [at] mcgill [dot] ca
  • Website: www.mcgill.ca/civil

About Civil Engineering and Applied Mechanics

Advanced courses of instruction and laboratory facilities are available for Engineering graduate students who wish to proceed to the degrees of M.Eng., M.Sc., and Ph.D.

Graduate studies and research are at present being conducted in the fields of structures and structural mechanics; infrastructure rehabilitation; risk engineering; fluid mechanics and hydraulics; materials engineering; soil behaviour; soil mechanics and foundations; water resources engineering; environmental engineering; and transportation engineering.

M.Eng. in Civil Engineering

The master's degree can be pursued as a research degree (thesis) or as a coursework-based degree (project). The thesis degree is for those who wish to undertake research while the project degree is for those who wish to have a broader and more specialized training in civil engineering.

Master of Engineering (M.Eng.); Civil Engineering (Thesis) (45 credits)
Students obtain a deeper understanding of their area of specialty through courses selected with their supervisor. A two- to three-semester independent research project is undertaken in the field of structures and structural materials; infrastructure rehabilitation; risk engineering; fluid mechanics and hydraulics; materials engineering; soil behaviour; soil mechanics and foundations; water resources engineering; environmental engineering; and transportation engineering.
Master of Science (M.Sc.); Civil Engineering (Thesis) (45 credits)
Candidates with a bachelor's degree in a discipline other than Engineering, such as Science or Arts, may be accepted into an M.Sc. program in the Department. Such students would typically study in the fluid mechanics, water resources, environmental engineering, or transportation engineering areas, and would follow the thesis option program.
Master of Engineering (M.Eng.); Civil Engineering (Non-Thesis) (45 credits)
This is primarily a coursework degree with a small independent project.
Master of Engineering (M.Eng.); Civil Engineering (Non-Thesis) — Environmental Engineering (45 credits)
This program is offered to students with a university undergraduate degree in engineering who desire graduate education in the environmental engineering field. This non-thesis option is within the context of the existing M.Eng. (project option) programs currently offered in the Departments of Bioresource Engineering (Agricultural and Environmental Sciences); Chemical Engineering; Civil Engineering; and Mining, Metals, and Materials Engineering. This program emphasizes interdisciplinary fundamental knowledge courses, practical applications in diverse environmental contexts, and functional skills needed for solving environmental problems through a wide range of technical and non-technical courses offered by collaborating departments and faculties at the University. Candidates must possess a bachelor's degree in engineering. The Environmental Engineering option is administered by the Faculty of Engineering. Further information may be obtained from the Program Coordinator, Department of Civil Engineering and Applied Mechanics.
Doctor of Philosophy (Ph.D.); Civil Engineering
Research can be conducted in the fields of structures and structural mechanics; infrastructure rehabilitation; risk engineering; fluid mechanics and hydraulics; materials engineering; soil behaviour; soil mechanics and foundations; water resources engineering; environmental engineering; and transportation engineering.
Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Civil Engineering and Applied Mechanics Admission Requirements and Application Procedures

Admission Requirements

The general rules of Graduate and Postdoctoral Studies apply and are detailed in Graduate Admissions and Application Procedures. The minimum academic standard for admission is a cumulative grade point average (CGPA) of 3.0/4.0 in a recognized program. Alternatively, an equivalent grade point average of no less than 3.2/4.0 over the last two years of the program will be accepted.

Applicants to graduate studies whose mother tongue is not English, and who have not completed an undergraduate or graduate degree from a recognized foreign institution where English is the language of instruction or from a recognized Canadian institution (anglophone or francophone), must write the TOEFL (Test of English as a Foreign Language; preferably the Internet-based test) or the IELTS (International English Language Testing System). Ph.D. applicants must achieve a minimum overall score of 92 (or minimum 580 on the paper-based test), with a minimum score of 20 for each component (i.e., Writing, Reading, Speaking, Listening); or, achieve a minimum band score of 7 for the IELTS in order to apply. Master's applicants must achieve an overall minimum TOEFL score of 86 (or minimum 567 on the paper-based test), with a minimum score of 20 for each component; or, achieve a minimum band score of 6.5 for the IELTS in order to apply. Test results reach McGill approximately eight weeks after the test is taken; please note that it is the student's responsibility to make the necessary arrangements with the examining board to write the test in his/her country of residence. Full information about the test, and a registration form, may be obtained by consulting the TOEFL or the IELTS websites.

Application Procedures

McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.

See Application Procedures for detailed application procedures.

Application Deadlines

The application deadlines listed here are set by the Department of Civil Engineering and Applied Mechanics and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at www.mcgill.ca/gps/contact/graduate-program.

Canadian International Special/Exchange/Visiting
Fall: Jan. 15 Fall: Jan. 15 Fall: Jan. 15
Winter: Oct. 15 Winter: Sept. 15 Winter: Sept. 15
Summer: N/A Summer: N/A Summer: N/A
Note: Applications for Summer term admission will not be considered.
Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Social Media