Joint Ph.D. in Management Admission Requirements and Application Procedures
About the Joint Ph.D. in Management
- Ph.D. Program Office
- Desautels Faculty of Management
- McGill University
- 1001 Sherbrooke Street West
- Montreal QC H3A 1G5
- Telephone: 514-398-4060
- Fax: 514-398-3876
- Email: phd [dot] mgmt [at] mcgill [dot] ca
- Website: www.mcgill.ca/desautels/programs/phd
|Doctor of Philosophy (Ph.D.); Management|
The Ph.D. program in Management is offered jointly by the four Montreal universities: Concordia University, École des Hautes Études Commerciales (affiliated with the Université de Montréal), McGill University, and Université du Québec à Montréal. The program is intended to educate competent researchers and to stimulate research on management issues.
The Ph.D. program is offered jointly with three other institutions:
- Concordia University
- John Molson School of Business
- 1450 Guy Street
- Montreal QC H3H 0A1
- Website: www.concordia.ca/jmsb/programs/graduate/phd.html
- École des Hautes Études Commerciales
- 3000 Chemin de la Cote Ste-Catherine
- Montreal QC H3T 2A7
- Website: www.hec.ca/en/programs_training/phd/index.html
- Université du Québec à Montréal
- Département des Sciences Administratives
- 315 Ste-Catherine Est
- Montreal QC H2X 3X2
- Website: http://phdadm.esg.uqam.ca
The program represents a number of innovations in doctoral work in the field of administration. First, by cooperating, the four universities are able to make available to the program's students a diverse pool of approximately 250 professors qualified to direct doctoral-level study and research. Second, the program has been carefully developed to encourage independent, creative work on the part of its students, with close, personal contact with the professors. This program will appeal especially to the mature, experienced candidate with relatively well-defined interests. Across the four member universities, some courses are offered in English and some in French. (All papers may, however, be written in English or French.) This is viewed as a definite advantage of the program for those students who expect to work in Canada or francophone countries after graduation.
The program places considerable emphasis on the theoretical foundations of management and its underlying disciplines. Graduates of the program are expected to have: (1) some knowledge of all the main areas of management, (2) a thorough knowledge of one applied area of management, and one support discipline, (3) a complete command of the research methodologies used in management, and (4) some familiarity with modern theories and methods of the pedagogy of management.
The program consists of three phases: preparation, specialization, and dissertation.
Preparation – Phase I
Before entering the program, the student will have selected the area of specialization from the following areas/options:
- Information Systems
- Operations Management
- Organizational Behaviour
- Strategy and Organization
- NSERC CREATE*
- Environment Option**
Some students—notably those with strong master's degrees in administration or related disciplines—have a minimum of work in Phase I; others require up to one academic year of work.
Specialization – Phase II
In Phase II, students probe deeply into their chosen area of specialization. With their Advisory Committee, students work out an individual program of study, which takes about 18 months. The phase focuses on a specialization area and a support field. The specialization area could be one of the basic ones listed in Phase I (for example, marketing or operations management), a sub-area within one of these (such as organizational development within organizational behaviour), or an interdisciplinary area that combines two or more of these (such as behaviour aspects of accounting or international marketing).
The support field is selected to help the student develop a foundation of knowledge in a fundamental discipline that underlies the theory in administration. For example, a student in marketing might select psychology, sociology, or statistics. One in management policy might select political science or general systems theory, or perhaps even philosophy. Other choices are possible.
Students officially enter Phase II of the program when their Advisory Committee has been established and, together with the student, formally agrees on a proposal for the work to be done in Phase II. The Phase II Form (Advisory Committee) must be approved by the McGill and the Joint Doctoral Committees. This includes the following:
- Doctoral seminars in the specialization area; minimum four courses
- Any other existing graduate-level courses in the specialization area and support field deemed appropriate by the Advisory Committee; minimum two courses in support field
- Seminar on Research Methodology (MGMT 707, 3 credits) or equivalent approved graduate-level course
- Seminar in Pedagogy (MGMT 706, 3 credits) or Teaching and Learning in Higher Education (EDPH 689, 3 credits)
- Comprehensive Examination (MGMT 701, 0 credits)
- A publishable research paper (MGMT 720, 3 credits)
The Advisory Committee will normally consist of at least three persons; a Chair and others decided upon jointly by the Chair and the student. One of these members will typically come from the support field. Every student's Advisory Committee must have representation from at least two universities in the joint program.
Dissertation – Phase III
The third phase of the program consists of the dissertation in the course of which the student probes deeply into a well-defined research topic. The topic is developed with the Thesis Committee (at least three members), which may be the same as the Phase II Advisory Committee or may be reconstituted, again with representation from at least one of the other participating universities. The topic is approved formally by the Thesis Advisory Committee and, once the research is completed and the dissertation written, the student publicly defends the completed thesis. The Phase III Form (Advisory Committee) must be approved by the McGill and the Joint Doctoral Committees.
* NSERC CREATE Ph.D. option in Healthcare Operations and Information Management – Offered jointly by six Canadian universities: McGill, British Columbia, Ottawa, Queen's, Toronto, and Montréal; this Ph.D. program brings together expertise on healthcare processes, operations research, information systems, and telecommunications engineering.
|**Doctor of Philosophy (Ph.D.); Management — Environment|
The Ph.D. program option in Environment is intended to develop an understanding of how knowledge is transferred into action with regard to the environment. It provides a forum whereby students bring their disciplinary perspectives together and enrich each other's learning through structured courses, formal seminars, and informal discussions and networking.
Candidates normally hold a master's-level degree, with a strong academic record from a recognized university.
GMAT (or GRE-General Test) results are required for all applications to the doctoral program; this includes McGill master's students applying to the Ph.D. The minimum GMAT score required is 70% equivalency. Tests must have been written within the past five years.
Applicants to graduate studies whose mother tongue is not English, and who have not completed an undergraduate or graduate degree from a recognized foreign institution where English is the language of instruction or from a recognized Canadian institution (anglophone or francophone), must submit documented proof of competency in oral and written English. Before acceptance, appropriate exam results must be submitted directly from the TOEFL (Test of English as a Foreign Language) or IELTS (International English Language Testing Systems) Office. An institutional version of TOEFL is not acceptable. Applications will not be considered if a TOEFL or IELTS test result is not available. A minimum score of 100 for the Internet-based test, with each component score not less than 20, is required for admission. A minimum score of 7 for IELTS is required. Tests must have been written within the past two years.
Files will not be considered unless GMAT (or GRE-General Test) and TOEFL scores are received by the Application Deadline.
Students may apply for admission to one or more of the participating universities. These applications will be processed by the individual university to which the applicant has applied and by the Joint Committee of the four schools. Students' preferences will prevail when more than one participating university is prepared to accept them. The Ph.D. degree will be granted by the university that admits the student. The program requires a minimum full-time residency of six terms.
McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.
See Application Procedures for detailed application procedures.
For application deadlines, please consult the following website: www.mcgill.ca/desautels/programs/phd/admissions/deadline.
- Department of Mechanical Engineering
- Macdonald Engineering Building
- 817 Sherbrooke Street West, Room MD-270
- Montreal QC H3A 0C3
- Telephone (Admissions & Scholarships): 514-398-8869
- Telephone (All other inquiries): 514-398-6281
- Fax: 514-398-7365
- Email (Admissions & Scholarships): grad [dot] mecheng [at] mcgill [dot] ca
- Email (All other inquiries): gradcoordinator [dot] mecheng [at] mcgill [dot] ca
- Website: www.mcgill.ca/mecheng/grad
About Mechanical Engineering
Mechanical engineers are traditionally concerned with the conception, design, implementation, and operation of mechanical systems. Common fields of work include aerospace, energy, manufacturing, machinery, and transportation. Due to the broad nature of the discipline, there is usually a high demand for mechanical engineers with advanced training.
The Department includes more than 30 faculty members and 200 graduate students, and is housed primarily within the recently renovated Macdonald Engineering building. The Department contains state-of-the-art experimental facilities (including a major wind tunnel facility) and has extensive computational facilities. Professors within the Department collaborate widely with professors in other units, often through research centres including the Centre for Intelligent Machines (CIM); the McGill Institute for Advanced Materials (MIAM); and the Montreal Neurological Institute and Hospital (MNI). The research interests within the Department are very broad and fall largely within the following five areas:
- aerodynamics, fluids, and thermal engineering
- mechanics of materials and structures
- dynamics and control
- design and manufacturing
Within these areas, specific topics of research are given in the following:
Aerodynamics, fluids, and thermal engineering
Experimental fluid mechanics and aerodynamics, aeroelasticity, and aeroacoustics; theoretical fluid mechanics; turbulence; mixing in turbulent flows; fluid flow control; fluid-structure interactions; computational fluid dynamics, multidisciplinary optimization, and computer flow visualization; heat transfer; combustion, shock wave physics, energetic materials, high-speed reacting flows, hypersonic propulsion, and alternative fuels.
Mechanics of materials and structures
Composite materials: structural design, analysis, manufacturing, and processing; micro/nano mechanics; MEMS/NEMS; adaptronic structures; thermomechanics, wave propagation, and computational mechanics.
Dynamics and control
Multibody systems, legged and wheeled vehicles, compliant mechanisms, and kinematic geometry; tethered systems, lighter-than-air craft, and underwater vehicles; spacecraft dynamics and space robotics; modelling and simulation; fluid-structure interactions, nonlinear and chaotic dynamics; dynamics of bladed assemblies.
Design and manufacturing
Design theory and methodology, design optimization; biomimetics; machine tools and systems, manufacturing processes, and management and control; micro/nano machining; wear and comminution processes.
Biomechanics, biomaterials, blood and respiratory flows, mechanics of soft tissues, cardiovascular devices, image processing for medical diagnostics, voice production.
The Department offers programs of study leading to the M.Eng., M.Sc., and Ph.D. degrees in Mechanical Engineering. Both M.Eng. (Thesis) and M.Eng. (Non-Thesis) programs are offered.
There are several options for completing master’s degrees that do not involve the completion of a thesis. The M.Eng. (Non-Thesis) program has more extensive course requirements and will appeal to students who desire to gain both a broad understanding of subjects within Mechanical Engineering as well as in-depth information in a specific area. Two other non-thesis master’s degree options are described below.
|Master of Engineering (M.Eng.); Mechanical Engineering (Thesis) (45 credits)|
The M.Eng. (Thesis) program requires the completion of 16 credits of technical complementary courses, a seminar course, and a thesis. The thesis involves advanced research supervised by one or more professors who are internationally known in their field. This program prepares students for either an industrial research career or further academic research at the Ph.D. level.
|Master of Engineering (M.Eng.); Mechanical Engineering (Thesis) — Computational Science and Engineering (46 credits)|
For students who would like to concentrate on computational work for their research, the M.Eng. (Thesis) – Computational Science and Engineering (CSE) option is available. CSE is a rapidly growing multidisciplinary area with connections to the sciences, engineering, mathematics, and computer science. CSE focuses on the development of problem-solving methodologies and robust tools for the solution of scientific and engineering problems. In this program, students choose their complementary courses from within a list of scientific computing courses and courses that involve applications and specialized methods.
|Master of Engineering (M.Eng.); Mechanical Engineering (Non-Thesis) (45 credits)|
Students in this program must complete four required courses in addition to 16 credits of complementary courses and a seminar course. They also complete a project that is less involved than a thesis and may involve a limited research project, or a technical or design study. Graduates of this program are well-prepared for carrying out research and development in industry and may also proceed to further research at the Ph.D. level.
|Master of Engineering (M.Eng.); Aerospace Engineering (Non-Thesis) (45 credits)|
The M.Eng. Aerospace degree is offered to students who wish to specialize in the general area of aerospace engineering. This degree is given in conjunction with Concordia University, École Polytechnique, Université Laval, Université de Sherbrooke, and École de Technologie Supérieure. Students registered at McGill are required to take two courses from two other institutions.
The aerospace industry is strongly established in Quebec. Representatives of the aerospace industry therefore requested that measures be taken to provide for qualified scientists in aerospace. Five universities offering courses in engineering came together to offer a master’s degree program in the field of aeronautics and space technology. This program is offered to students who wish to specialize in these disciplines. The industry’s participation is a special feature of this program. The universities and the participating industries, with the cooperation of the Centre of Aerospace Manpower Activities in Quebec (CAMAQ), have formed a Coordinating Committee, CIMGAS, to arrange for industrial internships and case study courses for the students and to implement specific program developments to meet the needs of the industry.
The M.Eng. (Aerospace) program requires a minimum of 45 credits, including an “Industrial Stage” (i.e., engineering work in an aerospace industry) of four months. Enrolment is limited to the number of industrial stages available, so admission to the program is typically quite competitive. While intended to be a full-time program, the M.Eng. Aerospace program may be completed on a part-time basis over a maximum of five years. By the time of completion of the program, graduates are extremely well-prepared to enter into a career in the aerospace industry.
Depending on their background, students would specialize in one of the four areas:
|Master of Management (M.M.); Manufacturing Management (Non-Thesis) (56 credits)|
This program is currently not offered
The Master in Manufacturing Management (M.M.M.) program attracts business professionals from around the world who wish to pursue a career in the effective management of global operations and supply chain. It is a professionally-oriented graduate program offered jointly through the Faculties of Engineering and Management, aimed at those candidates with engineering or science backgrounds.
In just eleven months of academic studies, M.M.M. students sharpen their expertise in supply chain and operations through an intensive program that includes:
Additionally, students are exposed to the latest trends and developments in management and participate in professional development seminars to leverage their communication and leadership skills. After less than one year of studies, participants complete a paid work term at an industrial location. This is a unique opportunity to work on a real-world project with an M.M.M. partner company in North America.
|Master of Science (M.Sc.); Mechanical Engineering (Thesis) (45 credits)|
Please consult the Department for more information on this program.
|Doctor of Philosophy (Ph.D.); Mechanical Engineering|
In the Ph.D. program, students are required to demonstrate a significant new contribution to their field of research, as documented in an externally reviewed thesis. The research is carried out under the supervision of professors who are leaders in their field. Since research in Mechanical Engineering is often interdisciplinary in nature, it is common for Ph.D. students to have a co-supervisor in addition to their principle supervisor. Graduates from this program typically proceed to careers in research in either industrial or academic environments.
Mechanical Engineering Admission Requirements and Application Procedures
The general rules of Graduate and Postdoctoral Studies apply. Candidates who come from other institutions are expected to have an academic background equivalent to the undergraduate curriculum in mechanical engineering at McGill or to make up any deficiencies in a Qualifying year.
Applicants to the M.Eng. (Thesis) program must hold an undergraduate degree (or equivalent) in Engineering. Applicants who hold an undergraduate degree in a non-Engineering discipline—typically the Physical Sciences—may apply for the M.Sc. (Thesis) program, which is governed by the same regulations as the M.Eng. (Thesis) program.
Applicants to the M.Eng. (Non-Thesis) program must hold an undergraduate degree (or equivalent) in Mechanical Engineering.
Applicants to the M.Eng. (Aerospace) program must hold an undergraduate degree (or equivalent) in Engineering.
Applicants to the Ph.D. program must have successfully completed a master's degree program (or equivalent) in Engineering or the Physical Sciences. In exceptional circumstances, students with outstanding performance at the bachelor's level may be offered direct entry into the Ph.D. program (Ph.D. 1).
In the case of all programs, applicants must have successfully completed their prior degree(s) with a minimum CGPA equivalent to 3.3 on a scale of 4.0. Satisfaction of these minimum requirements does not guarantee admission. Applicants to graduate studies whose mother tongue is not English, and who have not completed an undergraduate or graduate degree from a recognized foreign institution where English is the language of instruction or from a recognized Canadian institution (anglophone or francophone), must submit official results of either a TOEFL or an IELTS test. The minimum score required is 92 for the Internet-based TOEFL test, with each component score not less than 20 (or 580 on the paper-based test, with a minimum of 4.0 on the “Test of Written English”); or a minimum overall band of 7.0 on the IELTS test.
McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.
See Application Procedures for detailed application procedures.
Please consult www.mcgill.ca/mecheng/grad for further details on required application documents.
The application deadlines listed here are set by the Department of Mechanical Engineering and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at www.mcgill.ca/gps/contact/graduate-program.
|Fall: Jan. 15||Fall: Jan. 15||Fall: Jan. 15|
|Winter: Oct. 15||Winter: Sept. 1||Winter: Oct. 15|
|Summer: N/A||Summer: N/A||Summer: N/A|
Admission to graduate studies is competitive; accordingly, late and/or incomplete applications are considered only as time and space permit.