Quick Links

biomechanics

Surgery, Experimental

Programs | Application Procedures and Deadlines

Surgery, Experimental

Location

  • Surgery, Experimental
  • Montreal General Hospital, Room C9-169
  • 1650 Cedar Avenue
  • Montreal QC H3G 1A4
  • Canada
  • Graduate Program Coordinator: Sharon Turner
  • Telephone: 514-934-1934, ext. 42837
  • Fax: 514-934-8289
  • Email: gradstudies [dot] surgery [at] mcgill [dot] ca
  • Website: www.mcgill.ca/experimentalsurgery

About Experimental Surgery

Experimental Surgery offers graduate programs leading to M.Sc. and Ph.D. degrees. The Experimental Surgery department is responsible for the administration of the graduate programs and allows excellent opportunities for training under the supervision of professors located in the research institutes of the different McGill teaching hospitals. The scope of the research and close connections with other centres and departments of McGill provide ample opportunities for collaboration. The research in the Department covers a broad range of topics from tissue repair and regeneration to cancer cell biology, sexual dysfunction, and surgical health outcomes.

A list of research directors and a description of their research topics, as well as application forms may be obtained from our website (www.mcgill.ca/experimentalsurgery).

Master of Science (M.Sc.); Experimental Surgery (Thesis) (45 credits)
The M.Sc. program is intended for students wishing to pursue careers in academia, the medical field, or industry. Thesis projects available in the various laboratories of the Department are multidisciplinary and ensure that students are exposed to a broad spectrum of research projects and experimental approaches. Students who have achieved superior progress in their research have the option to transfer to the Ph.D. program, waiving the M.Sc. thesis submission.
Master of Science (M.Sc.); Experimental Surgery (Thesis) — Surgical Education (45 credits)
This concentration's focus is on surgical education, and it is intended for students wishing to pursue careers in academia, the medical field, or industry. Thesis projects available in the various laboratories of the Department are multidisciplinary and ensure that students are exposed to a broad spectrum of research projects and experimental approaches. Students who have achieved superior progress in their research have the option to transfer to the Ph.D. program, waiving the M.Sc. thesis submission.
Master of Science (M.Sc.); Experimental Surgery (Thesis) — Surgical Innovation (45 credits)
This concentration's focus is on surgical innovation, and it is intended for students wishing to pursue careers in academia, the medical field, or industry. Thesis projects available in the various laboratories of the Department are multidisciplinary and ensure that students are exposed to a broad spectrum of research projects and experimental approaches. Students who have achieved superior progress in their research have the option to transfer to the Ph.D. program, waiving the M.Sc. thesis submission.
Doctor of Philosophy (Ph.D.); Experimental Surgery
The doctoral program is intended for students with excellent academic standing who wish to pursue research-focused careers in academia, the medical field, or industry. Thesis projects, available in the various laboratories of the Department, ensure that students receive in-depth training and exposure to varied conceptual frameworks and a wide array of experimental strategies.
Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Experimental Surgery Admission Requirements and Application Procedures

Admission Requirements

M.Sc. Programs

Usually a B.Sc., M.D., or D.V.M. degree is required, with a minimum CGPA of 3.2/4.0. Applications will be accepted from candidates sponsored by a research supervisor willing to provide laboratory space, funding, and direction for their research work.

Ph.D. Program

Admission is usually from one of the M.Sc. programs either upon completion of the M.Sc. degree, or by transfer from the first year of M.Sc. to the second year of Ph.D. studies. Request for such transfer is to be made in writing by the thesis supervisor during the candidate's first year of M.Sc. studies, not later than March 30 for students enrolled in September, or October 15 for those registered in January. The student must then apply for admission to the Ph.D. program in order to effect the transfer. Transfer is granted on the basis of an examination administered by the student's Research Advisory Committee. Exceptional students with a minimum 3.5/4.0 CGPA may apply directly to the Ph.D. program.

Students with an M.Sc. degree from other departments or from other recognized universities whose M.Sc. topic is closely related to the subject of their Ph.D. research may be admitted directly into the Ph.D. program, at the level of Ph.D. 2, at the discretion of the Department. Exceptional students with a master's degree unrelated to their proposed research may be admitted to Ph.D. 1.

Application Procedures

McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.

See Application Procedures for detailed application procedures.

Additional Requirements

The items and clarifications below are additional requirements set by this department:
  • Curriculum Vitae
  • Research Proposal
  • Acceptance by a research supervisor
  • Memorandum of Agreement

Application Deadlines

The application deadlines listed here are set by Experimental Surgery and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at: www.mcgill.ca/gps/contact/graduate-program.

Canadian International Special/Exchange/Visiting
Fall: June 1 Fall: April 14 Fall: Same as Canadian/International
Winter: Oct. 15 Winter: Sept. 5 Winter: Same as Canadian/International
Summer: N/A Summer: N/A Summer: N/A

Admission to graduate studies is competitive; accordingly, late and/or incomplete applications are considered only as time and space permit.

Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Mechanical Engineering

Programs | Application Procedures and Deadlines

 

Mechanical Engineering

Location

  • Department of Mechanical Engineering
  • Macdonald Engineering Building
  • 817 Sherbrooke Street West, Room MD-270
  • Montreal QC H3A 0C3
  • Canada
  • Telephone (Admissions & Scholarships): 514-398-8869
  • Telephone (All other inquiries): 514-398-6281
  • Fax: 514-398-7365
  • Email (Admissions & Scholarships): grad [dot] mecheng [at] mcgill [dot] ca
  • Email (All other inquiries): gradcoordinator [dot] mecheng [at] mcgill [dot] ca
  • Website: www.mcgill.ca/mecheng/grad

About Mechanical Engineering

Mechanical engineers are traditionally concerned with the conception, design, implementation, and operation of mechanical systems. Common fields of work include aerospace, energy, manufacturing, machinery, and transportation. Due to the broad nature of the discipline, there is usually a high demand for mechanical engineers with advanced training.

The Department includes more than 30 faculty members and 200 graduate students, and is housed primarily within the recently renovated Macdonald Engineering building. The Department contains state-of-the-art experimental facilities (including a major wind tunnel facility) and has extensive computational facilities. Professors within the Department collaborate widely with professors in other units, often through research centres including the Centre for Intelligent Machines (CIM); the McGill Institute for Advanced Materials (MIAM); and the Montreal Neurological Institute and Hospital (MNI). The research interests within the Department are very broad and fall largely within the following five areas:

  • aerodynamics, fluids, and thermal engineering
  • mechanics of materials and structures
  • dynamics and control
  • design and manufacturing
  • bioengineering

Within these areas, specific topics of research are given in the following:

Aerodynamics, fluids, and thermal engineering

Experimental fluid mechanics and aerodynamics, aeroelasticity, and aeroacoustics; theoretical fluid mechanics; turbulence; mixing in turbulent flows; fluid flow control; fluid-structure interactions; computational fluid dynamics, multidisciplinary optimization, and computer flow visualization; heat transfer; combustion, shock wave physics, energetic materials, high-speed reacting flows, hypersonic propulsion, and alternative fuels.

Mechanics of materials and structures

Composite materials: structural design, analysis, manufacturing, and processing; micro/nano mechanics; MEMS/NEMS; adaptronic structures; thermomechanics, wave propagation, and computational mechanics.

Dynamics and control

Multibody systems, legged and wheeled vehicles, compliant mechanisms, and kinematic geometry; tethered systems, lighter-than-air craft, and underwater vehicles; spacecraft dynamics and space robotics; modelling and simulation; fluid-structure interactions, nonlinear and chaotic dynamics; dynamics of bladed assemblies.

Design and manufacturing

Design theory and methodology, design optimization; biomimetics; machine tools and systems, manufacturing processes, and management and control; micro/nano machining; wear and comminution processes.

Bioengineering

Biomechanics, biomaterials, blood and respiratory flows, mechanics of soft tissues, cardiovascular devices, image processing for medical diagnostics, voice production.

Programs Offered

The Department offers programs of study leading to the M.Eng., M.Sc., and Ph.D. degrees in Mechanical Engineering. Both M.Eng. (Thesis) and M.Eng. (Non-Thesis) programs are offered.

There are several options for completing master’s degrees that do not involve the completion of a thesis. The M.Eng. (Non-Thesis) program has more extensive course requirements and will appeal to students who desire to gain both a broad understanding of subjects within Mechanical Engineering as well as in-depth information in a specific area. Two other non-thesis master’s degree options are described below.

Master of Engineering (M.Eng.); Mechanical Engineering (Thesis) (45 credits)
The M.Eng. (Thesis) program requires the completion of 16 credits of technical complementary courses, a seminar course, and a thesis. The thesis involves advanced research supervised by one or more professors who are internationally known in their field. This program prepares students for either an industrial research career or further academic research at the Ph.D. level.
Master of Engineering (M.Eng.); Mechanical Engineering (Thesis) — Computational Science and Engineering (46 credits)
For students who would like to concentrate on computational work for their research, the M.Eng. (Thesis) – Computational Science and Engineering (CSE) option is available. CSE is a rapidly growing multidisciplinary area with connections to the sciences, engineering, mathematics, and computer science. CSE focuses on the development of problem-solving methodologies and robust tools for the solution of scientific and engineering problems. In this program, students choose their complementary courses from within a list of scientific computing courses and courses that involve applications and specialized methods.
Master of Engineering (M.Eng.); Mechanical Engineering (Non-Thesis) (45 credits)
Students in this program must complete four required courses in addition to 16 credits of complementary courses and a seminar course. They also complete a project that is less involved than a thesis and may involve a limited research project, or a technical or design study. Graduates of this program are well-prepared for carrying out research and development in industry and may also proceed to further research at the Ph.D. level.
Master of Engineering (M.Eng.); Aerospace Engineering (Non-Thesis) (45 credits)

The M.Eng. Aerospace degree is offered to students who wish to specialize in the general area of aerospace engineering. This degree is given in conjunction with Concordia University, École Polytechnique, Université Laval, Université de Sherbrooke, and École de Technologie Supérieure. Students registered at McGill are required to take two courses from two other institutions.

The aerospace industry is strongly established in Quebec. Representatives of the aerospace industry therefore requested that measures be taken to provide for qualified scientists in aerospace. Five universities offering courses in engineering came together to offer a master’s degree program in the field of aeronautics and space technology. This program is offered to students who wish to specialize in these disciplines. The industry’s participation is a special feature of this program. The universities and the participating industries, with the cooperation of the Centre of Aerospace Manpower Activities in Quebec (CAMAQ), have formed a Coordinating Committee, CIMGAS, to arrange for industrial internships and case study courses for the students and to implement specific program developments to meet the needs of the industry.

The M.Eng. (Aerospace) program requires a minimum of 45 credits, including an “Industrial Stage” (i.e., engineering work in an aerospace industry) of four months. Enrolment is limited to the number of industrial stages available, so admission to the program is typically quite competitive. While intended to be a full-time program, the M.Eng. Aerospace program may be completed on a part-time basis over a maximum of five years. By the time of completion of the program, graduates are extremely well-prepared to enter into a career in the aerospace industry.

Depending on their background, students would specialize in one of the four areas:

  1. Aeronautics and Space Engineering
  2. Avionics and Control
  3. Aerospace Materials and Structures
  4. Virtual Environment
Master of Management (M.M.); Manufacturing Management (Non-Thesis) (56 credits)

This program is currently not offered

The Master in Manufacturing Management (M.M.M.) program attracts business professionals from around the world who wish to pursue a career in the effective management of global operations and supply chain. It is a professionally-oriented graduate program offered jointly through the Faculties of Engineering and Management, aimed at those candidates with engineering or science backgrounds.

In just eleven months of academic studies, M.M.M. students sharpen their expertise in supply chain and operations through an intensive program that includes:

  • A challenging curriculum
  • Extensive industrial interaction
  • Innovative research projects

Additionally, students are exposed to the latest trends and developments in management and participate in professional development seminars to leverage their communication and leadership skills. After less than one year of studies, participants complete a paid work term at an industrial location. This is a unique opportunity to work on a real-world project with an M.M.M. partner company in North America.

Master of Science (M.Sc.); Mechanical Engineering (Thesis) (45 credits)
Please consult the Department for more information on this program.
Doctor of Philosophy (Ph.D.); Mechanical Engineering
In the Ph.D. program, students are required to demonstrate a significant new contribution to their field of research, as documented in an externally reviewed thesis. The research is carried out under the supervision of professors who are leaders in their field. Since research in Mechanical Engineering is often interdisciplinary in nature, it is common for Ph.D. students to have a co-supervisor in addition to their principle supervisor. Graduates from this program typically proceed to careers in research in either industrial or academic environments.
Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Mechanical Engineering Admission Requirements and Application Procedures

Admission Requirements

The general rules of Graduate and Postdoctoral Studies apply. Candidates who come from other institutions are expected to have an academic background equivalent to the undergraduate curriculum in mechanical engineering at McGill or to make up any deficiencies in a Qualifying year.

Applicants to the M.Eng. (Thesis) program must hold an undergraduate degree (or equivalent) in Engineering. Applicants who hold an undergraduate degree in a non-Engineering discipline—typically the Physical Sciences—may apply for the M.Sc. (Thesis) program, which is governed by the same regulations as the M.Eng. (Thesis) program.

Applicants to the M.Eng. (Non-Thesis) program must hold an undergraduate degree (or equivalent) in Mechanical Engineering.

Applicants to the M.Eng. (Aerospace) program must hold an undergraduate degree (or equivalent) in Engineering.

Applicants to the Ph.D. program must have successfully completed a master's degree program (or equivalent) in Engineering or the Physical Sciences. In exceptional circumstances, students with outstanding performance at the bachelor's level may be offered direct entry into the Ph.D. program (Ph.D. 1).

In the case of all programs, applicants must have successfully completed their prior degree(s) with a minimum CGPA equivalent to 3.3 on a scale of 4.0. Satisfaction of these minimum requirements does not guarantee admission. Applicants to graduate studies whose mother tongue is not English, and who have not completed an undergraduate or graduate degree from a recognized foreign institution where English is the language of instruction or from a recognized Canadian institution (anglophone or francophone), must submit official results of either a TOEFL or an IELTS test. The minimum score required is 92 for the Internet-based TOEFL test, with each component score not less than 20 (or 580 on the paper-based test, with a minimum of 4.0 on the “Test of Written English”); or a minimum overall band of 7.0 on the IELTS test.

Application Procedures

McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.

See Application Procedures for detailed application procedures.

Please consult www.mcgill.ca/mecheng/grad for further details on required application documents.

Additional Requirements

The items and clarifications below are additional requirements set by this department:
  • two official Referee Reports
  • Personal Statement – one page
  • Curriculum Vitae – please include a list of publications, if relevant
  • proof of French proficiency (for Aerospace program only)

Application Deadlines

The application deadlines listed here are set by the Department of Mechanical Engineering and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at www.mcgill.ca/gps/contact/graduate-program.

Canadian International Special/Exchange/Visiting
Fall: Jan. 15 Fall: Jan. 15 Fall: Jan. 15
Winter: Oct. 15 Winter: Sept. 15 Winter: Oct. 15
Summer: N/A Summer: N/A Summer: N/A

Please also consult the Departmental website for the application deadlines: www.mcgill.ca/mecheng/grad/date.

Admission to graduate studies is competitive; accordingly, late and/or incomplete applications are considered only as time and space permit.

Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 31, 2014).

Chemical Engineering

Chemical Engineering

Location

  • Department of Chemical Engineering
  • M.H. Wong Building
  • 3610 University Street
  • Montreal QC H3A 0C5
  • Canada
  • Telephone: 514-398-4494
  • Fax: 514-398-6678
  • Email: gradinfo [dot] chemeng [at] mcgill [dot] ca
  • Website: www.mcgill.ca/chemeng

About Chemical Engineering

The Department offers programs leading to the Master of Engineering and the Doctor of Philosophy degrees.

The Department's offices and research laboratories are located in the M.H. Wong Building. Collectively, 17 members of the academic staff conduct research programs in almost all areas of modern chemical engineering, drawing upon theoretical, computational, and experimental methodologies. The Department's faculty have been well supported by government programs (e.g., NSERC, FQRNT, CIHR, CFI, and CRC) and industry through research partnerships and contracts. Our laboratories are equipped with state-of-the-art equipment, and we attract outstanding graduate students from all over the world. Our main current research areas are briefly described below.

Advanced materials and polymers – The Department has an internationally recognized research program in structural, functional, and biological materials, spanning synthesis, characterization, processing, and modelling activities, with strong links to academic, government, and industrial research centres. Areas include plasma processing (e.g., nanofluids, carbon nanotubes, advanced coatings) and polymeric or “soft” materials research (e.g., self-assembling or structured materials; complex fluids; liquid crystals; colloids and soft composites; and novel polymerization methods). Applications of the research are targeted toward the development of next-generation, high-density storage media, functional coatings, electronic devices, composite fluids and “smart” materials, to name but a few.

Biomedical engineering and biotechnology – The majority of professors in the Department are involved with biological engineering. This is a very broad research area that includes biotechnology and biomedical engineering. Biotechnology is an integrated approach of combining life sciences (e.g., biochemistry and cell biology) with process engineering, design, and scale-up principles. This is the use of biological systems or living organisms to do practical things and manufacture valuable products such as biohydrogen, drugs, therapeutics, polymers, and surfactants. Biomedical engineering combines the principles of engineering with medicine as well as life sciences and biology. Examples of this include drug delivery methods, biomedical devices, cardiovascular and other biomechanics, biomaterials for applications such as artificial implants, and products such as bacteriophages for alternative treatment techniques.

Energy – Energy usage has increased significantly since the steam engine launched the Industrial Revolution. This is due to our ever-growing human population, increased production of consumer goods, and rising use of energy-intensive devices such as automobiles, cell phones, computers, and climate comfort units. Instability in oil production and the inevitable depletion of fossil fuels is forcing scientists to find new resources and develop new technologies to keep pace with elevating energy demands. The Chemical Engineering Department at McGill University has an extensive research effort related to energy including hydrogen production from microbial conversion of waste streams and electrolysis of water; hydrogen storage and molecular modelling of hydrogen storage; hydrogen fuel cells and solid oxide fuel cells; methane recovery, storage, and transportation using gas hydrates; and oil and gas flow assurance; as well as plasma technology to produce nanomaterials for energy conversion/storage devices.

Environmental engineering – Environmental engineering is the application of science and engineering principles to protect the environment and remediate contaminated sites. Chemical and environmental engineers develop and design processes to provide healthy air, water, and soil. They also develop green products and sustainable processes. Using their background in process engineering, environmental chemistry, earth sciences, and biology, engineers have to meet the current and future challenges in protecting, managing, and restoring the environment. Ongoing research in the area of environmental engineering in our department includes the study of wastewater treatment processes; biodegradation of emerging pollutants; advanced oxidation processes; transport and fate of waterborne contaminants; production of alternative fuels; environmental nanotechnology for remediation of contaminated soils and waters; green chemistry for safer products and processes; and development of biosensors for pollutant detection.

Plasma science and engineering – Plasma is often called the fourth state of matter, being the result of raising a gas to such an energy level that it contains conducting particles such as electrons and ions. While most of the universe is in a plasma state, plasmas on earth are relatively uncommon. Plasma science and engineering research examines the use of the plasma state to produce physical and chemical changes to matter (bulk and surfaces). Plasmas may be in non-equilibrium, a state in which the overall gas is at low temperature and only the electrons are very energetic, or in the equilibrium state, where the temperature of all constituents is essentially equal and may range from thousands to tens of thousands of Kelvins (e.g., the sun’s surface is in a plasma state, at a temperature of about 6,000K). Non-equilibrium plasmas are used in such applications as the deposition of coatings and functionalization of surfaces, the treatment of cells, and the treatment of harmful gases and liquids. Thermal plasmas are used in the synthesis of advanced materials such as nanoparticles, carbon nanotubes, and coatings, as well as in the treatment of toxic and persistent wastes and metallurgical processing. Both thermal and non-thermal plasmas are currently used and studied in the McGill Plasma Laboratory, which forms one of the founding groups of the Plasma-Québec Centre.

Master of Engineering (M.Eng.); Chemical Engineering (Thesis) (45 credits)
The M.Eng. in Chemical Engineering (Thesis) is a research-oriented degree that allows the candidates to refine their skills by expanding their knowledge of chemical engineering through coursework and a research thesis under the supervision of a Faculty member (professor). The M.Eng. (Thesis) program offers advanced training in not only fundamentals but also research methods and is, therefore, the more suitable option for those whose primary interest is research. Graduates of this degree either pursue a Ph.D. or work in industry.
Master of Engineering (M.Eng.); Chemical Engineering (Non-Thesis) (45 credits)
The M.Eng. in Chemical Engineering (Non-Thesis) is a course-oriented degree, which includes a short project completed under the supervision of a Faculty member (professor). Through the program, graduate students can advance their knowledge in various chemical engineering disciplines through coursework and technical training.
Master of Engineering (M.Eng.); Chemical Engineering (Non-Thesis) — Environmental Engineering (45 credits)
The M.Eng. in Chemical Engineering (Non-Thesis) – Environmental Engineering is a specialized version of the M.Eng. in Chemical Engineering (Non-Thesis). This inter-departmental graduate program leads to a master’s degree in Environmental Engineering. The objective of the program is to train environmental professionals at an advanced level. The program is designed for individuals with an undergraduate degree in engineering. This Non-Thesis degree falls within the M.Eng. and M.Sc. programs which are offered in the Departments of Bioresource, Chemical, Civil, and Mining, Metals and Materials Engineering. The Environmental Engineering program emphasizes interdisciplinary fundamental knowledge, practical perspective and awareness of environmental issues. It is a course-oriented degree, which includes prescribed courses related to environmental engineering and a short project completed under the supervision of a Faculty member (professor). Graduate students can specialize in environmental engineering through this program offered in collaboration with the McGill School of Environment.
Doctor of Philosophy (Ph.D.); Chemical Engineering
The Ph.D. is a research degree requiring few courses and an extensive thesis, conducted under the supervision of a Faculty member (professor), that makes a distinct contribution to knowledge. The Ph.D. program prepares candidates for a career in teaching, research and/or development and graduates are expected to have acquired autonomy in conducting research. McGill also offers various workshops that provide general, transitional, and professional skills development opportunities, preparing candidates for various career options following the Ph.D.
Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Chemical Engineering Admission Requirements and Application Procedures

Admission Requirements

Admission to graduate studies requires a minimum CGPA of 3.0/4.0 (or equivalent) for the complete bachelor's program, or a minimum GPA of 3.2/4.0 (or equivalent) in the last two years of full-time studies in an undergraduate program. Applicants to graduate studies whose mother tongue is not English, and who have not completed an undergraduate or graduate degree from a recognized foreign institution where English is the language of instruction or from a recognized Canadian institution (anglophone or francophone), must achieve a minimum TOEFL score of 90 on the Internet-based test with each component score not less than 20 (577 on the paper-based test) prior to admission.

M.Eng. (Thesis), M.Eng. (Non-Thesis)

Admission requires a bachelor's degree (or equivalent) in engineering or science disciplines.

Ph.D.

Admission requires a master's degree (or equivalent) from a recognized university. Students in the Department's M.Eng. (Thesis) program may petition to transfer to the Ph.D. program after one year without submitting the master’s thesis following a formal “fast-track” procedure. At their request, applicants (without a master's degree) with exceptionally high Academic Standing and outstanding research potential will be considered for direct admission to the Ph.D. program.

Application Procedure

McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.

See Application Procedures for detailed application procedures.

Additional Requirements

  • Reference Letter – Ph.D. applicants must submit a letter of recommendation from their master's research supervisor.

Application Deadlines

The application deadlines listed here are set by graduate departments, and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at www.mcgill.ca/gps/contact/graduate-program.

Canadian International Special/Exchange/Visiting
Fall: Jan. 15 Fall: Jan. 15 Fall: Jan. 15
Winter: Oct. 15 Winter: Sept. 15 Winter: Same as Canadian/International
Summer: Jan. 15 Summer: Jan. 15 Summer: Jan. 15

Admission to graduate studies is competitive; accordingly, late and/or incomplete applications are considered only as time and space permit.

Application Deadlines differ for International and Canadian (and Permanent Resident) students to allow time to obtain a visa.

Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Kinesiology and Physical Education

 Programs | Application Procedures and Deadlines

Kinesiology and Physical Education

Location

  • Department of Kinesiology and Physical Education
  • Sir Arthur Currie Memorial Gymnasium
  • 475 Pine Avenue West
  • Montreal QC H2W 1S4
  • Canada
  • Telephone: 514-398-4184, ext. 0302
  • Fax: 514-398-4186
  • Email: eileen [dot] leduc [at] mcgill [dot] ca
  • Website: www.mcgill.ca/edu-kpe

About Kinesiology and Physical Education

The Department of Kinesiology and Physical Education provides a large variety of research opportunities in a number of areas related to human health and physical activity.

Master's Programs

In Exercise Physiology, research is being conducted on obesity treatment, public health surveillance, and health disparities; biology and physiology of aging skeletal muscle; adaptive plasticity of skeletal muscle in health, disease, and aging; the role of mitochondria in skeletal muscle health, disease, and aging; interventions to protect and/or restore mass and function of aging muscle; biology and physiology of the aging heart; clinical and integrative exercise and cardio-respiratory physiology; COPD research; and muscle physiology and biophysics.

Other research in Biomechanics includes specialization in ergonomics, motor control, fatigue, and musculoskeletal disorders; locomotion and gait research; applied ice hockey research; and neurophysiology and rehabilitation.

In Exercise and Health Psychology, research is presently underway examining the psychosocial determinants of health behaviour, body-related emotions, and physical self; motivation in youth sport and physical activity; school and community-based physical activity promotion; and physical education and health development.

In Sports Psychology, research questions examine determinants of coaching expertise, team building, psychology of athletic injuries (concussions), and hockey violence.

Research in Adapted Physical Activity examines issues of self-regulation of individuals with movement difficulties, physical activity in persons with attention-deficit hyperactivity disorder (ADHD), play and movement skill proficiency, perceptions and professional skill development of physical education teachers, motor behaviour, and autism.

Ph.D. (Ad Hoc)

The Department of Kinesiology and Physical Education also offers the possibility of directly entering a Ph.D. program on an ad hoc basis, or, with the permission of the supervisor and the approval of the Graduate Program Director, exceptional students may transfer from the master's program to the ad hoc Ph.D. program.

Master of Arts (M.A.); Kinesiology and Physical Education (Thesis) (45 credits) and Master of Science (M.Sc.); Kinesiology and Physical Education (Thesis) (45 credits)
The thesis programs in Kinesiology and Physical Education are designed to help students develop research skills and expertise in their selected areas of research. All students must have a physical science background to study in the M.Sc. program and a social-psychological background to study in the M.A. program. Researchers in our program have their own research facilities. These research programs often lead to pursuits in research and teaching careers, or in professional careers in kinesiology. For example, many students pursue careers in fitness/wellness, exercise rehabilitation settings, and sport science settings. Students may become teachers, health club directors, work in cardiac rehabilitation centres, and/or become exercise prescription counsellors.
Master of Arts (M.A.); Kinesiology and Physical Education (Non-Thesis) (45 credits) and Master of Science (M.Sc.); Kinesiology and Physical Education (Non-Thesis) (45 credits)

The non-thesis programs are not being offered in 2014–2015.

The non-thesis programs in Kinesiology and Physical Education are intended to help students develop professional skills related to their careers in kinesiology and physical education who do not have an interest in research. Students will work with a supervisor and will take a number of courses in the academic areas of interest and will also complete a research project in the area of interest.

Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).

Kinesiology and Physical Education Admission Requirements and Application Procedures

Admission Requirements

  1. An undergraduate degree in Physical and Health Education, Exercise Science, Kinesiology, or its equivalent is required.
  2. A minimum academic standing equivalent to a CGPA of 3.0 out of 4.0 or a GPA of 3.2 out of 4.0 in the last two years of full-time studies.

Application Procedures

McGill’s online application form for graduate program candidates is available at www.mcgill.ca/gradapplicants/apply.

See Application Procedures for detailed application procedures.

Application Deadlines

The application deadlines listed here are set by the Department of Kinesiology and Physical Education and may be revised at any time. Applicants must verify all deadlines and documentation requirements well in advance on the appropriate McGill departmental website; please consult the list at www.mcgill.ca/gps/contact/graduate-program.

Canadian International Special/Exchange/Visiting
Fall: Feb. 15 Fall: Feb. 15 Fall: June 30
Winter: Sept. 1 Winter: Sept. 1 Winter: Sept. 1
Summer: N/A Summer: N/A Summer: N/A

Admission to graduate studies is competitive; accordingly, late and/or incomplete application are considered only as time and space permit.

Taken from Programs, Courses and University Regulations 2014-2015 (last updated Jul. 22, 2014).